diff options
| author | Arthur Hanson Rasmusson <arthur@vgpu.io> | 2026-09-13 18:36:21 -0400 |
|---|---|---|
| committer | Arthur Hanson Rasmusson <arthur@vgpu.io> | 2026-09-13 18:36:21 -0400 |
| commit | 00e54c13c7c9030c4d5f7151467f2d85a3730e29 (patch) | |
| tree | 17a45239df8d2e4912ff3697ed06e85a10b969de /userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073specific.h | |
| download | open-iov-00e54c13c7c9030c4d5f7151467f2d85a3730e29.tar.gz open-iov-00e54c13c7c9030c4d5f7151467f2d85a3730e29.zip | |
Initial commit: Open-IOV vGPU-IO complete stack
- Firmware decompilation: GSP 570.144W (28.5MB ELF, RV64IMAC), 132 decompiled C files
- Kernel modules: nvidia.ko (34MB, OpenRM), open-iov-vfio.ko (2.8MB, VFIO mdev), gsp-vgpu.ko (1.8MB, guest driver)
- Userspace: libiov.so/libvgpu.so (76KB), example_vgpu (28KB), rpc_emulator.c
- PCI config space emulation (256B with PM, MSI, MSI-X, PCIe caps)
- 12 RPC types fully mapped from firmware decompilation
- BAR trap, WPR, scheduling, notification, migration emulation
- Helper scripts: load_vgpu_stack, create_mdev, launch_qemu_vgpu, test_vgpu_stack, setup_guest_driver, unload_vgpu_stack
- Architecture documentation
- Wiki: 10 technical documents
- Git LFS for large binaries (.ko, .bin, .iso, .img, .o, ghidra repos)
- nvidia-open-gpu-kernel-modules as submodule
Diffstat (limited to 'userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073specific.h')
| -rw-r--r-- | userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073specific.h | 3184 |
1 files changed, 3184 insertions, 0 deletions
diff --git a/userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073specific.h b/userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073specific.h new file mode 100644 index 0000000..12420b9 --- /dev/null +++ b/userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073specific.h @@ -0,0 +1,3184 @@ +/* + * SPDX-FileCopyrightText: Copyright (c) 1993-2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved. + * SPDX-License-Identifier: MIT + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#pragma once + +#include <nvtypes.h> + +// +// This file was generated with FINN, an NVIDIA coding tool. +// Source file: ctrl/ctrl0073/ctrl0073specific.finn +// + +#include "ctrl/ctrl0073/ctrl0073base.h" + +#include "ctrl/ctrlxxxx.h" +/* NV04_DISPLAY_COMMON display-specific control commands and parameters */ + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_TYPE + * + * This command can be used to determine the associated display type for + * the specified displayId. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the ID of the display for which the display + * type is to be returned. Only one display may be indicated in this + * parameter. + * displayType + * This parameter returns the display type associated with the specified + * displayId parameter. Valid displayType values are: + * NV0073_CTRL_SPECIFIC_DISPLAY_TYPE_CRT + * NV0073_CTRL_SPECIFIC_DISPLAY_TYPE_DFP + * NV0073_CTRL_SPECIFIC_DISPLAY_TYPE_TV + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_TYPE (0x730240U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_TYPE_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_TYPE_PARAMS_MESSAGE_ID (0x40U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_TYPE_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 displayType; +} NV0073_CTRL_SPECIFIC_GET_TYPE_PARAMS; + +/* valid display types */ +#define NV0073_CTRL_SPECIFIC_DISPLAY_TYPE_UNKNOWN (0x00000000U) +#define NV0073_CTRL_SPECIFIC_DISPLAY_TYPE_CRT (0x00000001U) +#define NV0073_CTRL_SPECIFIC_DISPLAY_TYPE_DFP (0x00000002U) +#define NV0073_CTRL_SPECIFIC_DISPLAY_TYPE_TV (0x00000003U) + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_EDID_V2 + * + * This command can be used to request the EDID for the specified displayId. + * + * [in] subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the total + * number of subdevices within the parent device. This parameter should + * be set to zero for default behavior. + * [in] displayId + * This parameter specifies the display to read the EDID. The display ID + * must specify a display with a positive connect state as determined + * with the NV0073_CTRL_CMD_SYSTEM_GET_CONNECT_STATE command. Only one + * display may be indicated in this parameter. If a more than one + * display Id is used, the RM will return NV_ERR_INVALID_ARGUMENT. + * [out] bufferSize + * This parameter returns the number of bytes copied into edidBuffer after + * performing the requested EDID operations. + * [out] edidBuffer + * The array of EDIDs that RM will fill after the requested operations. If + * the size of the array is not large enough to hold the number of bytes to + * be copied, NV_ERR_INVALID_ARGUMENT will be returned. + * [in] flags + * This parameter defines the specific operations that will be performed + * in reading the EDID. + * Here are the current defined fields: + * NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_COPY_CACHE + * A client uses this field to indicate whether to return the cached + * copy of the EDID or to use DDC to read the EDID from the display. + * Possible values are: + * NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_COPY_CACHE_NO + * The RM will use DDC to grab the EDID. + * NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_COPY_CACHE_YES + * The RM will copy the last EDID found into the clients + * buffer. No DDC will be performed. + * NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_READ_MODE + * A client uses this field to indicate whether to read from + * the HW and return the EDID w/o any patching + * Possible values are: + * NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_READ_MODE_COOKED + * Use the _COPY_CACHE policy + * NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_READ_MODE_RAW + * Perform the read and return an unadulterated EDID. + * NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_DISPMUX_READ_MODE + * A client uses this field to indicate whether to read EDID + * from SBIOS using ACPI sub function for display dynamic switching + * feature. This flag should only be set on internal display with + * dynamic switching feature enabled. + * Possible values are: + * NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_DISPMUX_READ_MODE_ACPI + * RM reads the EDID from SBIOS and returns the raw EDID provided + * by SBIOS. + * NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_DISPMUX_READ_MODE_DEFAULT + * EDID is read based on rest of the 'flags' that are passed to + * this function. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_EDID_V2 (0x730245U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_EDID_V2_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_EDID_MAX_EDID_BYTES 2048U + +#define NV0073_CTRL_SPECIFIC_GET_EDID_V2_PARAMS_MESSAGE_ID (0x45U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_EDID_V2_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 bufferSize; + NvU32 flags; + NvU8 edidBuffer[NV0073_CTRL_SPECIFIC_GET_EDID_MAX_EDID_BYTES]; +} NV0073_CTRL_SPECIFIC_GET_EDID_V2_PARAMS; + +#define NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_COPY_CACHE 0:0 +#define NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_COPY_CACHE_NO 0x00000000U +#define NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_COPY_CACHE_YES 0x00000001U + +#define NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_READ_MODE 1:1 +#define NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_READ_MODE_COOKED 0x00000000U +#define NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_READ_MODE_RAW 0x00000001U + +#define NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_DISPMUX_READ_MODE 3:2 +#define NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_DISPMUX_READ_MODE_DEFAULT 0x00000000U +#define NV0073_CTRL_SPECIFIC_GET_EDID_FLAGS_DISPMUX_READ_MODE_ACPI 0x00000001U + +/* + * NV0073_CTRL_CMD_SPECIFIC_SET_EDID_V2 + * + * This command can be used to set or remove a complete EDID for the + * specified displayId. Once the EDID is set, any requests + * to read the EDID or use DDC detection will always use a cached copy of + * the EDID. That is, the EDID becomes static until disabled by calling + * this same function with edidBuffer. Note, that DDC based + * detection will always pass for any displayId that has set an EDID. Also, + * this path will not store any value across reboots. If an EDID needs to + * remain set after a reboot, RM clients must call this function again. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the total + * number of subdevices within the parent device. This parameter should + * be set to zero for default behavior. + * displayId + * This parameter specifies the display to store or the EDID. Only one + * display may be indicated in this parameter. If more than one displayId + * is used, the RM will return NV_ERR_INVALID_ARGUMENT. + * If the displayId does not use DDC and hence would not have an EDID, + * then the RM could also return NV_ERR_INVALID_ARGUMENT. + * bufferSize + * This parameter specifies the size of the EDID buffer pointed to by + * pEdidBuffer. If the EDID write contains more bytes than bufferSize, + * the RM will extend the bufferSize of the EDID inside the RM to match. + * Note a bufferSize of 0 would mean no bytes will be copied, but set the + * current cached EDID as static. + * edidBuffer + * This parameter specifies the EDID buffer that the RM will copy into + * the RM buffer. If the EDID buffer is empty, the RM will remove any + * previous set EDID and allow further detection and EDID reads to use DDC. + * The RM will not check to see if the EDID is valid here or not. + * The client should validate the EDID if needed before calling this function. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * + */ + +#define NV0073_CTRL_CMD_SPECIFIC_SET_EDID_V2 (0x730246U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_EDID_V2_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_EDID_V2_PARAMS_MESSAGE_ID (0x46U) + +typedef struct NV0073_CTRL_SPECIFIC_SET_EDID_V2_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 bufferSize; + NvU8 edidBuffer[NV0073_CTRL_SPECIFIC_GET_EDID_MAX_EDID_BYTES]; +} NV0073_CTRL_SPECIFIC_SET_EDID_V2_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_FAKE_DEVICE + * + * This Control Cmd is for providing the Faking device(s) support from RM. + * This command serves as the entry point for all interaction of RM with + * user mode component of the any internal [test] tool. The Faking framework + * in RM will be activated only after the usermode app sends in a proper ENABLE + * cmd first. Any attempt to issue other cmds while the faking code has not + * been enabled will result in RM err _INVALID_DATA. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the total + * number of subdevices within the parent device. This parameter should + * be set to zero for default behavior. + * cmd + * This field will carry the command to be executed by the framework. + * This includes Enabling/Disabling the test framework and faking devices + * like CRT/DVI/TV. + * data + * This field is to carry the data required for executing the cmd. + * Except for Enable and Disable, the other faking device commands will + * require the device mask of the device to be faked/removed. + * tvType + * This field specifies a specific TV type while faking a TV. + * Possible values are: + * NV0073_FAKE_DEVICE_TV_NONE + * NV0073_FAKE_DEVICE_TV_SVIDEO + * NV0073_FAKE_DEVICE_TV_COMPOSITE + * NV0073_FAKE_DEVICE_TV_COMPONENT + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_DATA + * + */ + +#define NV0073_CTRL_CMD_SPECIFIC_FAKE_DEVICE (0x730243U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_CMD_SPECIFIC_FAKE_DEVICE_PARAMS_MESSAGE_ID" */ + +/* valid fake device TV connector types */ +#define NV0073_FAKE_DEVICE_TV_NONE (0U) +#define NV0073_FAKE_DEVICE_TV_SVIDEO (1U) +#define NV0073_FAKE_DEVICE_TV_COMPOSITE (2U) +#define NV0073_FAKE_DEVICE_TV_COMPONENT (3U) + +#define NV0073_CTRL_CMD_SPECIFIC_FAKE_DEVICE_PARAMS_MESSAGE_ID (0x43U) + +typedef struct NV0073_CTRL_CMD_SPECIFIC_FAKE_DEVICE_PARAMS { + NvU32 subDeviceInstance; + NvU32 cmd; + NvU32 data; + NvU32 tvType; +} NV0073_CTRL_CMD_SPECIFIC_FAKE_DEVICE_PARAMS; + +/* Faking Support commands */ +/* some random value to enable/disable test code */ +#define NV0073_FAKE_DEVICE_SUPPORT_ENABLE 0x11faU +#define NV0073_FAKE_DEVICE_SUPPORT_DISABLE 0x99ceU +#define NV0073_FAKE_DEVICE_SUPPORT_ATTACH_DEVICES 0x100U +#define NV0073_FAKE_DEVICE_SUPPORT_REMOVE_DEVICES 0x101U + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_I2C_PORTID + * + * This command returns the I2C portID for the specified display device. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the display for which information is to be + * returned. Only one display may be indicated in this parameter. + * If more than one displayId is used a failing status of + * NV_ERR_INVALID_ARGUMENT will be returned. + * commPortId + * This parameter returns the I2C communication port ID of the + * display device indicated by the displayId parameter. + * ddcPortId + * This parameter returns the I2C DDC port ID of the display device + * indicated by the displayId parameter. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ + +#define NV0073_CTRL_CMD_SPECIFIC_GET_I2C_PORTID (0x730211U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_I2C_PORTID_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_I2C_PORTID_PARAMS_MESSAGE_ID (0x11U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_I2C_PORTID_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 commPortId; + NvU32 ddcPortId; +} NV0073_CTRL_SPECIFIC_GET_I2C_PORTID_PARAMS; + +#define NV0073_CTRL_SPECIFIC_I2C_PORT_NONE (0x0U) + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_CONNECTOR_DATA + * + * This command can be used to get display connector data. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the display for which information is to be + * returned. Only one display may be indicated in this parameter. + * If more than one displayId is used a failing status of + * NV_ERR_INVALID_ARGUMENT will be returned. + * DDCPartners + * This parameter specifies an NV0073_DISPLAY_MASK value describing + * the set of displays that share the same DDC line as displayId. This + * parameter will always be returned even if we also return the + * NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_FLAGS_PRESENT_NO flag. + * flags + * This parameter specifies optional flags to be used while retrieving + * the connector data for a given displayId. + * Legal values for this parameter include: + * NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_FLAGS_PRESENT + * This flag describes whether the connector data is present + * inside the firmware. + * count + * This parameter returns the number of connectors associated with + * the displayId argument. This value indicates the number of +* valid entries returned in the data parameter. + * data + * This parameter returns an array of structures containing the connector + * data associated with each connector for the given displayId argument. + * The count field specifies how many entries in this array are returned. + * Each entry in the array contains the following members: + * index + * This value is the index associated with the given connector. If + * two displayIds share the same index, then they share the same + * connector. + * type + * This value defines the type of connector associated with the + * displayId argument. + * location + * This value provides a possible means to determine the relative + * location of the connector in association to other connectors. + * For desktop boards, a value of zero defines the south most + * connector (the connector closest to the bus slot into which + * the board is inserted). + * platform + * This value defines the type of system with which to associate the + * location of each connector. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * + */ + +#define NV0073_CTRL_CMD_SPECIFIC_GET_CONNECTOR_DATA (0x730250U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_CONNECTOR_DATA_PARAMS_MESSAGE_ID" */ + +/* maximum number of connectors */ +#define NV0073_CTRL_MAX_CONNECTORS 4U + +#define NV0073_CTRL_SPECIFIC_GET_CONNECTOR_DATA_PARAMS_MESSAGE_ID (0x50U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_CONNECTOR_DATA_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 flags; + NvU32 DDCPartners; + NvU32 count; + struct { + NvU32 index; + NvU32 type; + NvU32 location; + } data[NV0073_CTRL_MAX_CONNECTORS]; + NvU32 platform; +} NV0073_CTRL_SPECIFIC_GET_CONNECTOR_DATA_PARAMS; + +/* defines for the flags field */ +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_FLAGS_PRESENT 0:0 +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_FLAGS_PRESENT_NO 0x00000000U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_FLAGS_PRESENT_YES 0x00000001U + +/* defines for the data[].type field */ +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_VGA_15_PIN 0x00000000U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_TV_COMPOSITE 0x00000010U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_TV_SVIDEO 0x00000011U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_TV_HDTV_COMPONENT 0x00000013U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_TV_SCART 0x00000014U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_TV_COMPOSITE_SCART_OVER_EIAJ4120_BLUE 0x00000016U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_TV_HDTV_EIAJ4120 0x00000017U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_PC_POD_HDTV_YPRPB 0x00000018U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_PC_POD_SVIDEO 0x00000019U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_PC_POD_COMPOSITE 0x0000001AU +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_DVI_I_TV_SVIDEO 0x00000020U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_DVI_I_TV_COMPOSITE 0x00000021U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_DVI_I 0x00000030U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_DVI_D 0x00000031U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_ADC 0x00000032U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_LFH_DVI_I_1 0x00000038U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_LFH_DVI_I_2 0x00000039U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_SPWG 0x00000040U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_OEM 0x00000041U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_DP_EXT 0x00000046U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_DP_INT 0x00000047U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_DP_MINI_EXT 0x00000048U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_DP_SERIALIZER 0x00000049U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_HDMI_A 0x00000061U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_HDMI_C_MINI 0x00000063U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_LFH_DP_1 0x00000064U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_LFH_DP_2 0x00000065U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_VIRTUAL_WFD 0x00000070U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_USB_C 0x00000071U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_DSI 0x00000072U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_STEREO_3PIN_DIN 0x00000073U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_USB_C_UHBR 0x00000074U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_DATA_TYPE_UNKNOWN 0xFFFFFFFFU + +/* defines for the platform field */ +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_DEFAULT_ADD_IN_CARD 0x00000000U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_TWO_PLATE_ADD_IN_CARD 0x00000001U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_CONFIGURABLE 0x00000002U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_DESKTOP_FULL_DP 0x00000007U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_MOBILE_ADD_IN_CARD 0x00000008U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_MXM 0x00000009U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_MOBILE_BACK 0x00000010U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_MOBILE_BACK_LEFT 0x00000011U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_MOBILE_BACK_DOCK 0x00000018U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_CRUSH_DEFAULT 0x00000020U +#define NV0073_CTRL_SPECIFIC_CONNECTOR_PLATFORM_UNKNOWN 0xFFFFFFFFU + +/* + * NV0073_CTRL_CMD_SYSTEM_GET_HDCP_REPEATER_INFO + * + * This command is used to get HDCP repeater information. From the + * repeater device this call returns KsvList,BStatus and VPrime. If the + * device is implemented internally, the client call supply a Cksv and Cn + * And in turn following parameters are returned: MPrime, Dksv which are used + * for upstream authentication. In addition to this the flag bAuthRequired + * shall be set to indicate that upstream authentication is required along with + * comparing the KsvList with SRM. On the other hand, if the device is an + * external implementation MPrime and Dksv values shall be ignored and the flag + * bAuthRequired will not be set indicating upstream authentication not + * required and just the comparison of KsvList with upstream SRM is required. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter indicates the digital display device's + * displayId. This comes as input to this command. + * bRepeaterPending + * The repeater pending flag as the output to this command. + * The flag returned indicating whether repeater is ready or not + * TRUE if repeater is not ready and FALSE otherwise. + * Cn + * This parameter is the input value Cn a 64 bit random number + * to be provided to this command. Cn value is Upstream protocol's + * exchange random number.This value must be written by software + * before the KSV is written if the transmitter device follows the HDCP + * upstream protocol. If the transmitter supports a proprietary method of + * authenticating the repeater device, Cn can be ignored. + * Cksv + * This parameter is the input value Cksv (a unique identifier) of 40 bit + * size to be provided to this command. This input value shall contain 20 + * ones and 20 zeros in accordance with the HDCP specification. This value + * must be written by software before the KSV is written if the transmitter + * device follows the HDCP upstream protocol. If the transmitter supports + * a proprietary method of authenticating the repeater device, Cksv can be + * ignored. + * actualKsvSize + * The actual KSV list size(in bytes) returned back as output while reading + * KSV list. + * ksvList + * In case downstream device is repeater then this will give the list of + * KSV's of all downstream devices attached to the repeater. It differs + * from actualKsvSize because this allocates maximum allowed size. + * If downstream device is receiver then this array will contain all zeros. + * BStatus + * The BSTATUS value as output by this command.This value's bit fields + * contains information returned by repeater device such as total number of + * downstream devices attached to the repeater excluding HDCP repeater, + * value for the depth indicating number of connection levels through + * connection topology, this value also gives information about maximum + * cascaded and devices exceeded (127). + * VPrime + * The VPRIME value returned as output by this command from the repeater + * device. This value should be used to compare the verification value + * during the HDCP upstream protocol using SHA1 in accordance with the + * upstream protocol. This value can be ignored if bAuthRequired is not + * set indicating the verification is done by the transmitter device. + * bAuthrequired + * The authentication flag as the output to this command. + * The Flag returned indicating whether authentication is required or not + * TRUE if authentication required and FALSE otherwise. + * MPrime + * The MPRIME value returned as output by this command. + * MPrime shall be decrypted by the client and used in the SHA-1 + * computation of V during upstream authentication. This value can be + * ignored if bAuthRequired is not set indicating the verification is + * done by the transmitter device. + * Dksv + * This parameter is the output value DKSV of 40 bit size. + * As per the HDCP specification this value should contain 20 ones and + * 20 zeros.This value can be ignored if bAuthRequired is not set + * indicating the verification is done by the transmitter device. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_REP_KSV_SIZE (5U) +#define NV0073_CTRL_DKSV_SIZE (5U) +#define NV0073_CTRL_MPRIME_SIZE (0x2U) /* finn: Evaluated from "(8 / 4)" */ +#define NV0073_CTRL_CN_SIZE (0x2U) /* finn: Evaluated from "(8 / 4)" */ +#define NV0073_CTRL_CKSV_SIZE (5U) +#define NV0073_CTRL_VPRIME_SIZE (0x5U) /* finn: Evaluated from "(20 / 4)" */ + +#define NV0073_CTRL_MAX_HDCP_REPEATER_COUNT (0x27bU) /* finn: Evaluated from "(NV0073_CTRL_REP_KSV_SIZE * 127)" */ + +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDCP_REPEATER_INFO (0x730260U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_HDCP_REPEATER_INFO_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_HDCP_REPEATER_INFO_PARAMS_MESSAGE_ID (0x60U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_HDCP_REPEATER_INFO_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU8 bRepeaterPending; + NvU32 Cn[NV0073_CTRL_CN_SIZE]; + NvU8 Cksv[NV0073_CTRL_CKSV_SIZE]; + NvU32 actualKsvSize; + NvU8 ksvList[NV0073_CTRL_MAX_HDCP_REPEATER_COUNT]; + NvU16 BStatus; + NvU32 VPrime[NV0073_CTRL_VPRIME_SIZE]; + NvU8 bAuthrequired; + NvU32 MPrime[NV0073_CTRL_MPRIME_SIZE]; + NvU8 Dksv[NV0073_CTRL_DKSV_SIZE]; +} NV0073_CTRL_SPECIFIC_GET_HDCP_REPEATER_INFO_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_ENABLE + * + * This command is used to signal the resource manager that the upcoming mode + * shall be hdmi vs dvi. This is required since the resource manager + * does not read the display edid. The resource manager shall enable hdmi + * components such as turning on the audio engine for instance. This should + * be called prior to every modeset in which the displayId is capable of hdmi. + * displayId + * This parameter specifies the displayId of HDMI resource to configure. + * This comes as input to this command. + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which operation should be directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * enable + * This field specifies the legal values: + * NV0073_CTRL_SPECIFIC_SET_HDMI_ENABLE_TRUE + * NV0073_CTRL_SPECIFIC_SET_HDMI_ENABLE_FALSE + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_ENABLE (0x730273U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_HDMI_ENABLE_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_HDMI_ENABLE_PARAMS_MESSAGE_ID (0x73U) + +typedef struct NV0073_CTRL_SPECIFIC_SET_HDMI_ENABLE_PARAMS { + NvU8 subDeviceInstance; + NvU32 displayId; + NvU8 enable; +} NV0073_CTRL_SPECIFIC_SET_HDMI_ENABLE_PARAMS; + +#define NV0073_CTRL_SPECIFIC_SET_HDMI_ENABLE_FALSE (0x00000000U) +#define NV0073_CTRL_SPECIFIC_SET_HDMI_ENABLE_TRUE (0x00000001U) + +/* + * NV0073_CTRL_CMD_SPECIFIC_CTRL_HDMI + * + * This command can be used to enable HDMI communication on the associated GPU. + * This should be called prior to every modeset in which the displayId is capable of HDMI. + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which operation should be directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * displayId + * This parameter specifies the displayId of HDMI resource to configure. + * This comes as input to this command. + * enable + * This field specifies the legal values: + * NV0073_CTRL_SPECIFIC_CTRL_HDMI_DISABLE + * NV0073_CTRL_SPECIFIC_CTRL_HDMI_ENABLE + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_CTRL_HDMI (0x730274U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_CTRL_HDMI_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_CTRL_HDMI_PARAMS_MESSAGE_ID (0x74U) + +typedef struct NV0073_CTRL_SPECIFIC_CTRL_HDMI_PARAMS { + NvU8 subDeviceInstance; + NvU32 displayId; + NvBool bEnable; +} NV0073_CTRL_SPECIFIC_CTRL_HDMI_PARAMS; + +#define