summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* STATE-CURRENT: 09:25 check-back - P6c relay (C0/C1/C3), H1 host GR ladder ↵Arthur Hanson Rasmusson10 days
| | | | wall, green-eye tooling
* gsp-phys: relay verify hardening and counter exposure (default off)Arthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | - the work_relay state line now reports the real backend data-compare verify_fail plus a verify_transient count, distinct from the sema-service hold re-read verify_fail (previously the backend counter was dropped) - a relayed copy whose host-side compare fails is re-read and re-compared once after a short delay; a transient mismatch counts as success and only a persistent mismatch falls back to the software apply as before - the final-mismatch diagnostic now logs the semaphore target/payload/poll time, the first differing byte and 16-byte dumps of live dst, live src and a submit-time analysis material, flagging source mutation vs snapshot/dst - the fault no_event path logs the post reason/return All changes are behind the default-off relay path.
* debug: add green-eye GSP/uproc RISC-V VM runtime analysis toolingArthur Hanson Rasmusson10 days
| | | | | | | | | | Adds open-iov/debug/risc-v-gsp-rm-vm: a GDB-free instrumentation stack that boots uproc/GSP firmware in qemu-system-riscv64 and provides Frida-like hooks, breakpoints, watchpoints, memory dumps, structure decoding, snapshot diffs, recorded sessions, declarative probes, a plugin API and a Ghidra symbol/hit bridge. Verified: 25 tests green (including a live QEMU smoke test); the demo uproc boots with correct hook/leave/watch/schema/snapshot/fault evidence; the optional TCG trace plugin builds and recorded 15M trace lines in 3 s; the TU104 570.144 fwimage probe reports its first exception (load access fault at firmware vaddr 0x4009014 reading 0x2000000000000A00). Documentation: lean tool docs under debug/risc-v-gsp-rm-vm/docs/00-10, a new docs/05-operations/03-risc-v-gsp-rm-vm.md debugging document, and '# TOOL IN DEVELOPMENT - NOT READY YET!' markers in docs/README.md, the onboarding tooling table and the debugging workflows doc. Vendors qemu-plugin.h from QEMU v8.2.2 (GPL-2.0-or-later), with its license header intact, so the optional TCG plugin builds without a QEMU source tree.
* gsp-phys: H1 GR ladder - GR0 channel, compute object, GR sem push (default off)Arthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | | | | | | | | New load-time gsp_phys_rmcall_engine (0=COPY0 default, 1=GR0) parameterizes the physical ladder: TSG and channel engine_type GR0, one-attempt channel alloc, TURING_COMPUTE_A engine object (class 0xc5c0, handle 0xcaf0002c), BIND engineType=1, and a GR method push (SET_OBJECT 0xc5c0 on subchannel 1 plus SET_REPORT_SEMAPHORE) submitted through the existing GPFIFO/USERD doorbell tail, polling the module semaphore. CE work-forwarding refuses cleanly while a GR ladder is active. A debugfs trigger re-runs the GR push. With the parameter at its default the ladder emits byte-identical COPY0 requests (only the state line gains engine=COPY0). Live (first GR context on the live server): every GR RPC accepted - channel variant V5, TURING_COMPUTE_A alloc status=0x0 -> hObject=0xcaf0002c, BIND status=0x0, token=0x1 - and the engine fetched the push (GPGet 0->1), but raised a GR exception instead of executing the release: exceptType=0x20, NOCAT faultingEngine="GR", intr1=0x80000000, no rpc_result errors. The failure is downstream of all RPCs; no mutating retry was made and the device released cleanly (WPR2 down, rebound, 5 locks, pstore empty, same boot). A default-engine control cycle stayed green (REAL COPY OK). Follow-up: bisect the GR alloc params, the release method D word, and the method order/context init using the drained GR fault records as the oracle.
