| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Host-freeze fix bundle (validated 2/2 supervised cycles):
- power unlock now latches D0/D3cold by default (new gsp_phys_repower,
default 0); releasing the claim can no longer power-gate the board and
hard-freeze the host on resume
- bounded post-rebind readiness gate before dropping the locks; bounded D0
settle/verify before the unbind
- READY means a live GSP-RM session: the async worker and the module-owned
join only expose READY when init-done is seen and no unload was sent;
otherwise the claim is released fail-open
- FWSEC reads DMEM0/IMEM back before STARTCPU and fails fast when the
staging is not visible
- the claim harness leaves the board latched by default and takes
--restore-power to opt back into the old restore
Guest-wiring:
- P2: generation-keyed fn65 static-config snapshot cache plus a default-off
identity overlay (new gsp_phys_static_live) for name/short-name/VBIOS;
the probe cycle runs once per backend generation at READY
- P3: default-off read-only RM_CONTROL forwarding whitelist (new
gsp_phys_ctrl_forward) with emulated-handle translation to the adopted
server handles and full emulation fallback
- P5 wave 1: default-off shadow execution of guest CE pushes on the ladder
channel (new gsp_phys_work_forward) via a dedicated ordered work item;
the ladder stage-4 submission is refactored into a shared bounded helper
and the software release path stays authoritative
Live: module-owned boot to init-done, guest smoke ALL OK 64/64 with P2/P3
enabled, 514 shadow copies observed on the physical CE; all cycles released
cleanly with WPR2 down and no reboot.
|
| |
|
|
|
|
|
|
| |
Stage 3d stages the GSP-RM boot from host sysmem (FMC, radix3 over the GSP-RM ELF, signature, message queues, libos LOGINIT/LOGRM/RMARGS and GSP arguments) and runs Booter Load on SEC2: GSP RISC-V reset, libos mailbox, IMEM/DMEM direct load, BOOTVEC=0, M0==0, FALCON_OS, RISC-V active. Stage 3e links the status queue and polls for GSP-RM events; it now also executes the inline run-sequencer command buffer (event 0x1002) against BAR0 (REG_WRITE/MODIFY/POLL, DELAY, STORE, CORE_* including CORE_RESUME) and then waits for GSP_INIT_DONE 0x1001.
Gated by gsp_phys_boot / gsp_phys_boot_dryrun (default off; the normal load path writes nothing). gsp_phys_fwsec=1 without gsp_phys_boot=1 is refused: a FWSEC-only carve cannot pass the booter-unload handoff gate. Release quiesces the GSP, runs the existing FWSEC-SB/booter-unload teardown and frees all staging.
tools/gen_gsp_bindata.py decodes the public generated archives into the Booter Load image (prod signature patched at 0x8700) and the GSP-RM boot (FMC) image; both are self-checked at build time.
|
