| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- file-backed guest RAM (launcher memory-backend-file share=on) and
in-kernel GPA->HPA translation through the shared file page cache
(read_cache_page + page_to_phys + pfn_valid), opened O_LARGEFILE;
new default-off gsp_phys_guest_mem parameter
- debugfs gsp-phys-guest-ram (path + gpa/off/size ranges) and
gsp-phys-guest-gpa (one pinned GPA per boot); rm-call triggers 6/7 run
host->guest and guest->host 4 KiB CE copies; trigger 8 is a PTE
self-test through a fresh slot
- guest page-table slots are pre-built during ladder stage 3: runtime
PTE writes into an already-walked page-table line are not observed
without a TLB invalidate
- guest RAM layout (q35 4.2, 4 GiB): below-4G GPA == file offset,
above-4G offset = GPA - 0x80000000 (2 GiB PCI hole)
- tests: tools/test/gpage_test.c guest probe; docs + STATE-CURRENT
record the live green (G2H/W2G with semaphore release, guest observed
the write, smoke ALL OK 64/64, clean latched release)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Host-freeze fix bundle (validated 2/2 supervised cycles):
- power unlock now latches D0/D3cold by default (new gsp_phys_repower,
default 0); releasing the claim can no longer power-gate the board and
hard-freeze the host on resume
- bounded post-rebind readiness gate before dropping the locks; bounded D0
settle/verify before the unbind
- READY means a live GSP-RM session: the async worker and the module-owned
join only expose READY when init-done is seen and no unload was sent;
otherwise the claim is released fail-open
- FWSEC reads DMEM0/IMEM back before STARTCPU and fails fast when the
staging is not visible
- the claim harness leaves the board latched by default and takes
--restore-power to opt back into the old restore
Guest-wiring:
- P2: generation-keyed fn65 static-config snapshot cache plus a default-off
identity overlay (new gsp_phys_static_live) for name/short-name/VBIOS;
the probe cycle runs once per backend generation at READY
- P3: default-off read-only RM_CONTROL forwarding whitelist (new
gsp_phys_ctrl_forward) with emulated-handle translation to the adopted
server handles and full emulation fallback
- P5 wave 1: default-off shadow execution of guest CE pushes on the ladder
channel (new gsp_phys_work_forward) via a dedicated ordered work item;
the ladder stage-4 submission is refactored into a shared bounded helper
and the software release path stays authoritative
Live: module-owned boot to init-done, guest smoke ALL OK 64/64 with P2/P3
enabled, 514 shadow copies observed on the physical CE; all cycles released
cleanly with WPR2 down and no reboot.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the gsp_phys_mdev_owned ownership selector (default 0: unchanged
load-time module-owned claim/boot). With 1, module load claims nothing;
the first mdev create starts a refcounted backend session whose
claim+boot runs asynchronously from a work item, so mdev create and
init_work never block. The last mdev remove releases after the emulation
thread is stopped. Failures are fail-open: the backend stays OFF and the
mdev keeps serving the emulation path.
nv_vgpu_exit now gates the session STOPPING under the session lock,
drains the emulation threads via mdev_unregister_driver(), and only then
releases the claim; the module-owned path keeps its previous release
position. A start while STOPPING is refused and a concurrent second
stopper cannot release twice. No forwarding is added.
|
| | |
|
| |
|
|
| |
Adds a minimal msgq producer on the command queue (element layout, checksum, sequence, dma_wmb before writePtr, doorbell) and submits the UNLOADING_GUEST_DRIVER RPC so GSP-RM shuts down and sets the scratch14 handoff bit the Booter Unload gate needs. Release attempts the RPC once before quiescing when a boot ran; on-demand testing is available through the debugfs file gsp-phys-unload-rpc while the module owns the GPU. GSP-RM processor suspend is polled on the GSP mailbox.
|
| |
|
|
|
|
|
|
| |
Stage 3d stages the GSP-RM boot from host sysmem (FMC, radix3 over the GSP-RM ELF, signature, message queues, libos LOGINIT/LOGRM/RMARGS and GSP arguments) and runs Booter Load on SEC2: GSP RISC-V reset, libos mailbox, IMEM/DMEM direct load, BOOTVEC=0, M0==0, FALCON_OS, RISC-V active. Stage 3e links the status queue and polls for GSP-RM events; it now also executes the inline run-sequencer command buffer (event 0x1002) against BAR0 (REG_WRITE/MODIFY/POLL, DELAY, STORE, CORE_* including CORE_RESUME) and then waits for GSP_INIT_DONE 0x1001.
Gated by gsp_phys_boot / gsp_phys_boot_dryrun (default off; the normal load path writes nothing). gsp_phys_fwsec=1 without gsp_phys_boot=1 is refused: a FWSEC-only carve cannot pass the booter-unload handoff gate. Release quiesces the GSP, runs the existing FWSEC-SB/booter-unload teardown and frees all staging.
tools/gen_gsp_bindata.py decodes the public generated archives into the Booter Load image (prod signature patched at 0x8700) and the GSP-RM boot (FMC) image; both are self-checked at build time.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
bind-event hardening)
|
| |
|
|
| |
strict board check)
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Stage 3b allocates the three coherent boot-argument pages and fills the
256-byte WPR metadata from the computed Turing FB layout; no device
registers are written (uncommitted work from the previous session,
committed as-is behind the new gate).
The physical claim unbinds the distribution NVIDIA driver; on this host
that power-gates the dGPU board and the re-bind can leave the GPU
unresponsive and hard-freeze the system (observed twice, 2026-09-30, no
crash record). The claim now refuses unless the new gsp_phys_hazard_ack
module parameter is also set, so a stale command line cannot re-trigger
it. See the hazard note at the top of gsp_phys_gpu.c.
|
| |
|
|
| |
(no device writes)
|
| |
|
|
|
|
|
| |
Logs both falcons' run/halt bits, the RISC-V active bit, WPR2 up/down and
the security-falcon mailboxes when the physical GPU is claimed. Verified
live: GSP and SEC2 halted, RISC-V inactive, WPR2 down (HI=0). This is the
read-only half of the real boot rung; no device state is written.
|
|
|
Rung 1 (ownership): a default-off gsp_phys_gpu module param; on claim the
distribution driver is released from 10de:1ed3, our pci_driver binds it,
BAR0/1/3 are mapped and the falcon state is sampled; release unbinds ours
and rebinds the distribution driver. Verified live: claim reads
BOOT0=0x164000a1 with the falcon halted and mailboxes clear; rmmod rebinds
nvidia and nvidia-smi stays healthy.
Rung 2 (firmware): while the device is owned, gsp_phys_fw (default
nvidia/570.211.01/gsp_tu10x.bin) is fetched with request_firmware, checked
as ELF64 RISC-V, and its sections are logged (.fwimage, .fwversion,
.fwsignature_tu10x). The image is held for the boot rung.
The claim is default-off; the emulation path is unchanged.
|