* gsp-phys: P6c C3 - relay forwarded-engine faults to the guest (default off)Arthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | New default-off gsp_phys_fault_relay: when a relayed copy times out, the GSP-RM status queue is drained and the first OS_ERROR_LOG (0x1006) recorded after the submission's doorbell is decoded (NOCAT corroboration), matched against the ladder channel's runlist/chid, and delivered to the guest by writing its channel notifier (info32=exceptType, info16=engine type, status=0xffff) and posting the channel event. A late-release recheck skips delivery if the engine actually completed, one delivery per hold, and the existing software fallback always runs first, so no release or data is lost. - pure decode helpers extracted from the status printers; prints unchanged - status-queue walks serialized with a mutex; unmatched 0x1006 records are no longer silently dropped - fault epoch snapshot at the doorbell prevents stale records from matching - fault counters and faults:/fault_relay: state lines - default-off gsp_phys_fault_inject debug knob forces the next relayed pair's source PTE to zero to produce a real engine fault - pump notifier latch prevents clobbering a delivered fault Live: injection run produced a real CE0 FAULT_PTE (0x1f @0x200000), decoded with errString, chid/runlist matched, notifier delivered, software fallback applied (applied+fallback==engaged), clean release; the guest RM reacted to the delivered fault by tearing down its channels (faithful semantics). Healthy control: faults all zero, relay requested=40 ok=40, smoke matched=64/64, clean release. Caveat: the auxiliary event post failed (no_event=1, no MSI-X) and the guest teardown means fault injection is not smoke-compatible; the parameter stays off.
* gsp-phys: P6c C0+C1 - engine-authored guest CE semaphore (default off)Arthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New default-off gsp_phys_relay: for a forwarded guest CE copy whose push ends in a one-word release, the release page is resolved at forward time, mapped on a fresh scratch line, and the real engine writes the payload directly into the guest-visible semaphore page; the deferred-release hold then verifies that page and skips only that record's software apply. Any failure (unresolvable target, refused kind, pool exhaustion, poll timeout, data mismatch, channel teardown) falls back to applying every release in software, so a release is never lost or duplicated. - new exported gsp_phys_backend_guest_ce_copy_ex() + relay counters; gsp_phys_backend_guest_ce_copy() behavior unchanged (wrapper) - new work_relay: counters line in gsp-phys-state - relay limited to CE channels and one-word absolute releases; counter and reduction releases stay on the existing paths Live: param-off regression matched the wave-2 baseline exactly (req=101 ok=101 verify_ok=101, copy_skipped=119, smoke matched=64/64, relay zeros). With the parameter on: requested=68 ok=67 skipped_sw=67, verify_fail=0, resolve_fail=0, timeouts=0, smoke 64/64, and the engine-authored guest semaphore was observed directly (sem=0x00000003 / 0x0000007e at the guest page). One copy in 68 released its semaphore but failed the host-side data compare; it fell back to the software apply (fallback accounting applied+fallback==engaged) with the smoke green - residual to triage, which is why the parameter stays default-off. A forced-unresolvable run (requested=103, fallback=105, no relay submissions) kept the smoke green. Every cycle: 5 power-domain locks held, driver rebound, WPR2 down, no rail cycles, pstore empty, same boot.
* gsp-phys: P6a debug triggers resolve the guest page HPA at trigger timeArthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | | | | | | | Triggers 6 (W2G) and 7 (G2H) previously used page-table slots pre-built once during the ladder's stage 3. A guest page's host physical address can change between translations (observed 0x13a591000 -> 0x3b8318000 for the same GPA), and a runtime PTE rewrite into an already-fetched 128-byte line is invisible (no invalidate path), so the later write-direction trigger validated against the wrong page and failed its data check. Both triggers now translate at trigger time and run through the same fresh-scratch-line path as forwarding, via a shared internal copy body; the exported forwarding API is unchanged and still requires gsp_phys_work_forward. A changed HPA is now an informational once-per-boot note rather than a failure; the probe-pattern guard still refuses stale pages. Trigger 8 and the stage-3 pre-built slots are unchanged. Live (run p6w3): GUEST G2H COPY OK gpa=0x12423d000 hpa=0x56ab3a000; GUEST W2G COPY OK with verify_ok=1; PTE selftest OK; guest SEEN_W2G; ladder REAL COPY OK; clean latched release (5 power-domain locks, rebound, WPR2 down, no rail cycles, pstore empty, same boot). The full smoke run hit the known guest cuInit/WPR2-already-up wedge at cdt; the trigger path itself is green.
