| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Host-freeze fix bundle (validated 2/2 supervised cycles):
- power unlock now latches D0/D3cold by default (new gsp_phys_repower,
default 0); releasing the claim can no longer power-gate the board and
hard-freeze the host on resume
- bounded post-rebind readiness gate before dropping the locks; bounded D0
settle/verify before the unbind
- READY means a live GSP-RM session: the async worker and the module-owned
join only expose READY when init-done is seen and no unload was sent;
otherwise the claim is released fail-open
- FWSEC reads DMEM0/IMEM back before STARTCPU and fails fast when the
staging is not visible
- the claim harness leaves the board latched by default and takes
--restore-power to opt back into the old restore
Guest-wiring:
- P2: generation-keyed fn65 static-config snapshot cache plus a default-off
identity overlay (new gsp_phys_static_live) for name/short-name/VBIOS;
the probe cycle runs once per backend generation at READY
- P3: default-off read-only RM_CONTROL forwarding whitelist (new
gsp_phys_ctrl_forward) with emulated-handle translation to the adopted
server handles and full emulation fallback
- P5 wave 1: default-off shadow execution of guest CE pushes on the ladder
channel (new gsp_phys_work_forward) via a dedicated ordered work item;
the ladder stage-4 submission is refactored into a shared bounded helper
and the software release path stays authoritative
Live: module-owned boot to init-done, guest smoke ALL OK 64/64 with P2/P3
enabled, 514 shadow copies observed on the physical CE; all cycles released
cleanly with WPR2 down and no reboot.
|
| | |
|
| |
|
|
| |
static-config-handle ladder path
|
| |
|
|
| |
allocation and a first real copy
|
| |
|
|
|
|
| |
Applies the adversarial review fixes for the command-queue TX and unload RPC: the unload RPC is gated on GSP-RM init-done, debugfs fops pin the module, REG_POLL timeouts use microseconds, the host status readPtr is published, TX free space is checked, swap flags and barriers are corrected, and the legacy payload fallback is opt-in.
Generalizes the transport to multi-element records and a reply-matching status-queue reader, and adds a debugfs probe that round-trips GET_GSP_STATIC_INFO (with a SET_GUEST_SYSTEM_INFO fallback), decodes the server configuration, and a read-only state snapshot file. All gated by gsp_phys_boot; the normal load path is unchanged.
|
| |
|
|
| |
Adds a minimal msgq producer on the command queue (element layout, checksum, sequence, dma_wmb before writePtr, doorbell) and submits the UNLOADING_GUEST_DRIVER RPC so GSP-RM shuts down and sets the scratch14 handoff bit the Booter Unload gate needs. Release attempts the RPC once before quiescing when a boot ran; on-demand testing is available through the debugfs file gsp-phys-unload-rpc while the module owns the GPU. GSP-RM processor suspend is polled on the GSP mailbox.
|
|
|
Stage 3d stages the GSP-RM boot from host sysmem (FMC, radix3 over the GSP-RM ELF, signature, message queues, libos LOGINIT/LOGRM/RMARGS and GSP arguments) and runs Booter Load on SEC2: GSP RISC-V reset, libos mailbox, IMEM/DMEM direct load, BOOTVEC=0, M0==0, FALCON_OS, RISC-V active. Stage 3e links the status queue and polls for GSP-RM events; it now also executes the inline run-sequencer command buffer (event 0x1002) against BAR0 (REG_WRITE/MODIFY/POLL, DELAY, STORE, CORE_* including CORE_RESUME) and then waits for GSP_INIT_DONE 0x1001.
Gated by gsp_phys_boot / gsp_phys_boot_dryrun (default off; the normal load path writes nothing). gsp_phys_fwsec=1 without gsp_phys_boot=1 is refused: a FWSEC-only carve cannot pass the booter-unload handoff gate. Release quiesces the GSP, runs the existing FWSEC-SB/booter-unload teardown and frees all staging.
tools/gen_gsp_bindata.py decodes the public generated archives into the Booter Load image (prod signature patched at 0x8700) and the GSP-RM boot (FMC) image; both are self-checked at build time.
|
