| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Append RMDevidCheckIgnore=1 (dword) to the pre-boot SET_REGISTRY
profile, after the 35 host default parameters and RmDisableDisplay=1.
The key is the registry escape for the static-config devid/board check
that currently fails GSP-RM init; every existing entry is unchanged.
Regenerated kernel/gsp_phys_registry_img.h with the same canonical
packing (values inline, names-only blob): size 1377, numEntries 37,
rpc.length 1409, one 4 KB element. The module code is unchanged apart
from comments: the submission and the prepared log line read the size
and entry count from the generated blob/macros.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GSP-RM init
The pre-boot SET_REGISTRY (function 73) submitted an empty
PACKED_REGISTRY_TABLE. Replace it with the default registry profile the
host driver sends before boot: the 35 default dword parameters from its
parameter table plus RmDisableDisplay=1. The display key makes the GSP-RM
display-presence check treat display as absent, so the display engine is
removed during pre-init instead of being brought up on a headless boot.
The payload is generated into kernel/gsp_phys_registry_img.h as a
PACKED_REGISTRY_TABLE blob (8-byte header, 36 16-byte dword entries,
NUL-terminated names after the array; values inline; no value bytes in
the name blob, matching the reference packer): size 1342, numEntries 36,
rpc.length 1374, one 4 KB element. fn72 is unchanged.
The payload length is not 8-byte aligned (record 1390 -> 1392); the TX
producer already zero-pads the kvzalloc'd staging record and folds the
XOR checksum over the padded length, exactly like the reference producer
zero-pads before _checkSum32, so no producer change is needed. The blob
is static const data: no heap, no new stack frame, and a submit failure
still aborts the boot. The prepared log line now prints the payload size
and entry count.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The real-GSP boot path staged the message queue but never queued the two
fire-and-forget init RPCs the production client places in it before the
booter starts. GSP-RM therefore created its GPU object without any system
information and aborted RM init (live GSP_INIT_DONE rpc_result=0x59), with
the resource-manager's object-database lookups asserting from the first
journal record.
Submit function 72 (GSP_SET_SYSTEM_INFO, 928-byte v17_00 payload carrying
the BAR physical bases, domain/bus/slot, PCI IDs, the BAR0 config-mirror
offset, link/FLR capabilities and upstream-port flags read from the
pci_dev) and function 73 (SET_REGISTRY, header-only empty table, which the
server explicitly accepts) through the existing submit-only queue producer
after all stage-3d preconditions and before the GSP falcon reset/Booter
Load kick. The wire layouts are re-declared in the module with per-field
static asserts against the reference ABI; payloads are heap-allocated, so
no new stack frames are introduced.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
A zero REG_POLL timeout dword is the reference's GPU_TIMEOUT_DEFAULT
sentinel: the reference substitutes the platform default (microseconds;
4 s in graphics mode, the default platform) before waiting. The executor
clamped zero to the 1 us floor, i.e. one jiffy, so a poll that was not
already satisfied failed the boot in 1 ms.
The live 0x1002 sequencer element contains exactly one REG_POLL with
timeout=0 (addr 0x110040); substitute the 4 s graphics-mode default and
then keep the existing 1 us .. 10 s clamp.
|
| |
|
|
|
|
|
|
|
| |
The live 0x1002 element carries bufferSizeDWord=0x3FE2 (16354) - the size
of GSP-RM's own command buffer, not the message. The executor's 0x1000
sanity cap refused it, so the sequencer was never run and GSP_INIT_DONE
was never observed. The reference imposes no upper bound (only nonzero and
greater than cmdIndex); raise the cap to a sanity ceiling and document
that the real execution bound is cmdIndex against the element payload.
|
| |
|
|
|
|
| |
Applies the adversarial review fixes for the command-queue TX and unload RPC: the unload RPC is gated on GSP-RM init-done, debugfs fops pin the module, REG_POLL timeouts use microseconds, the host status readPtr is published, TX free space is checked, swap flags and barriers are corrected, and the legacy payload fallback is opt-in.
Generalizes the transport to multi-element records and a reply-matching status-queue reader, and adds a debugfs probe that round-trips GET_GSP_STATIC_INFO (with a SET_GUEST_SYSTEM_INFO fallback), decodes the server configuration, and a read-only state snapshot file. All gated by gsp_phys_boot; the normal load path is unchanged.
|
| |
|
|
| |
Adds a minimal msgq producer on the command queue (element layout, checksum, sequence, dma_wmb before writePtr, doorbell) and submits the UNLOADING_GUEST_DRIVER RPC so GSP-RM shuts down and sets the scratch14 handoff bit the Booter Unload gate needs. Release attempts the RPC once before quiescing when a boot ran; on-demand testing is available through the debugfs file gsp-phys-unload-rpc while the module owns the GPU. GSP-RM processor suspend is polled on the GSP mailbox.
|
|
|
Stage 3d stages the GSP-RM boot from host sysmem (FMC, radix3 over the GSP-RM ELF, signature, message queues, libos LOGINIT/LOGRM/RMARGS and GSP arguments) and runs Booter Load on SEC2: GSP RISC-V reset, libos mailbox, IMEM/DMEM direct load, BOOTVEC=0, M0==0, FALCON_OS, RISC-V active. Stage 3e links the status queue and polls for GSP-RM events; it now also executes the inline run-sequencer command buffer (event 0x1002) against BAR0 (REG_WRITE/MODIFY/POLL, DELAY, STORE, CORE_* including CORE_RESUME) and then waits for GSP_INIT_DONE 0x1001.
Gated by gsp_phys_boot / gsp_phys_boot_dryrun (default off; the normal load path writes nothing). gsp_phys_fwsec=1 without gsp_phys_boot=1 is refused: a FWSEC-only carve cannot pass the booter-unload handoff gate. Release quiesces the GSP, runs the existing FWSEC-SB/booter-unload teardown and frees all staging.
tools/gen_gsp_bindata.py decodes the public generated archives into the Booter Load image (prod signature patched at 0x8700) and the GSP-RM boot (FMC) image; both are self-checked at build time.
|