* gsp-phys: P6b waves 1.5 and 2 - deferred release and hardware-authored guest ↵Arthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | | | | | | | | | copies - new default-off gsp_phys_work_defer_release: a forwarded guest push's releases are recorded and its GPFIFO entry is held (no consume, no GP_GET write, no counter publish/stall) until the work item publishes completion; the service thread then delivers the releases, with a fallback on failure/timeout (500 ms cap enforced every pump pass)/ pause/quiesce/channel-delete - new default-off gsp_phys_work_hw_primary: the software copy is skipped for forwarded ops, so the physical engine authors the data; a once-only software copy runs before the releases on any hardware failure or when the request cannot be queued - release-apply helpers extracted; exactly-once latches; channel-delete and teardown handling; counters and a work_guard state line - live: deferred-release run engaged=75 applied=75 timeouts=0 with the full smoke green; hardware-primary run req=100 ok=100 verify_ok=100 fallback=0 copy_skipped=119 copy_fail=0, smoke ALL OK 64/64 (guest read data the engine authored), with 19 fail-closed inline software fallbacks under single-inflight contention; a range-unregistered run proved the fallback (121 skipped copies, all recovered, smoke green) - defaults off; the software path and all existing guards unchanged
* gsp-phys: P6b wave 1 - shadow-forward guest CE copies to the physical engineArthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | | | | - the sema service captures the first eligible copy per push from the software resolver's own operands (the real push shape mixes guest RAM with emulated-VRAM shadow addresses, including physical destinations) - HPA resolution: guest RAM through the shared guest-RAM file page cache, emulated VRAM through the mapping of its kernel shadow - new scratch page-table pool: 16 zeroed page-table pages with their page-directory entries built before any engine access, handing out one whole 128-byte GMMU PTE fetch line per copy pair (16 PTEs, 512 pairs per boot, never reused; a PTE written into an already-fetched line is not observed and there is no invalidate path) - the backend submits the copy on the module-owned channel and verifies the result host-side; every miss falls back to the ladder shadow copy, and the software pump remains authoritative - live (full smoke, both parameters on): req=42 ok=42 verify_ok=42 verify_fail=0 fallback=0, guest payload roundtrip ALL OK 64/64, clean latched release; defaults stay off
* gsp-phys: P6a - real copy engine reads/writes guest RAM pagesArthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | | | | - file-backed guest RAM (launcher memory-backend-file share=on) and in-kernel GPA->HPA translation through the shared file page cache (read_cache_page + page_to_phys + pfn_valid), opened O_LARGEFILE; new default-off gsp_phys_guest_mem parameter - debugfs gsp-phys-guest-ram (path + gpa/off/size ranges) and gsp-phys-guest-gpa (one pinned GPA per boot); rm-call triggers 6/7 run host->guest and guest->host 4 KiB CE copies; trigger 8 is a PTE self-test through a fresh slot - guest page-table slots are pre-built during ladder stage 3: runtime PTE writes into an already-walked page-table line are not observed without a TLB invalidate - guest RAM layout (q35 4.2, 4 GiB): below-4G GPA == file offset, above-4G offset = GPA - 0x80000000 (2 GiB PCI hole) - tests: tools/test/gpage_test.c guest probe; docs + STATE-CURRENT record the live green (G2H/W2G with semaphore release, guest observed the write, smoke ALL OK 64/64, clean latched release)
* docs: add complete SBOM, ignore local deployment resources, remove stale ↵Arthur Hanson Rasmusson10 days
| | | | third-party references
* gitignore updateArthur Hanson Rasmusson10 days
|
* STATE-CURRENT + docs: record P2 identity overlay, P3 control forwarding and ↵Arthur Hanson Rasmusson10 days
| | | | P5 wave-1 shadow execution
* STATE-CURRENT + docs: record the freeze fix and the P2/P3 guest-wiring landingsArthur Hanson Rasmusson10 days
| | | | | | | | - STATE-CURRENT snapshot moves to the P3 frontier: the host-freeze latch and readiness gates are validated, the static identity overlay and the read-only control forwarding are landed and live-verified - the physical-backend guest-wiring design is now marked P0-P3 implemented with the P2/P3 acceptance results
* gsp-phys: freeze-safe release, boot-proof READY, and guest-wiring P2/P3/P5-wave1Arthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Host-freeze fix bundle (validated 2/2 supervised cycles): - power unlock now latches D0/D3cold by default (new gsp_phys_repower, default 0); releasing the claim can no longer power-gate the board and hard-freeze the host on resume - bounded post-rebind readiness gate before dropping the locks; bounded D0 settle/verify before the unbind - READY means a live GSP-RM session: the async worker and the module-owned join only expose READY when init-done is seen and no unload was sent; otherwise the claim is released fail-open - FWSEC reads DMEM0/IMEM back before STARTCPU and fails fast when the staging is not visible - the claim harness leaves the board latched by default and takes --restore-power to opt back into the old restore Guest-wiring: - P2: generation-keyed fn65 static-config snapshot cache plus a default-off identity overlay (new gsp_phys_static_live) for name/short-name/VBIOS; the probe cycle runs once per backend generation at READY - P3: default-off read-only RM_CONTROL forwarding whitelist (new gsp_phys_ctrl_forward) with emulated-handle translation to the adopted server handles and full emulation fallback - P5 wave 1: default-off shadow execution of guest CE pushes on the ladder channel (new gsp_phys_work_forward) via a dedicated ordered work item; the ladder stage-4 submission is refactored into a shared bounded helper and the software release path stays authoritative Live: module-owned boot to init-done, guest smoke ALL OK 64/64 with P2/P3 enabled, 514 shadow copies observed on the physical CE; all cycles released cleanly with WPR2 down and no reboot.
* STATE-CURRENT: 01:25 check-back - G0 freeze fix validated 2/2; P2 guest ↵Arthur Hanson Rasmusson10 days
| | | | identity overlay live (GREEN); LIVE=0 control did not pass
* docs: gate post-1.0 host acceleration as do-not-implementArthur Hanson Rasmusson10 days
| | | | | | | | | | Clarify in the post-1.0 record and the public status page that host-native acceleration / host display is a stretch goal we are only considering: do not block on it, pursue it, or design around it. It is never reached automatically, requires an explicit human decision after all baseline goals are complete (and only once there is no known risk), and may be scrapped on architectural grounds. No aspect of the baseline software may be designed toward it. No baseline design or code changes.
* docs: defer experimental host acceleration to post-1.0; record rationaleArthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | | The host-VF design is reverted. Independent adversarial, soundness and VM-support reviews falsified its load-bearing mechanisms: RAM-backed BARs cannot be ioremapped or claimed by the stock driver on x86_64 or aarch64; trap-free windows cannot observe edge-triggered writes or read side effects; multi-client GSP-RM is unproven; the MSI and bridge bring-up plans were incorrect; and the isolation and performance claims were overstated for the mechanism. Replace it with one self-contained post-1.0 document recording the findings, corrected candidate approaches and trade-offs, a minimal-risk future architecture, the compile-time + module-load experimental gating policy, a phased plan with abort gates, and the revisit criteria. No baseline design or code path is changed; all earlier doc edits are reverted.
* STATE-CURRENT: 23:12 check-back - guest-wiring P1 lifecycle landed and ↵Arthur Hanson Rasmusson10 days
| | | | exercised (fail-open); async boot FWSEC failure and a release-path freeze recurrence noted
* gsp-phys: mdev-owned backend lifecycle (P1)Arthur Hanson Rasmusson10 days
| | | | | | | | | | | | | | | | Add the gsp_phys_mdev_owned ownership selector (default 0: unchanged load-time module-owned claim/boot). With 1, module load claims nothing; the first mdev create starts a refcounted backend session whose claim+boot runs asynchronously from a work item, so mdev create and init_work never block. The last mdev remove releases after the emulation thread is stopped. Failures are fail-open: the backend stays OFF and the mdev keeps serving the emulation path. nv_vgpu_exit now gates the session STOPPING under the session lock, drains the emulation threads via mdev_unregister_driver(), and only then releases the claim; the module-owned path keeps its previous release position. A start while STOPPING is refused and a concurrent second stopper cannot release twice. No forwarding is added.
* docs: record host VF acceleration as a deferred future goalArthur Hanson Rasmusson10 days
|
* STATE-CURRENT: 22:12 check-back - guest-wiring rung opened (inert session ↵Arthur Hanson Rasmusson10 days
| | | | API skeleton); PLAN A baseline re-verified 64/64
* gsp-phys: backend session API skeleton (P0, inert)Arthur Hanson Rasmusson10 days
|
* STATE-CURRENT + docs: first real copy executed by the physical CE; add the ↵Arthur Hanson Rasmusson11 days
| | | | | | | | | | | | | | physical-backend guest-wiring design - STATE-CURRENT snapshot 2026-10-01 21:05: the host RM-client ladder now allocates VAS+PDB+TSG+channel and executes a real 4 KiB VA-mode CE copy (semaphore released, dst==src) on the physical engine; next is wiring the live session into the guest-facing mdev/vfio path. - docs/03-architecture/11-physical-backend-guest-wiring.md: phased design (P0-P6) for bridging the physical backend into the guest-facing emulation, with the seam table, lifecycle changes and static-config flow. - docs/README.md: reading order updated for the new document; execution status refreshed.
* gsp-phys: encode the GPFIFO GET field correctly so the pushbuffer fetch uses ↵Arthur Hanson Rasmusson11 days
| | | | the mapped VA
* gsp-phys: drain and decode the status queue on a failed CE submissionArthur Hanson Rasmusson11 days
| | | | | | | | | | | | | | | | After a doorbell the GSP-RM status ring accumulated unconsumed records that nothing drained: the host readPtr stayed behind the writePtr and the engine's error text was never decoded. Add a bounded drain (max 64 records) using the existing validated ring walk: each record is logged with its function/status/seqNum, function 0x1006 (OS_ERROR_LOG) is decoded into exceptType/runlistId/chid/prevXid/errString, and function 0x1020 (GSP_POST_NOCAT_RECORD) into recType/errorCode/subsystem/ bugcheck/faultingEngine plus a bounded printable view of the diagnostic buffer. The host read pointer advances per consumed record (the normal consumer side), so the ring keeps free space. Stage 4's poll-timeout path drains before returning -ETIMEDOUT, and a new read-only debugfs file gsp-phys-status-drain triggers one bounded drain per read. No locks are taken and no device register is written.
* gsp-phys: submit the CE copy in virtual mode through the mapped VA windowArthur Hanson Rasmusson11 days
| | | | | | | | | | SET_SEMAPHORE_A/B always take a GPU VA and the channel is USER, so the release cannot target a raw DMA address and physical-mode src/dst is not permitted. Map the src/dst/semem pages at VA 0x102000/0x103000/0x104000 (small-PT slots 258/259/260) in the existing channel PDB, push the semaphore VA, drop the SET_SRC/DST_PHYS_MODE pairs and clear LAUNCH_DMA bits 12/13 (0x18d: Pipelined|Flush|Release-one-word|Pitch). The block is now 13 method pairs / 26 dwords; GPFIFO/PUT/doorbell/poll/memcmp are unchanged.
* gsp-phys: keep the channel USERD in host-writable sysmem for the ladderArthur Hanson Rasmusson11 days
| | | | | | | | | | | | Revert the USERD selection to the client sysmem chunk unconditionally: the ladder advances GP_PUT by writing that chunk directly, and there is no BAR1/PRAMIN aperture here to reach an FBMEM page, so an FBMEM USERD would leave the host write invisible to the hardware USERD the engine polls. Remove the now-dead FBMEM USERD allocator, handle and state; the FBMEM error-notifier allocation path is unchanged. The PDB hierarchy, VA-based gpFifoOffset and ring-entry GET, TSG schedule insurance, logs and asserts from the PDB change are kept. Logs now say userd=sysmem (host-writable) so the path in use is unambiguous.
* gsp-phys: build the channel page directory and submit the CE copy through ↵Arthur Hanson Rasmusson11 days
| | | | | | | | | | | | GPU VAs Fill the external VAS root's GP10X v2 hierarchy (root/PD2/PD1/PD0-small/PT) around a 2 MB VA window so the PDBMA/CE can fetch the GPFIFO and pushbuffer by GPU VA; gpFifoOffset and the GPFIFO ring entry GET now carry those VAs. Allocate the USERD page in FBMEM (class 0x40, matching the reference default) with the sysmem chunk as fallback, and add the advisory TSG-level GPFIFO_SCHEDULE 0xa06c0101 after the channel BIND/schedule. Log the window, table DMAs and entries, and expose them in the debugfs state snapshot.
* STATE-CURRENT: 20:12 check-back - first real GPFIFO work submitted to the ↵Arthur Hanson Rasmusson11 days
| | | | physical engine; channel now allocates; engine did not execute the block
* gsp-phys: allocate the FBMEM notifier with the RM client heap owner; make ↵Arthur Hanson Rasmusson11 days
| | | | | | | | | | | | | | | | | the notif index advisory The class-0x40 NV_MEMORY_ALLOCATION_PARAMS reached the server with owner=0, which the class constructor rejects with NV_ERR_INVALID_OWNER (0x39). Set owner=HEAP_OWNER_RM_CLIENT_GENERIC (0xDEAF000C) and internalflags= NVOS32_ALLOC_INTERNAL_FLAGS_SKIP_SCRUB (0x4), matching the reference notifier allocation. Add static_asserts pinning owner/attr/size/offset/hVASpace/ internalflags to the reference 128-byte ABI so a layout drift breaks the build. SET_WORK_SUBMIT_TOKEN_NOTIF_INDEX (0xc36f010a, index 3) now logs an advisory warning on failure (no error-context object exists, so the server returns NV_ERR_OBJECT_NOT_FOUND 0x57) and the stage continues to GET_WORK_SUBMIT_TOKEN: the server writes the work-submit token before the notifier update, so the token is independent of the notifier object.
* gsp-phys: FBMEM error notifier and the bind/notif-index/token order before ↵Arthur Hanson Rasmusson11 days
| | | | submission
* gsp-phys: use the 4-entry GP10X root format for the VAS page directoryArthur Hanson Rasmusson11 days
| | | | | | | | | The TU104 GMMU root level has 2 index bits (4 PDEs of 2^47 bytes each), so the server's vaLimitNew = (numEntries << 47) - 1 must stay within its vaLimitMax = 2^49-1; numEntries=256 computed 2^55-1 and drew NV_ERR_INVALID_ARGUMENT (0x1f). Send 4 entries (32 bytes of the 4 KB page-aligned VASPDB chunk) and log the value on failure. The aperture/flags word is unchanged (0x0a, SYSMEM_NONCOH + ALL_CHANNELS).
* STATE-CURRENT: 19:12 check-back - host RM client allocates a VAS on the live ↵Arthur Hanson Rasmusson11 days
| | | | GSP-RM; wall moved to the address-space page-directory setup; clean release
* gsp-phys: allocate an externally-owned VAS with a page directory before the ↵Arthur Hanson Rasmusson11 days
| | | | channel ladder (V5)
* STATE-CURRENT: 18:47 check-back - first RM objects on the live GSP-RM; ↵Arthur Hanson Rasmusson11 days
| | | | channel allocation blocked; unsafe variant removed after fail-safe reboot
* gsp-phys: remove the GSP-owned channel variant that wedges the RM taskArthur Hanson Rasmusson11 days
|
* gsp-phys: channel-alloc variant matrix (device parent, skip-scrubber, ↵Arthur Hanson Rasmusson11 days
| | | | gsp-owned, server-allocated memdescs)
* gsp-phys: allocate the channel group under the device handle (valid parent) ↵Arthur Hanson Rasmusson11 days
| | | | and decode rm-call statuses
* gsp-phys: rm-call diagnostics (failed-reply payload, RM log dump) and the ↵Arthur Hanson Rasmusson11 days
| | | | static-config-handle ladder path
* gsp-phys: add the host RM-client ladder (gsp-phys-rm-call) for real object ↵Arthur Hanson Rasmusson11 days
| | | | allocation and a first real copy
* STATE-CURRENT: 16:47 check-back - ladder row updated for the GSP-RM init ↵Arthur Hanson Rasmusson11 days
| | | | milestone (log-ring and identity fixes)
* STATE-CURRENT: physical GSP-RM completes initialization and serves the ↵Arthur Hanson Rasmusson11 days
| | | | static-config RPC
* gsp-phys: register the RM log ring correctly, send raw config-space ↵Arthur Hanson Rasmusson11 days
| | | | | | | | | | | | | | | | | | | identity, and request the full static-config payload The RM log-ring init argument carried a malformed libos id (LOGM), so the server never mapped the ring and its early failure path was invisible. The pre-boot system-info payload carried unpacked 16-bit identity fields; the server expects the raw config-space dwords (device<<16|vendor), so its GPU device-id read back as zero and the static-config device-name lookup returned NOT_SUPPORTED. The static-config RPC must be sized to the full reply payload, and the guest-system-info RPC is sent first, matching the reference order. Live result: GSP-RM completes initialization (init-done rpc_result=0), serves the 1656-byte static config (name, FB size, handles, PDE bases), and shuts down cleanly through the unload RPC.
* guest-diag: treat the benign TX-header status line as non-fatal in the claim ↵Arthur Hanson Rasmusson11 days
| | | | harness
* STATE-CURRENT: 15:47 check-back - source campaign closes host-side inputs; ↵Arthur Hanson Rasmusson11 days
| | | | PMU-provisioned chip identity is the one hard dependency
* STATE-CURRENT: cycles 4-10 - pre-boot RPCs/registry/timer/chipset landed; RM ↵Arthur Hanson Rasmusson11 days
| | | | init wall narrowed to static-config collection
* gsp-phys: populate the chipset/CL block of the pre-boot system infoArthur Hanson Rasmusson11 days
| | | | | | | | | | | | | | | | | | | | | | Fill the GspSystemInfo chipset fields the production client syncs before the GSP boot instead of leaving them zero: - clPdbProperties (bitmask in the client's clSyncWithGsp order): bit 0 (config space accessible, from the OS MCFG/ECAM availability), bit 7 and bit 21 (Intel Skylake-family upstream-port setup: ASPM POR list, root-port nosnoop WAR), bit 13 (upstream port ASPM L1 capable), bit 27 (LTR supported+enabled up to the root port) and bit 32 (IO coherent). PDB_PROP_CL_UNSUPPORTED_CHIPSET is never assigned by the client, so the faithful unmatched-chipset value is 0. - Chipset = 0 (CS_UNKNOWN) for a host bridge with no chipsetInfo[] entry, the reference's no-match fallback. - FHBBusInfo/chipsetIDInfo: 10-byte BUSINFO blobs of the first host bridge of the GPU's domain (device, vendor, subdevice, subvendor, revision), with the subsystem-capability fallback on chipsetIDInfo. acpiMethodData is intentionally sent all-zero (bValid=0): no ACPI/AML calls are made and every consumer tolerates the no-data encoding. All device lookups use refcounted pci_get_device()/pci_dev_put().
* gsp-phys: drop RmDisableDisplay from the registry profile (display-enabled ↵Arthur Hanson Rasmusson11 days
| | | | | | | | | | | | | | | | experiment) The working distribution driver runs with display enabled; the RmDisableDisplay=1 deviation changes board/display state and may be implicated in the devid/board validation failure blocking GSP-RM init. Regenerate the profile without it: the 35 host default parameters plus RMDevidCheckIgnore=1, 36 entries total, display brought up as a stock boot would. Same canonical packing: size 1344, numEntries 36, rpc.length 1376, record 1392 (8-byte aligned), one 4 KB element. The module is unchanged apart from comments and the prepared log line, which now reports 'host default profile + RMDevidCheckIgnore=1, display enabled'.
* STATE-CURRENT: physical GSP-RM init root-caused to devid validation; cycle 8 ↵Arthur Hanson Rasmusson11 days
| | | | under test
generated by cgit v1.2.3 (git 2.39.1) at 2026-10-12 13:42:25 +0000