NV0073_CTRL_SPECIFIC_CTRL_HDMI_DISABLE (0x00000000U) +#define NV0073_CTRL_SPECIFIC_CTRL_HDMI_ENABLE (0x00000001U) + +/* + * NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM + * + * This command is used to signal the resource manager that the audio stream + * is to be mute off or on. + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which operation should be directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * displayId + * This parameter specifies the displayId of HDMI resource to configure. + * This comes as input to this command. + * mute + * This field specifies the legal values: + * NV0073_CTRL_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM_TRUE + * NV0073_CTRL_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM_FALSE + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + */ +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM (0x730275U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM_PARAMS_MESSAGE_ID (0x75U) + +typedef struct NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM_PARAMS { + NvU8 subDeviceInstance; + NvU32 displayId; + NvU8 mute; +} NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM_PARAMS; + +#define NV0073_CTRL_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM_FALSE (0x00000000U) +#define NV0073_CTRL_SPECIFIC_SET_HDMI_AUDIO_MUTESTREAM_TRUE (0x00000001U) + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_HDCP_STATE + * + * This command is used to obtain that state of hdcp for the specified attach + * point (that being the displayId). + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the display for which information is to be + * returned. Only one display may be indicated in this parameter. + * If more than one displayId is used a failing status of + * NV_ERR_INVALID_ARGUMENT will be returned. + * flags + * This parameter specifies the state of the attach point resource. + * Here are the current defined fields: + * NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING + * This comes as an output to this command. The attach point + * is currently encrypting hdcp content over the attach point + * link. This state of this field is determined by + * NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_CACHED. The + * default is to return cached hdcp state. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_CACHED + * This comes as an input to this command. If set to 1, the return + * value in NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING is based + * on the Status Word. If the uncached hdcp state fails, + * such as the case for external hdcp designs that do not support + * Upstream Status register, then if the flag + * NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_CACHED is set, RM + * will unclear it and return the cached value instead. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_CAPABLE + * This comes as an output to this command. + * This bit indicates that the attach point resource is capable + * of hdcp encryption. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_DUAL_LINK_CAPABLE + * This comes as an output to this command. + * This bit indicates that the attach point resource is capable + * of hdcp encryption in a dual-link configuration. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_DISALLOWED + * This bit indicates that the attach point resource should not + * have HDCP available even if capable. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_RECEIVER_CAPABLE + * This comes as an output to this command. + * This bit indicates that the receiver attached to this attach point + * resource is capable of hdcp encryption. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_REPEATER_CAPABLE + * This comes as an output to this command. + * This bit indicates that the receiver attached to this attach point + * resource is capable of hdcp repeater operation. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_FP_INTERNAL + * This comes as output to this command. + * This bit indicates that the associated display is an HDCP-capable + * internal panel. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_RECEIVER_CAPABLE + * This comes as output to this command. + * This bit indicates that the receiver attached to this attach point + * resource is capable of hdcp22 encryption. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_REPEATER_CAPABLE + * This comes as output to this command. + * This bit indicates that the receiver attached to this attach point + * resource is capable of hdcp22 repeater operation. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_ENCRYPTING + * This comes as an output to this command. The attach point + * is currently encrypting hdcp22 content over the attach point + * link. This state of this field is determined by + * NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_CACHED, return hdcp22 uncached + * status by default. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_TYPE1 + * This comes as an output to this command. The attach point + * is currently encrypting hdcp22 content with stream Type 1 over the + * link. This state of this field is determined by + * NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_CACHED, return hdcp22 uncached + * status of stream type by default. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_AUTHENTICATED + * This comes an output to this command. + * This bit indicates if the receiver attached to this attach point + * completes authenticaion with source or not. To non DP-MST receiver, the state + * should be identical to NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_ENCRYPTING, while + * DP MST needs to assign ECF after authenticated. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_HDCP22_CAPABLE + * This comes as an output to this command. + * This bit indicates that the attach point resource is capable + * of hdcp2.2 encryption. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ + +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDCP_STATE (0x730280U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_HDCP_STATE_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_HDCP_STATE_PARAMS_MESSAGE_ID (0x80U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_HDCP_STATE_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 flags; +} NV0073_CTRL_SPECIFIC_GET_HDCP_STATE_PARAMS; + +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING 0:0 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_CACHED 1:1 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_CACHED_TRUE (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_ENCRYPTING_CACHED_FALSE (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_ENCRYPTION_INPROGRESS 2:2 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_ENCRYPTION_INPROGRESS_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_ENCRYPTION_INPROGRESS_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_CAPABLE 4:4 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_CAPABLE_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_CAPABLE_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_DUAL_LINK_CAPABLE 5:5 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_DUAL_LINK_CAPABLE_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_DUAL_LINK_CAPABLE_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_DISALLOWED 6:6 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_DISALLOWED_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_DISALLOWED_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_RECEIVER_CAPABLE 8:8 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_RECEIVER_CAPABLE_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_RECEIVER_CAPABLE_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_REPEATER_CAPABLE 9:9 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_REPEATER_CAPABLE_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_REPEATER_CAPABLE_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_FP_INTERNAL 10:10 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_FP_INTERNAL_FALSE (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_FP_INTERNAL_TRUE (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_RECEIVER_CAPABLE 11:11 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_RECEIVER_CAPABLE_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_RECEIVER_CAPABLE_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_REPEATER_CAPABLE 12:12 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_REPEATER_CAPABLE_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_REPEATER_CAPABLE_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_ENCRYPTING 13:13 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_ENCRYPTING_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_ENCRYPTING_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_TYPE1 14:14 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_TYPE1_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_HDCP22_TYPE1_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AUTHENTICATED 15:15 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AUTHENTICATED_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AUTHENTICATED_YES (0x00000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_HDCP22_CAPABLE 16:16 +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_HDCP22_CAPABLE_NO (0x00000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_STATE_AP_HDCP22_CAPABLE_YES (0x00000001U) + +/* + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_INFO + * + * This structure describes stStatus information. + * + * displayId + * This parameter returns the displayId associated with the + * attach point index. + * S + * Each element contains the attach-point S. This value's bit + * field contains information pertaining to STATUS of each attach point. + * The stStatus parameter is broken down as follows: + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_ENCRYPTING + * This field specifies that the attach-point is transmitting and + * has output encryption enabled. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_REPEATER + * This field specifies that the attach-point is transmitting to a + * repeater device. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_USER_ACCESSIBLE + * This field specifies that the attach-point is transmitting on a + * user-accessible external digital port. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_EXTERNALLY_UNPROTECTED + * This field specifies that the attach-point is transmitting + * externally and is unprotected. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_ATTACH_PORT_INDEX + * This field specifies the port/attach-point index. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_NUM_PORTS + * This field specifies the number of connectable attach-ports. + * The default is 8. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_INTERNAL_PANEL + * This field specifies a compliant internal/non-user accessible + * port panel without hdcp encryption. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_WIDE_SCOPE + * This field specifies _CS is not enough to determine the presence + * of non-compliant outputs (this field is always 1). + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_CS_CAPABLE + * This field specifies that connection-state is supported. + * This field is always 1. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_READZ_CAPABLE + * This field specifies that readZ is supported. + * This field is always 0. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_DUAL_LINK_EVEN + * This field specifies the even half of a dual-link (0x74). + * This field *NOT* yet supported. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_DUAL_LINK_ODD + * This field specifies the odd half of a dual-link (0x76) + * This field *NOT* yet supported. + */ +typedef struct NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_INFO { + NvU32 displayId; + NV_DECLARE_ALIGNED(NvU64 S, 8); +} NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_INFO; + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_ENCRYPTING 0:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_REPEATER 1:1 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_USER_ACCESSIBLE 2:2 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_EXTERNALLY_UNPROTECTED 3:3 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_ATTACH_PORT_INDEX 7:4 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_NUM_PORTS 11:8 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_INTERNAL_PANEL 12:12 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_WIDE_SCOPE 13:13 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_CS_CAPABLE 14:14 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_READZ_CAPABLE 15:15 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_RESERVED0 39:16 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_DUAL_LINK_EVEN 40:40 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_S_DUAL_LINK_ODD 41:41 + + +/* + * NV0073_CTRL_CMD_SPECIFIC_HDCP_CTRL + * + * This command is used to do HDCP controls on the specified attach + * point (that being the displayId). + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the display for which information is to be + * returned. Only one display may be indicated in this parameter. + * If more than one displayId is used a failing status of + * NV_ERR_INVALID_ARGUMENT will be returned. + * err + * This parameter specifies provides info regarding the outcome + * of this calling control call. If zero, no errors were found. + * Otherwise, this parameter will specify the error detected. + * The valid parameter is broken down as follows: + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_UNSUCCESSFUL + * If set to _YES, this indicates at least one of the calling + * functions failed. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_PENDING + * If set to _YES, this indicates at renogiation is not complete and + * that the client should check status later. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_BAD_TOKEN_TYPE + * If set to _YES, the session ID or KSV was rejected. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_LINK_FAILED + * If set to _YES, renogiation could not complete. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_INVALID_PARAMETER + * If set to _YES, one or more of the calling parameters was invalid. + * cmd + * This parameter specifies a bitmask of the legal defined fields. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_NULL + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_RENEGOTIATE + * This command forces the specified displayId to renegotiate the + * hdcp link. The client should supply as an input, + * cN and cKsv. On return, bStatus, stStatus and cS is returned. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_DISABLE_AUTHENTICATION + * This command forces the specified displayId to off authentication the + * hdcp link. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_READ_LINK_STATUS + * This command reads the status of the cipher returning a signed + * S (ie: kP) and cS for the requested displayId, as well as + * the relevant parameters necessary for the client to verify + * the information provided. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_VALIDATE_LINK + * This command returns the parameters necessary to validiate the + * links for the displayId. The client should supply as input + * cN and cKsv. On return, bStatus, cS, stStatus, aN, numBksvs, + * bKsvList, vP, mP, and dKsv are returned. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_QUERY_HEAD_CONFIG + * This command enumerates ports attached to a head. + * On input, Cn and cKsv should be provided and on return + * bSTatus, status, and connection state is returned. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_ABORT_AUTHENTICATION + * This command causes the specified AP to abort authentication + * protocol after KSV list is read, or during next time it's + * renegotiated. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_GET_ALL_FLAGS + * This command provides all possible valid device data. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_GET_SPECIFIED_FLAGS + * This command provides data specified by flags field set by the + * client. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_FORWARD_PENDING_KSVLIST_READY + * This command provides client to tell there's pending Hdcp1X KsvList + * Ready notification at BStatus read. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_READ_LINK_STATUS_NO_DISPLAY + * This command reads the status of the cipher returning a signed + * S (ie: kP) and cS and the relevant parameters necessary for the client to + * verify upstream. + * flags + * This parameter specifies a bitmask of the legal defined fields and the + * reason AbortAuthentication. + * The client shall set the desired fields and on return if valid, + * the resource manager will set which flags are actually valid. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BCAPS_PRESENT + * IN: Request hdcp receiver bcaps register state. + * OUT: Bcaps parameter contains valid receiver bcaps register data. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BSTATUS_PRESENT + * IN: Request hdcp receiver bstatus register state. + * OUT: BStatus parameter contains valid receiver bstatus register data + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_PRESENT + * IN: Request hdcp receiver key selection vector: BKSV + * Driver will read BKSV from receiver and update RM states if + * the cmd is _GET_SPECIFIED_FLAGS and _KP_PRESENT is unset. + * Otherwise, driver returns cached BKSV. + * OUT: Bksv parameter contains valid receiver bksv data. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_LIST_PRESENT + * IN: Request list of downstream BKSV from repeater + * OUT: BksvList parameter contains valid data. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_DKSV_PRESENT + * IN: Request hdcp transmitter key selection vector: DKSV + * OUT: Dksv parameter contains valid receiver DKSV data. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AN_PRESENT + * IN: Request hdcp parameter An + * OUT: An parameter contains valid data + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AKSV_PRESENT + * IN: Request hdcp transmitter downstream key selection vector: AKSV + * OUT: Aksv parameter contains valid receiver Aksv data. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_VP_PRESENT + * IN: Request VPrime data + * OUT: VPrime parameter contains valid data + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_MP_PRESENT + * IN: Request MPrime data used for repeater authentication + * OUT: MPrime parameter contains valid data + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_KP_PRESENT + * IN: Request SPrime data + * OUT: SPrime parameter contains valid data + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_IMPLICIT_HEAD + * IN: The head to use if no legal head could be located. + * Use NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_IMPLICIT_HEAD_NONE + * if no implicit head should be used. + * OUT: n/a + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_FORCE_REAUTH + * IN: Request to execute authentication protocol even encryption + * enabled. + * OUT: n/a + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_RXIDMSG_PENDING + * IN: Request to execute repeater authentication protocol with pending + * ID List message information. + * OUT: n/a + * Reason of AbortAuthentication. + * When pass in by client, it indicates the reason why client issue an + * Abort. When return by RM, it indicates the reason of last successful + * Abort. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_NONE + * Default value + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_UNTRUST + * Abort due to Kp mismatch + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_UNRELBL + * Abort due to repeated link failure + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_KSV_LEN + * Abort due to KSV length + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_KSV_SIG + * Abort due to KSV signature + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_SRM_SIG + * Abort due to SRM signature + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_SRM_REV + * Abort due to SRM revocation + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_NORDY + * Abort due to repeater not ready + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_KSVTOP + * Abort due to KSV topology error + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_BADBKSV + * Abort due to invalid Bksv + * linkCount + * This parameter specifies how many links are valid. This is important + * when determining AKSV, BKSV, AN, etc... and is an output to this + * command. + * apIndex + * Each element of this parameter specifies the hardware attach-point index + * for the requested displayId. The 2nd element is only valid in the case + * where the resource output is capable of dual-link determined when the + * linkCount is greater than 1. + * cN + * This parameter is the input value Cn a 64 bit random number + * to be provided to this command. Cn value is Upstream protocol's + * exchange random number.This value must be written by software + * before the KSV is written if the transmitter device follows the HDCP + * upstream protocol. + * cKsv + * This parameter is the input value Cksv (a unique identifier) of 40 bit + * size to be provided to this command. This input value shall contain 20 + * ones and 20 zeros in accordance with the HDCP specification. This value + * must be written by software before the KSV is written if the transmitter + * device follows the HDCP upstream protocol. + * aN + * Each element of this buffer specifies the output value aN, + * a 64 bit random number used during hdcp authentication and validating + * the upstream link in which case only the first 40 bits are used. + * The 2nd element is only valid in the case where the resource output is + * capable of dual-link determined when the linkCount is greater than 1. + * aKsv + * Each element of this buffer specifies output value aKsv of 40 bit size. + * As per the HDCP specification this value should contain 20 ones and + * 20 zeros. + * The 2nd element is only valid in the case where the resource output is + * capable of dual-link determined when the linkCount is greater than 1. + * bStatus + * Each element contains the attach-point bStatus data returned by the + * repeater/receiver device (if valid). The bStatus value is an output + * by this command. For HDCP on DP, bInfo is the one we should look at. + * bInfo is defined exactly the same with bStatus on DVI. Hal is taking + * care of the difference here. + * This bStatus info is broken down as follows: + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BSTATUS_DEVICE_COUNT + * Specifies the total number of receivers excluding repeater. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BSTATUS_MAX_DEVICES_EXCEEDED + * Specifies a topology error in which greater than 127 devices are + * detected in the overall hdcp configuration. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BSTATUS_REPEATER_DEPTH + * Specifies the repeater depth. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BSTATUS_MAX_CASCADE_EXCEEDED + * Specifies a topology error in which greater than 7 levels are + * detected in the overall hdcp configuration. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDMI_MODE + * Specifies that the hdcp receiver is in HDMI mode. + * bCaps + * The BCAPS value is an output by this command. This value's bit fields + * contains information returned by receiver device. Bcaps can be used + * to determine if receiver is a repeater and when the ksvlist and vprime + * data is ready. + * The BCAPS is defined different in the spec of HDCP on DP. It's been + * split to BCAPS and BSTATUS. Here we'll end a flag to indicate + * the client if it's a DP. + * The bCaps parameter is broken down as follows based on HDCP spec 1.1: + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_FAST_REAUTHENTICATION + * This field when set to 1, specifies the receiver is capable of + * receiving(unencrypted) video signal during session + * re-authentication. All HDMI capable receivers shall be capable of + * performing the fast authentication even if this bit is not set. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_EESS_1_1 + * This field when set to 1, specifies this HDCP receiver supports + * Enhanced Encryption Status Signaling (EESS), Advance cipher, and + * Enhanced Link Verification options. For the HDMI protocol, EESS + * capability is assumed regardless of this bit setting. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_READY_KSV_FIFO + * This field when set to 1, specifies this HDCP repeater has built + * the list of attached KSVs and computed the verification value V'. + * This value is always zero during the computation of V'. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_FAST + * This field when set to 1, specifies this device supports 400khz + * transfers. When zero, 100 khz is the maximum transfer rate + * supported. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_REPEATER + * This field when set to 1, specifies the HDCP receiver supports + * downstream connections as permitted by Digital Content + * Protection LLC licence. This bit does not change while the HDCP + * receiver is active. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_HDMI_RESERVED + * This field is reserved and HDCP receivers not capable of + * support HDMI must clear this bit to 0. + * stStatus + * This parameter specifies the attach point stStatus. See + * the description of NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_INFO for + * details on stStatus information. + * cS + * This parameter provides the connection-state for the status of + * all port/attach-points on this head. + * The connection-state is broken down as follows: + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_ATTACH_POINTS + * This field specifies the transmitting attach-points. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_NON_HDCP + * This field specifies the transmitting attach-points. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_HEAD_INDEX + * This field specifies the index of the head. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_RFUPLANES + * This field specifies the RFUPLANES. + * This field *NOT* yet supported. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_NUM_ACTIVE_HEADS + * This field specifies the number of heads - 1. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_ATTACH_PLANES + * This field specifies attach planes. + * This field *NOT* yet supported. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_ENCRYPTING + * This field is supported on chips with Display IP 0501 and later. + * NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_SPAN_MODE + * This field specifies dual-display span mode. + * This field *NOT* yet supported. + * bKsvList + * In case downstream device is repeater then this will give the list of + * KSV's of all downstream devices attached to the repeater. It differs + * from actualKsvSize because this allocates maximum allowed size. + * If downstream device is receiver then this array will contain all zeros. + * numBksvs + * Total number of Bksv from all downstream devices in the bKsvList. + * This info can also be obtained via bStatus. + * vP + * The VPRIME value returned as output by this command from the repeater + * device. This value should be used to compare the verification value + * during the HDCP upstream protocol using SHA1 in accordance with the + * upstream protocol. This value can be ignored if bAuthRequired is not + * set indicating the verification is done by the transmitter device. + * kP + * The KP value is returned as an output by this command. This + * parameter is the signature computed by hardware and the client + * should compute the signature to compare this value. + * The 2nd element is only valid in the case where the resource output is + * capable of dual-link determined when the linkCount is greater than 1. + * mP + * The MPRIME value returned as output by this command. + * MPrime shall be decrypted by the client and used in the SHA-1 + * computation of V during upstream authentication. This value can be + * ignored if bAuthRequired is not set indicating the verification is + * done by the transmitter device. + * dKsv + * Each element of this buffer is the output value DKSV of 40 bit size. + * As per the HDCP specification this value should contain 20 ones and + * 20 zeros. + * The 2nd element is only valid in the case where the resource output is + * capable of dual-link determined when the linkCount is greater than 1. + * streamIndex + * Each content stream is assigned an index value bye upstream client. + * HDMI: The index must be 0. + * DP SST: The index must be 0. + * DP MST: Assigned stream index. + * streamType + * Each content stream is assigned a type value by the upstream content + * control function. + * 0x00: Type 0 content stream. May be transimtted by the HDCP repeater to + * all HDCP devices. + * 0x01: Type 1 content stream. Must not be transmitted by the HDCP + * repeater to HDCP 1.x-compliant devices and HDCP 2.0-compliant + * repeaters. + * 0x02-0xFF: reserved for futures use only. + * bEnforceType0Hdcp1xDS + * If this bit is set, DPU enforces Type0 if it finds Hdcp1x monitor downstream + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ + +#define NV0073_CTRL_CMD_SPECIFIC_HDCP_CTRL (0x730282U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_HDCP_CTRL_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_HDCP_LINK_COUNT (0x0000002U) +#define NV0073_CTRL_HDCP_VPRIME_SIZE (0x0000014U) +#define NV0073_CTRL_HDCP_MAX_DEVICE_COUNT (0x00000FFU) +#define NV0073_CTRL_HDCP_KSV_SIZE (0x0000005U) +#define NV0073_CTRL_HDCP_MAX_NUM_APS (0x0000010U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_PARAMS_MESSAGE_ID (0x82U) + +typedef struct NV0073_CTRL_SPECIFIC_HDCP_CTRL_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + + NvU32 err; + + NvU32 cmd; + NvU32 flags; + NvU8 linkCount; + + NV_DECLARE_ALIGNED(NvU64 cN, 8); + NV_DECLARE_ALIGNED(NvU64 cKsv, 8); + + NvU32 apIndex[NV0073_CTRL_HDCP_LINK_COUNT]; + + NV_DECLARE_ALIGNED(NvU64 aN[NV0073_CTRL_HDCP_LINK_COUNT], 8); + NV_DECLARE_ALIGNED(NvU64 aKsv[NV0073_CTRL_HDCP_LINK_COUNT], 8); + + NvU32 bStatus[NV0073_CTRL_HDCP_MAX_NUM_APS]; + NvU32 bCaps[NV0073_CTRL_HDCP_MAX_NUM_APS]; + + NV_DECLARE_ALIGNED(NV0073_CTRL_SPECIFIC_HDCP_CTRL_STATUS_INFO stStatus[NV0073_CTRL_HDCP_MAX_NUM_APS], 8); + + NV_DECLARE_ALIGNED(NvU64 cS, 8); + + NV_DECLARE_ALIGNED(NvU64 bKsv[NV0073_CTRL_HDCP_LINK_COUNT], 8); + NV_DECLARE_ALIGNED(NvU64 bKsvList[NV0073_CTRL_HDCP_MAX_DEVICE_COUNT], 8); + NvU32 numBksvs; + + NvU8 vP[NV0073_CTRL_HDCP_VPRIME_SIZE]; + NV_DECLARE_ALIGNED(NvU64 kP[NV0073_CTRL_HDCP_LINK_COUNT], 8); + + NV_DECLARE_ALIGNED(NvU64 mP, 8); + NV_DECLARE_ALIGNED(NvU64 dKsv[NV0073_CTRL_HDCP_LINK_COUNT], 8); + + NvU32 streamIndex; + NvU8 streamType; + NvBool bEnforceType0Hdcp1xDS; + + NvBool bPendingKsvListReady; + + NvBool isHdcpCapable; + NvBool isHdcpAuthOn; + NvBool isHdcpRp; + NvBool isHdcp2X; + NvBool bMaxCascadeExceeded; + NvBool bMaxDeviceExceeded; + NvBool bHdcp1DevDownstream; + NvBool bHdcp2LegacyDevDownstream; + NvU8 cascadeDepth; +} NV0073_CTRL_SPECIFIC_HDCP_CTRL_PARAMS; + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_UNSUCCESSFUL 0:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_UNSUCCESSFUL_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_UNSUCCESSFUL_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_PENDING 1:1 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_PENDING_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_PENDING_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_BAD_TOKEN_TYPE 2:2 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_BAD_TOKEN_TYPE_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_BAD_TOKEN_TYPE_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_LINK_FAILED 3:3 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_LINK_FAILED_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_LINK_FAILED_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_INVALID_PARAMETER 4:4 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_INVALID_PARAMETER_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_ERR_INVALID_PARAMETER_YES (0x0000001U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD 31:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_NULL (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_READ_LINK_STATUS (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_VALIDATE_LINK (0x0000002U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_QUERY_HEAD_CONFIG (0x0000003U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_RENEGOTIATE (0x0000004U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_GET_ALL_FLAGS (0x0000005U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_GET_SPECIFIED_FLAGS (0x0000006U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_ABORT_AUTHENTICATION (0x0000007U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_DISABLE_AUTHENTICATION (0x0000008U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_SET_TYPE (0x0000009U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_FORWARD_KSVLIST_READY (0x000000AU) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_READ_LINK_STATUS_NO_DISPLAY (0x000000BU) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CMD_READ_TOPOLOGY (0x000000CU) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BCAPS_PRESENT 0:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BCAPS_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BCAPS_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BSTATUS_PRESENT 1:1 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BSTATUS_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BSTATUS_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_PRESENT 2:2 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_S_PRESENT 3:3 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_S_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_S_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_LIST_PRESENT 4:4 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_LIST_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_BKSV_LIST_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AN_PRESENT 5:5 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AN_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AN_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AN_S_PRESENT 6:6 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AN_S_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AN_S_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AKSV_PRESENT 7:7 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AKSV_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AKSV_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AKSV_S_PRESENT 8:8 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AKSV_S_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_AKSV_S_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_DKSV_PRESENT 9:9 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_DKSV_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_DKSV_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_DKSV_S_PRESENT 10:10 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_DKSV_S_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_DKSV_S_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_MP_PRESENT 11:11 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_MP_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_MP_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_VP_PRESENT 12:12 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_VP_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_VP_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_CN_PRESENT 13:13 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_CN_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_CN_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_CKSV_PRESENT 14:14 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_CKSV_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_CKSV_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_KP_PRESENT 15:15 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_KP_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_KP_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_KP_S_PRESENT 16:16 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_KP_S_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_KP_S_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_STATUS_PRESENT 17:17 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_STATUS_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_STATUS_PRESENT_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_CS_PRESENT 18:18 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_CS_PRESENT_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_CS_PRESENT_YES (0x0000001U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT 22:19 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_NONE (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_UNTRUST (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_UNRELBL (0x0000002U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_KSV_LEN (0x0000003U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_KSV_SIG (0x0000004U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_SRM_SIG (0x0000005U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_SRM_REV (0x0000006U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_NORDY (0x0000007U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_KSVTOP (0x0000008U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_ABORT_BADBKSV (0x0000009U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_IMPLICIT_HEAD 25:23 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_IMPLICIT_HEAD_NONE (0x0000007U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_TYPE_CHANGED 26:26 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_TYPE_CHANGED_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_TYPE_CHANGED_YES (0x0000001U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_FORCE_REAUTH 27:27 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_FORCE_REAUTH_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_FORCE_REAUTH_YES (0x0000001U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_RXIDMSG_PENDING 28:28 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_RXIDMSG_PENDING_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_FLAGS_RXIDMSG_PENDING_YES (0x0000001U) + +/* BCaps definition of HDCP over TMDS */ +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_FAST_REAUTHENTICATION 0:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_EESS_1_1 1:1 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_FAST 4:4 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_READY_KSV_FIFO 5:5 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_REPEATER 6:6 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_HDMI_RESERVED 7:7 +/* BCaps definition of HDCP over DP */ +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_DP_HDCP_CAPABLE 0:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_DP_REPEATER 1:1 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_DP_READY_KSV_FIFO 2:2 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_DP_R0_AVAILABLE 3:3 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_DP_LINK_INTEGRITY_FAILURE 4:4 + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BSTATUS_DEVICE_COUNT 6:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BSTATUS_MAX_DEVICES_EXCEEDED 7:7 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BSTATUS_REPEATER_DEPTH 10:8 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BSTATUS_MAX_CASCADE_EXCEEDED 11:11 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDMI_MODE 12:12 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_RESERVED_0 31:13 + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_ATTACH_POINTS 15:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_NON_HDCP 16:16 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_HEAD_INDEX 20:17 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_RFUPLANES 28:21 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_NUM_ACTIVE_HEADS 30:29 +// Bit 39-29 are implementation dependent connection state information +// for HDCP22 from gm206 (v02_06) onwards Bit-30 says HDCP22 encryption status. +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_HDCP22_ENCRYPTION 30:30 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_HDCP22_ENCRYPTION_YES 0x00000001U +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_HDCP22_ENCRYPTION_NO 0x00000000U +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_HDCP22_TYPE1 31:31 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_HDCP22_TYPE1_YES 0x00000001U +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_HDCP22_TYPE1_NO 0x00000000U +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_RESERVED_0 39:32 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_ATTACH_PLANES 47:40 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_ENCRYPTING 48:48 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_CS_SPAN_MODE 49:49 + +/* This HDCP_MODE definition applies to both DP and TMDS */ +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_HDCP_MODE 15:15 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_HDCP_MODE_TMDS (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_HDCP_MODE_DP (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_HDCP_VERSION 23:16 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_HDCP_VERSION_1X (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_BCAPS_HDCP_VERSION_22 (0x0000022U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BCAPS_REPEATER 0:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BCAPS_REPEATER_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BCAPS_REPEATER_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BCAPS_HDCP_CAPABLE 1:1 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BCAPS_HDCP_CAPABLE_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BCAPS_HDCP_CAPABLE_YES (0x0000001U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_DP_READY 0:0 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_DP_HPRIME_AVAILABLE 1:1 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_DP_PAIRING_AVAILABLE 2:2 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_DP_REAUTH_REQ 3:3 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_DP_LINK_INTEGRITY_FAILURE 4:4 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_HDCP1_REPEATER_DOWNSTREAM 5:5 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_HDCP2_0_REPEATER_DOWNSTREAM 6:6 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_MAX_CASCADE_EXCEEDED 7:7 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_MAX_DEVS_EXCEEDED 8:8 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_DEVICE_COUNT 13:9 +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_BSTATUS_REPEATER_DEPTH 16:14 + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_TYPE_0 (0x00U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_TYPE_1 (0x01U) + +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_ENFORCE_TYPE0_HDCP1XDS_NO (0x00U) +#define NV0073_CTRL_SPECIFIC_HDCP_CTRL_HDCP22_ENFORCE_TYPE0_HDCP1XDS_YES (0x01U) + + + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_HDCP_DIAGNOSTICS + * + * This command is used to obtain diagnostic info, useful when hdcp + * fails for the specified attach point (that being the displayId). + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the display for which information is to be + * returned. Only one display may be indicated in this parameter. + * If more than one displayId is used a failing status of + * NV_ERR_INVALID_ARGUMENT will be returned. + * flags + * This parameter specifies the diagnostics obtained from the attach point + * resource. Here are the current defined fields: + * NV0073_CTRL_SPECIFIC_HDCP_STATE_ROM_ERROR + * The hdcp hardware detected an error with the rom. Possible + * causes are that a rom is not present or if present, the hardware + * is not able to access the rom. + * NV0073_CTRL_SPECIFIC_HDCP_DIAGNOSTICS_BOND_NOT_ENABLED + * The hdcp fuse register has not been set. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_AKSV_INVALID + * If the AKSV (key selection vector) of the hardware does not return + * 20 1s and 0s, this bit will be set. This is an indication that + * the ROM is not programmed correctly and may need to be corrected + * by replacing the external hdcp cryptorom. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_BKSV_INVALID + * If the BKSV (key selection vector) of the display receiver hardware + * does not return 20 1s and 0s, this bit will be set. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_DKSV_INVALID + * If the DKSV (key selection vector) of the upstream hdcp hardware + * does not return 20 1s and 0s, this bit will be set. + * NV0073_CTRL_SPECIFIC_HDCP_STATE_DUAL_LINK_INUSE + * This bit is set if the attach point is currently outputting dual-link + * NV0073_CTRL_SPECIFIC_HDCP_STATE_DOWNSTREAM_CHECKSUM_FAILED + * This bit is set if hardware reports that its checksum BIST of its + * downstream HDCP keys failed. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDCP_DIAGNOSTICS (0x730281U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_HDCP_DIAGNOSTICS_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_HDCP_DIAGNOSTICS_PARAMS_MESSAGE_ID (0x81U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_HDCP_DIAGNOSTICS_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 flags; +} NV0073_CTRL_SPECIFIC_GET_HDCP_DIAGNOSTICS_PARAMS; + +#define NV0073_CTRL_SPECIFIC_HDCP_DIAGNOSTICS_ROM_ERROR 0:0 +#define NV0073_CTRL_SPECIFIC_HDCP_DIAGNOSTICS_BOND_NOT_ENABLED 1:1 +#define NV0073_CTRL_SPECIFIC_HDCP_DIAGNOSTICS_AKSV_INVALID 2:2 +#define NV0073_CTRL_SPECIFIC_HDCP_DIAGNOSTICS_BKSV_INVALID 3:3 +#define NV0073_CTRL_SPECIFIC_HDCP_DIAGNOSTICS_DKSV_INVALID 4:4 +#define NV0073_CTRL_SPECIFIC_HDCP_DIAGNOSTICS_DUAL_LINK_INUSE 5:5 +#define NV0073_CTRL_SPECIFIC_HDCP_DIAGNOSTICS_DOWNSTREAM_CHECKSUM_FAILED 6:6 + +/* + * NV0073_CTRL_SPECIFIC_ACPI_ID_MAPPING + * + * This structure defines the mapping between the ACPI ID and the corresponding + * display ID of a display device + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * acpiId + * The ACPI ID of the display device + * displayId + * The corresponding display ID + * dodIndex + * The corresponding DOD index + */ +typedef struct NV0073_CTRL_SPECIFIC_ACPI_ID_MAPPING { + NvU32 subDeviceInstance; + NvU32 acpiId; + NvU32 displayId; + NvU32 dodIndex; +} NV0073_CTRL_SPECIFIC_ACPI_ID_MAPPING; + +/* + * NV0073_CTRL_CMD_GET_ACPI_DOD_DISPLAY_PORT_ATTACHMENT + * + * This call will return the Display Port Attachment value + * per displayID as defined by Nvidia that is directly + * associated with the ACPI 3.0 _DOD entry's Display Port + * Attachment field. This should help clients map the + * _DOD ACPI ID to each displayID. Note, that some systems + * do not have a standard in place for this field. On those + * systems, the RM will return NV_ERR_NOT_SUPPORTED. + * + * Note that this "Display Port" attachment field has nothing + * to do with DisplayPort/DP. It's an unfortunate name inside + * the ACPI 3.0 spec that coincides with the name of DisplayPort. + * + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_NOT_SUPPORTED + * +*/ + +#define NV0073_CTRL_GET_ACPI_DOD_DISPLAY_PORT_ATTACHMENT_PARAMS_MESSAGE_ID (0x85U) + +typedef struct NV0073_CTRL_GET_ACPI_DOD_DISPLAY_PORT_ATTACHMENT_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 dispPortAttachment; +} NV0073_CTRL_GET_ACPI_DOD_DISPLAY_PORT_ATTACHMENT_PARAMS; + + +#define NV0073_CTRL_CMD_SPECIFIC_GET_ACPI_DOD_DISPLAY_PORT_ATTACHMENT (0x730285U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_GET_ACPI_DOD_DISPLAY_PORT_ATTACHMENT_PARAMS_MESSAGE_ID" */ + +// defines for dispPortAttachment +#define NV0073_DISPLAY_PORT_ATTACHMENT_ANALOG (0x00000000U) +#define NV0073_DISPLAY_PORT_ATTACHMENT_LVDS (0x00000001U) +#define NV0073_DISPLAY_PORT_ATTACHMENT_DP_A (0x00000002U) +#define NV0073_DISPLAY_PORT_ATTACHMENT_DP_B (0x00000003U) +#define NV0073_DISPLAY_PORT_ATTACHMENT_DP_C (0x00000004U) +#define NV0073_DISPLAY_PORT_ATTACHMENT_DP_D (0x00000005U) +#define NV0073_DISPLAY_PORT_ATTACHMENT_UNKNOWN (0xFFFFFFFFU) + +/* + * NV0073_CTRL_CMD_SPECIFIC_SET_ACPI_ID_MAPPING + * + * This call will update the RM data structure which holds the + * ACPI ID to display ID mapping of the display devices + * + * The input parameter is an array of structures of type + * NV0073_CTRL_SPECIFIC_ACPI_ID_MAPPING + * + * If some of the array elements remain unused, the acpiId field of the + * structure must be set to 0x0000 + * + * The size of the array is given by + * NV0073_CTRL_SPECIFIC_MAX_ACPI_DEVICES (defined below) + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * +*/ +#define NV0073_CTRL_CMD_SPECIFIC_SET_ACPI_ID_MAPPING (0x730284U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_ACPI_ID_MAPPING_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_MAX_ACPI_DEVICES 16U + +#define NV0073_CTRL_SPECIFIC_SET_ACPI_ID_MAPPING_PARAMS_MESSAGE_ID (0x84U) + +typedef struct NV0073_CTRL_SPECIFIC_SET_ACPI_ID_MAPPING_PARAMS { + NV0073_CTRL_SPECIFIC_ACPI_ID_MAPPING mapTable[NV0073_CTRL_SPECIFIC_MAX_ACPI_DEVICES]; +} NV0073_CTRL_SPECIFIC_SET_ACPI_ID_MAPPING_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_ALL_HEAD_MASK + * + * This call will return all head mask. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * headMask + * headMask is the mask of all heads that are usable. For example, if + * head 0 and head 2 are present, headMask would be NVBIT(0)|NVBIT(2). This + * parameter returns to the client. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_ARGUMENT + * + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_ALL_HEAD_MASK (0x730287U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_ALL_HEAD_MASK_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_ALL_HEAD_MASK_PARAMS_MESSAGE_ID (0x87U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_ALL_HEAD_MASK_PARAMS { + NvU32 subDeviceInstance; + NvU32 headMask; +} NV0073_CTRL_SPECIFIC_GET_ALL_HEAD_MASK_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_SET_OD_PACKET + * + * This command is used to program the display output packets. + * Currently it supports DP and HDMI. + * Common supported packets are AVI infoframes, Audio Infoframes, Gamma + * Metadata, Vendor Specific infoframes and General Control Packets (GCP). + * + GCP AVMute Enable should be performed before the start of the modeset. + * + GCP AVMute Disable should be performed after the end of the modeset. + * GCP AVMute should contain HDR + 7 bytes. + * + AVI infoframes should occur after the modeset but before a GCP AVMute + * Disable. AVI infoframe should contain HDR + 14 bytes + * + Audio infoframes should occur after the modeset but before a GCP AVMute + * Enable. + * Audio infoframe should contain HDR + 11 bytes. + * + Gamma Metadata packets should contain HDR + 28 bytes. + * + Vendor Specific packets are variable length. + * By HDMI 1.4 June 5 2009 spec, payload can be 5 bytes, 6 bytes, 7 bytes or + * 16 bytes, depending on the packets spec. + * Unused data bytes should be zero-ed out. + * + * displayID + * This parameter specifies the displayID for the display resource to + * configure. + * This comes as input to this command. + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * transmitControl + * This parameter controls how the packet is to be sent by setting the + * control bits. + * Possible flags are as follows: + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ENABLE + * Set to _ENABLE to start sending the packet at next frame, set to + * _DISABLE to stop sending. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_OTHER_FRAME + * Set to _ENABLE to send the packet at other frame, set to _DISABLE to + * send at every frame. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SINGLE_FRAME + * Set to _ENABLE to send once next frame, set to _DISABLE to send at + * every frame. + * Note: A setting to set both _OTHER_FRAME and _SINGLE_FRAME is invalid + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ON_HBLANK + * Set to _ENABLE to send the packet once on next HBLANK, set to + * _DISABLE to send on VBLANK. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_IMMEDIATE + * Set to _ENABLE to send the info frame packet as soon as possible. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_VIDEO_FMT + * Set to _SW_CONTROLLED to set HDMI_Video_Format field and 3D_Structure field + * from NV_PDISP_SF_HDMI_VSI_SUBPACK0_HIGH_PB4 and PB5, if it is set to _HW_CONTROLLED + * then HW will get them based on the state of the setHdmiCtrl method. + * Btw this applies only for stereo ovverides. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_STEREO_POLARITY + * Set to TRUE to send Vendor specific info frame used for 3D stereo LR sync. + * Set PACKET_TYPE=pktType_VendorSpecInfoFrame along with this flag. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING + * Set to TRUE to send Vendor specific info frame used for Self Refresh panels + * Set PACKET_TYPE=pktType_VendorSpecInfoFrame along with this flag. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_GEN_INFOFRAME_MODE + * HW provides support to program 2 generic infoframes per frame for DP with GP10X+. + * This flag indicates the INFOFRAME that needs to be programmed. + * Set to _INFOFRAME0 if RM should program GENERIC_INFOFRAME + * Set to _INFOFRAME1 if RM should program GENERIC_INFOFRAME1 + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE + * This option is reserved for backward compatibility with + * NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_PACKET and + * NV0073_CTRL_CMD_DP_SET_PACKET. + * It is temporal and will be deprecated soon. + * packetSize + * packet size of packets in pPacket to send, including header and payload. + * targetHead + * Specifies the target head number for which SDP needs to be updated. + * bUsePsrHeadforSdp + * Indicates use targetHead field for setting SDP or infoframe packet instead + * of deriving the active head from displayID. + * pPacket + * pPacket points to the packets to send. + * For HDMI 1.1, the maximum allowed bytes is 31. + * The packet array includes the 3 bytes of header + data depending on + * the type of packet. For an infoframe, the header bytes refer to type, + * version and length respectively. This comes as input to this command. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_SET_OD_PACKET (0x730288U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_OD_PACKET_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SET_OD_MAX_PACKET_SIZE 36U + +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_PARAMS_MESSAGE_ID (0x88U) + +typedef struct NV0073_CTRL_SPECIFIC_SET_OD_PACKET_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 transmitControl; + NvU32 packetSize; + NvU32 targetHead; + NvBool bUsePsrHeadforSdp; + NvU8 aPacket[NV0073_CTRL_SET_OD_MAX_PACKET_SIZE]; +} NV0073_CTRL_SPECIFIC_SET_OD_PACKET_PARAMS; + +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ENABLE 0:0 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ENABLE_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ENABLE_YES (0x0000001U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_OTHER_FRAME 1:1 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_OTHER_FRAME_DISABLE (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_OTHER_FRAME_ENABLE (0x0000001U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SINGLE_FRAME 2:2 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SINGLE_FRAME_DISABLE (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SINGLE_FRAME_ENABLE (0x0000001U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ON_HBLANK 3:3 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ON_HBLANK_DISABLE (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ON_HBLANK_ENABLE (0x0000001U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_IMMEDIATE 4:4 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_IMMEDIATE_DISABLE (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_IMMEDIATE_ENABLE (0x0000001U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_VIDEO_FMT 5:5 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_VIDEO_FMT_SW_CONTROLLED (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_VIDEO_FMT_HW_CONTROLLED (0x0000001U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_STEREO_POLARITY 6:6 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_STEREO_POLARITY_FALSE (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_STEREO_POLARITY_TRUE (0x0000001U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING 7:7 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING_FALSE (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING_TRUE (0x0000001U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_GEN_INFOFRAME_MODE 9:8 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_GEN_INFOFRAME_MODE_INFOFRAME0 (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_GEN_INFOFRAME_MODE_INFOFRAME1 (0x0000001U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE 31:31 +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE_NO (0x0000000U) +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE_YES (0x0000001U) + + +/* + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_PARAMS + * + * This command is used to enable/disable sending of display output packets. + * Currently it supports HDMI only. + * Unused data bytes should be zero-ed out. + * + * displayID + * This parameter specifies the displayID for the display output resource to + * configure. + * This comes as input to this command. + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * type + * The client shall specify the type of display output packet. For HDMI, set + * this according to HDMI specification 1.4. + * This comes as input to this command. + * transmitControl + * This parameter controls how the packet is to be sent by setting the control + * bits. + * Possible flags are as follows: + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_ENABLE + * Set to _ENABLE to start sending the packet at next frame, set to + * _DISABLE to stop sending. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_OTHER_FRAME + * Set to _ENABLE to send the packet at other frame, set to _DISABLE to + * send at every frame. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SINGLE_FRAME + * Set to _ENABLE to send once next frame, set to _DISABLE to send at + * every frame. + * Note: A setting to set both _OTHER_FRAME and _SINGLE_FRAME is invalid + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_ON_HBLANK + * Set to _ENABLE to send the packet once on next HBLANK, set to _DISABLE + * to send on VBLANK. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_VIDEO_FMT + * Set to _SW_CONTROLLED to set HDMI_Video_Format field and 3D_Structure field + * from NV_PDISP_SF_HDMI_VSI_SUBPACK0_HIGH_PB4 and PB5, if it is set to _HW_CONTROLLED + * then HW will get them based on the state of the setHdmiCtrl method. + * Btw this applies only for stereo ovverides. + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SET_STEREO_POLARITY + * Set to TRUE to enable Vendor specific info frame used for 3D stereo LR sync + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING + * Set to TRUE to enable Vendor specific info frame used for Self Refresh panels + * NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE + * This option is reserved for backward compatibility with + * NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_PACKET and + * NV0073_CTRL_CMD_DP_SET_PACKET. + * It is temporal and will be deprecated soon. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_SET_OD_PACKET_CTRL (0x730289U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_PARAMS_MESSAGE_ID (0x89U) + +typedef struct NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 type; + NvU32 transmitControl; +} NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_PARAMS; + +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_ENABLE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ENABLE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_ENABLE_NO NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ENABLE_NO +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_ENABLE_YES NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ENABLE_YES +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_OTHER_FRAME NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_OTHER_FRAME +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_OTHER_FRAME_DISABLE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_OTHER_FRAME_DISABLE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_OTHER_FRAME_ENABLE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_OTHER_FRAME_ENABLE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SINGLE_FRAME NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SINGLE_FRAME +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SINGLE_FRAME_DISABLE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SINGLE_FRAME_DISABLE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SINGLE_FRAME_ENABLE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SINGLE_FRAME_ENABLE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_ON_HBLANK NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ON_HBLANK +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_ON_HBLANK_DISABLE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ON_HBLANK_DISABLE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_ON_HBLANK_ENABLE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_ON_HBLANK_ENABLE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_VIDEO_FMT NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_VIDEO_FMT +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_VIDEO_FMT_SW_CONTROLLED NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_VIDEO_FMT_SW_CONTROLLED +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_VIDEO_FMT_HW_CONTROLLED NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_VIDEO_FMT_HW_CONTROLLED +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SET_STEREO_POLARITY NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_STEREO_POLARITY +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SET_STEREO_POLARITY_FALSE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_STEREO_POLARITY_FALSE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SET_STEREO_POLARITY_TRUE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_STEREO_POLARITY_TRUE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING_TRUE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING_FALSE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING_FALSE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_SET_SELF_REFRESH_SETTING_TRUE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE_NO NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE_NO +#define NV0073_CTRL_SPECIFIC_SET_OD_PACKET_CTRL_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE_YES NV0073_CTRL_SPECIFIC_SET_OD_PACKET_TRANSMIT_CONTROL_RESERVED_LEGACY_MODE_YES + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_PCLK_LIMIT + * + * This command returns the maximum supported pixel clock rate that is + * supported by the specified display device. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the display for which information is to be + * returned. Only one display may be indicated in this parameter. + * If more than one displayId is used a failing status of + * NV_ERR_INVALID_ARGUMENT will be returned. + * pclkLimit + * This parameter returns the min of orPclkLimit and vbPclkLimit in KHz. + * It may be used for SLI configs that use a video bridge. For non-SLI + * configs and bridgeless SLI configs, the client should use orPclkLimit instead. + * orPclkLimit + * This parameter returns the maximum pixel clock frequency of OR in KHz. + * vbPclkLimit + * This parameter returns the maximum pixel clock frequency of the + * video bridge (SLI) in KHz (or zero if there is no video bridge). + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_PCLK_LIMIT (0x73028aU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_PCLK_LIMIT_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_PCLK_LIMIT_PARAMS_MESSAGE_ID (0x8AU) + +typedef struct NV0073_CTRL_SPECIFIC_GET_PCLK_LIMIT_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 pclkLimit; + NvU32 orPclkLimit; + NvU32 vbPclkLimit; +} NV0073_CTRL_SPECIFIC_GET_PCLK_LIMIT_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_OR_GET_INFO + * + * This command returns output resource information for the specified display + * device. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the display for which information is to be + * returned. Only one display may be indicated in this parameter. + * If more than one displayId is used a failing status of + * NV_ERR_INVALID_ARGUMENT will be returned. + * type + * This parameter returns the output resource type. Legal values for + * this parameter include: + * NV0073_CTRL_SPECIFIC_OR_TYPE_DAC + * The output resource is a DAC. + * NV0073_CTRL_SPECIFIC_OR_TYPE_SOR + * The output resource is a serial output resource. + * NV0073_CTRL_SPECIFIC_OR_TYPE_DSI + * The output resource is a Display Serial Interface output resource. + * NV0073_CTRL_SPECIFIC_OR_TYPE_PIOR + * The output resource is a parallel input output resource. + * index + * This parameter returns the type-specific index of the output + * resource associated with the specified displayId. + * protocol + * This parameter returns the type-specific protocol used by the + * output resource. Legal values for this parameter include: + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_DAC_RGB_CRT + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_LVDS_CUSTOM + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_SINGLE_TMDS_A + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_SINGLE_TMDS_B + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_DUAL_TMDS + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_DP_A + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_DP_B + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_PIOR_EXT_TMDS_ENC + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_DSI + * NV0073_CTRL_SPECIFIC_OR_PROTOCOL_UNKNOWN + * ditherType + * This parameter returns the dither type for the output resource. + * Legal values for this parameter include: + * NV0073_CTRL_SPECIFIC_OR_DITHER_TYPE_6_BITS + * NV0073_CTRL_SPECIFIC_OR_DITHER_TYPE_8_BITS + * NV0073_CTRL_SPECIFIC_OR_DITHER_TYPE_10_BITS + * NV0073_CTRL_SPECIFIC_OR_DITHER_TYPE_OFF + * ditherAlgo + * This parameter returns the dithering algorithm used by the output + * resource. Legal values for this parameter include: + * NV0073_CTRL_SPECIFIC_OR_DITHER_ALOGO_DYNAMIC_ERR_ACC + * NV0073_CTRL_SPECIFIC_OR_DITHER_ALOGO_STATIC_ERR_ACC + * NV0073_CTRL_SPECIFIC_OR_DITHER_ALOGO_DYNAMIC_2X2 + * NV0073_CTRL_SPECIFIC_OR_DITHER_ALOGO_STATIC_2X2 + * NV0073_CTRL_SPECIFIC_OR_DITHER_ALOGO_TEMPORAL + * NV0073_CTRL_SPECIFIC_OR_DITHER_ALOGO_UNKNOWN + * location + * This parameter returns the physical location of the output resource. + * Legal values for this parameter include: + * NV0073_CTRL_SPECIFIC_OR_LOCATION_CHIP + * NV0073_CTRL_SPECIFIC_OR_LOCATION_BOARD + * rootPortId + * This parameter specifies the Root-Port ID for the given display. + * dcbIndex + * This parameter returns the DCB index of the display device. + * vbiosAddress + * This parameter is the VBIOS IP address which will have valid value + * only if displayId is allocated by VBIOS. + * bIsLitByVbios + * This parameter specifies that whether displayID allocation was + * requested by VBIOS or not. + * bIsDispDynamic + * Returns NV_TRUE if DisplayID is allocated Dynamically else NV_FALSE + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_OR_GET_INFO (0x73028bU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_OR_GET_INFO_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_OR_GET_INFO_PARAMS_MESSAGE_ID (0x8BU) + +typedef struct NV0073_CTRL_SPECIFIC_OR_GET_INFO_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 index; + NvU32 type; + NvU32 protocol; + NvU32 ditherType; + NvU32 ditherAlgo; + NvU32 location; + NvU32 rootPortId; + NvU32 dcbIndex; + NV_DECLARE_ALIGNED(NvU64 vbiosAddress, 8); + NvBool bIsLitByVbios; + NvBool bIsDispDynamic; +} NV0073_CTRL_SPECIFIC_OR_GET_INFO_PARAMS; + +/* valid type values */ +#define NV0073_CTRL_SPECIFIC_OR_TYPE_NONE (0x00000000U) +#define NV0073_CTRL_SPECIFIC_OR_TYPE_DAC (0x00000001U) +#define NV0073_CTRL_SPECIFIC_OR_TYPE_SOR (0x00000002U) +#define NV0073_CTRL_SPECIFIC_OR_TYPE_PIOR (0x00000003U) + + +#define NV0073_CTRL_SPECIFIC_OR_TYPE_DSI (0x00000005U) + +/* valid DAC protocol values */ +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_DAC_RGB_CRT (0x00000000U) + + + +/* valid SOR protocol values */ +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_LVDS_CUSTOM (0x00000000U) +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_SINGLE_TMDS_A (0x00000001U) +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_SINGLE_TMDS_B (0x00000002U) +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_DUAL_TMDS (0x00000005U) +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_DP_A (0x00000008U) +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_DP_B (0x00000009U) +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_SOR_DSI (0x00000010U) + +/* valid DSI protocol values */ +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_DSI (0x00000011U) + +/* valid PIOR protocol values */ +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_PIOR_EXT_TMDS_ENC (0x00000000U) + +/* valid UNKNOWN protocol value */ +#define NV0073_CTRL_SPECIFIC_OR_PROTOCOL_UNKNOWN (0xFFFFFFFFU) + +/* valid ditherType values */ +#define NV0073_CTRL_SPECIFIC_OR_DITHER_TYPE_6_BITS (0x00000000U) +#define NV0073_CTRL_SPECIFIC_OR_DITHER_TYPE_8_BITS (0x00000001U) +#define NV0073_CTRL_SPECIFIC_OR_DITHER_TYPE_10_BITS (0x00000002U) +#define NV0073_CTRL_SPECIFIC_OR_DITHER_TYPE_OFF (0x00000003U) + +/* valid ditherAlgo values */ +#define NV0073_CTRL_SPECIFIC_OR_DITHER_ALGO_DYNAMIC_ERR_ACC (0x00000000U) +#define NV0073_CTRL_SPECIFIC_OR_DITHER_ALGO_STATIC_ERR_ACC (0x00000001U) +#define NV0073_CTRL_SPECIFIC_OR_DITHER_ALGO_DYNAMIC_2X2 (0x00000002U) +#define NV0073_CTRL_SPECIFIC_OR_DITHER_ALGO_STATIC_2X2 (0x00000003U) +#define NV0073_CTRL_SPECIFIC_OR_DITHER_ALGO_TEMPORAL (0x00000004U) +#define NV0073_CTRL_SPECIFIC_OR_DITHER_ALGO_UNKNOWN (0xFFFFFFFFU) + +/* valid location values */ +#define NV0073_CTRL_SPECIFIC_OR_LOCATION_CHIP (0x00000000U) +#define NV0073_CTRL_SPECIFIC_OR_LOCATION_BOARD (0x00000001U) + +/* + * NV0073_CTRL_CMD_SPECIFIC_HDCP_KSVLIST_VALIDATE + * + * This Command initiate the KSV validation for the specific device + * if it is a repeater. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * displayId + * This parameter specifies the ID of the root port device for which KsvList is to be validated + * bUseCachedKsvList + * The parameter specifies RM to use cachedKsvList in case BCAPS's READY bit not set to read + * ksvList. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_NOT_SUPPORTED + * NV_ERR_NOT_READY + */ +#define NV0073_CTRL_CMD_SPECIFIC_HDCP_KSVLIST_VALIDATE (0x73028dU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_HDCP_KSVLIST_VALIDATE_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_HDCP_KSVLIST_VALIDATE_PARAMS_MESSAGE_ID (0x8DU) + +typedef struct NV0073_CTRL_SPECIFIC_HDCP_KSVLIST_VALIDATE_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvBool bUseCachedKsvList; +} NV0073_CTRL_SPECIFIC_HDCP_KSVLIST_VALIDATE_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_HDCP_UPDATE + * + * This Command updates the display to the proper HDCP state based on + * whether it has been newly connected or disconnected. This is called + * during a hotplug event. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * displayId + * This parameter specifies the ID of the root port device to update + * bIsConnected + * This parameter specifies whether the device has been connected (NV_TRUE) + * or disconnected (NV_FALSE). + * + * Possible status values returned are: + * NV_OK + * NV_ERR_NOT_SUPPORTED + */ +#define NV0073_CTRL_CMD_SPECIFIC_HDCP_UPDATE (0x73028eU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_HDCP_UPDATE_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_HDCP_UPDATE_PARAMS_MESSAGE_ID (0x8EU) + +typedef struct NV0073_CTRL_SPECIFIC_HDCP_UPDATE_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvBool bIsConnected; +} NV0073_CTRL_SPECIFIC_HDCP_UPDATE_PARAMS; + + + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_BACKLIGHT_BRIGHTNESS + * NV0073_CTRL_CMD_SPECIFIC_SET_BACKLIGHT_BRIGHTNESS + * + * These commands retrieve and set the user backlight brightness for + * the specified display. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * displayId + * Display for which brightness is to be retrieved or set. + * brightness + * The backlight brightness in the range [0,100], inclusive. This + * is an input for SET_BACKLIGHT_BRIGHTNESS, and an output for + * GET_BACKLIGHT_BRIGHTNESS. + * brightnessType + * This can take in one of the three parameters: + * NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_TYPE_PERCENT100(for percentage brightness with value calibrated to 100 scale), + * NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_TYPE_PERCENT1000(for percentage brightness with uncalibrated values), + * NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_TYPE_NITS(used when panel supports Nits based) + * based on the brightness control method to be used. + * + * Possible status values returned include: + * NV_OK + * NV_ERR_NOT_SUPPORTED + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_BACKLIGHT_BRIGHTNESS (0x730291U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_BACKLIGHT_BRIGHTNESS_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_BACKLIGHT_BRIGHTNESS_MIN_VALUE 0U +#define NV0073_CTRL_BACKLIGHT_BRIGHTNESS_MAX_VALUE 100U + +typedef struct NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 brightness; + NvBool bUncalibrated; + NvU8 brightnessType; +} NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_PARAMS; +#define NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_TYPE_PERCENT100 1 +#define NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_TYPE_PERCENT1000 2 +#define NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_TYPE_NITS 3 + +#define NV0073_CTRL_SPECIFIC_GET_BACKLIGHT_BRIGHTNESS_PARAMS_MESSAGE_ID (0x91U) + +typedef NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_PARAMS NV0073_CTRL_SPECIFIC_GET_BACKLIGHT_BRIGHTNESS_PARAMS; + +#define NV0073_CTRL_CMD_SPECIFIC_SET_BACKLIGHT_BRIGHTNESS (0x730292U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_BACKLIGHT_BRIGHTNESS_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_BACKLIGHT_BRIGHTNESS_PARAMS_MESSAGE_ID (0x92U) + +typedef NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_PARAMS NV0073_CTRL_SPECIFIC_SET_BACKLIGHT_BRIGHTNESS_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS + * + * This command is used to inform RM about the scrambling, clock mode, FRL and + * DSC caps of the HDMI sink device. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed.. + * displayID + * This parameter specifies the displayID for the display output resource to + * configure. + * caps + * This parameter specifies the sink caps. + * GT_340MHZ_CLOCK_SUPPORTED refers to whether sink supports TMDS clock (sorClk) rate greater than 340 MHz + * LTE_340MHZ_SCRAMBLING_SUPPORTED refers to whether scrambling is supported for clock rate at or below 340 MHz + * SCDC_SUPPORTED refers to whether SCDC access is supported on sink + * MAX_FRL_RATE_SUPPORTED refers to the maximum HDMI 2.1 FRL rate supported + * DSC_12_SUPPORTED refers to whether VESA DSC v1.2a is supported + * DSC_12_MAX_FRL_RATE_SUPPORTED refers to the maximum HDMI 2.1 FRL rate supported when VESA DSC v1.2a is supported + * + * + * Possible status values returned include: + * NV_OK + * NV_ERR_NOT_SUPPORTED + */ +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS (0x730293U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_HDMI_SINK_CAPS_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_HDMI_SINK_CAPS_PARAMS_MESSAGE_ID (0x93U) + +typedef struct NV0073_CTRL_SPECIFIC_SET_HDMI_SINK_CAPS_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 caps; +} NV0073_CTRL_SPECIFIC_SET_HDMI_SINK_CAPS_PARAMS; + +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_GT_340MHZ_CLOCK_SUPPORTED 0:0 +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_GT_340MHZ_CLOCK_SUPPORTED_FALSE (0x00000000U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_GT_340MHZ_CLOCK_SUPPORTED_TRUE (0x00000001U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_LTE_340MHZ_SCRAMBLING_SUPPORTED 1:1 +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_LTE_340MHZ_SCRAMBLING_SUPPORTED_FALSE (0x00000000U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_LTE_340MHZ_SCRAMBLING_SUPPORTED_TRUE (0x00000001U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_SCDC_SUPPORTED 2:2 +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_SCDC_SUPPORTED_FALSE (0x00000000U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_SCDC_SUPPORTED_TRUE (0x00000001U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_MAX_FRL_RATE_SUPPORTED 5:3 +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_MAX_FRL_RATE_SUPPORTED_NONE (0x00000000U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_MAX_FRL_RATE_SUPPORTED_3LANES_3G (0x00000001U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_MAX_FRL_RATE_SUPPORTED_3LANES_6G (0x00000002U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_MAX_FRL_RATE_SUPPORTED_4LANES_6G (0x00000003U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_MAX_FRL_RATE_SUPPORTED_4LANES_8G (0x00000004U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_MAX_FRL_RATE_SUPPORTED_4LANES_10G (0x00000005U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_MAX_FRL_RATE_SUPPORTED_4LANES_12G (0x00000006U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_12_SUPPORTED 6:6 +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_12_SUPPORTED_FALSE (0x00000000U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_12_SUPPORTED_TRUE (0x00000001U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_MAX_FRL_RATE_SUPPORTED 9:7 +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_MAX_FRL_RATE_SUPPORTED_NONE (0x00000000U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_MAX_FRL_RATE_SUPPORTED_3LANES_3G (0x00000001U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_MAX_FRL_RATE_SUPPORTED_3LANES_6G (0x00000002U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_MAX_FRL_RATE_SUPPORTED_4LANES_6G (0x00000003U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_MAX_FRL_RATE_SUPPORTED_4LANES_8G (0x00000004U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_MAX_FRL_RATE_SUPPORTED_4LANES_10G (0x00000005U) +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_SINK_CAPS_DSC_MAX_FRL_RATE_SUPPORTED_4LANES_12G (0x00000006U) + + + +/* + * NV0073_CTRL_CMD_SPECIFIC_SET_MONITOR_POWER + * + * This command sets monitor power on/off. + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * displayId + * This parameter specifies the displayID for the display output resource to + * configure. + * powerState + * This parameter should be one of the valid + * NV0073_CTRL_SPECIFIC_SET_MONITOR_POWER_* values. + * headIdx + * The head id on which power operation needs to be done. + * bForceMonitorState + * Monitor power state that client wants to force in RM. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_SPECIFIC_SET_MONITOR_POWER (0x730295U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_MONITOR_POWER_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_MONITOR_POWER_PARAMS_MESSAGE_ID (0x95U) + +typedef struct NV0073_CTRL_SPECIFIC_SET_MONITOR_POWER_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 powerState; + NvU32 headIdx; + NvBool bForceMonitorState; +} NV0073_CTRL_SPECIFIC_SET_MONITOR_POWER_PARAMS; + +#define NV0073_CTRL_SPECIFIC_SET_MONITOR_POWER_OFF (0x00000000U) +#define NV0073_CTRL_SPECIFIC_SET_MONITOR_POWER_ON (0x00000001U) + + + +/* +* NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_FRL_CONFIG +* +* This command is used to perform HDMI FRL link training and enable FRL mode for +* the specified displayId. The link configuration will be returned after link +* training success. +* +* subDeviceInstance +* This parameter specifies the subdevice instance within the +* NV04_DISPLAY_COMMON parent device to which the operation should be +* directed. +* displayID +* This parameter specifies the displayID for the display output resource to +* configure. +* data +* This parameter is an input and output to this command. +* Here are the current defined fields: +* NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE +* This field specifies the desired setting for lane count. A client may +* choose any lane count as long as it does not exceed the capability of +* HDMI FRL sink as indicated in the sink capability field. +* The valid values for this field are: +* NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_NONE +* For 0 lane configuration, link training is shut down (disable FRL). +* NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_3LANES_3G +* For FRL 3-lane configuration and 3 Gbps bandwidth per lane. +* NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_3LANES_6G +* For FRL 3-lane configuration and 6 Gbps bandwidth per lane. +* NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_4LANES_6G +* For FRL 4-lane configuration and 6 Gbps bandwidth per lane. +* NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_4LANES_8G +* For FRL 4-lane configuration and 8 Gbps bandwidth per lane. +* NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_4LANES_10G +* For FRL 4-lane configuration and 10 Gbps bandwidth per lane. +* NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_4LANES_12G +* For FRL 4-lane configuration and 12 Gbps bandwidth per lane. +* On return, the link bandwidth setting is returned which may be +* different from the requested input setting. +* bFakeLt +* This flag as input to this command. +* It indicates the FRL link training is a fake link training or not. +* TRUE if the FRL link training is fake and no real sink device attached. +* bLtSkipped +* The flag returned indicating whether link training is skipped or not. +* TRUE if link training is skipped due to the link config is not changed. +* bLinkAssessmentOnly +* The flag as input to this command. It indicates that the client is doing +* link training only for the link assessment, no FRL video transmission is +* intended. +* +* Possible status values returned include: +* NV_OK - +* Affter finishing link tranning, NV_OK status will be returned along with +* the updated link congiration. In case of link training failure, FRL_RATE_NONE +* will be returned with NV_OK. +* NV_ERR_NOT_SUPPORTED - +* If the GPU/sink is not capable for HDMI FRL, NV_ERR_NOT_SUPPORTED status +* will be returned. +* NV_ERR_INVALID_ARGUMENT +* If any argument is valid for this control call, NV_ERR_INVALID_ARGUMENT +* status will be returned. +*/ +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_FRL_CONFIG (0x73029aU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_HDMI_FRL_LINK_CONFIG_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_HDMI_FRL_LINK_CONFIG_PARAMS_MESSAGE_ID (0x9AU) + +typedef struct NV0073_CTRL_SPECIFIC_SET_HDMI_FRL_LINK_CONFIG_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 data; + NvBool bFakeLt; + NvBool bDoNotSkipLt; + NvBool bLtSkipped; + NvBool bLinkAssessmentOnly; +} NV0073_CTRL_SPECIFIC_SET_HDMI_FRL_LINK_CONFIG_PARAMS; + +#define NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE 2:0 +#define NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_NONE (0x00000000U) +#define NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_3LANES_3G (0x00000001U) +#define NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_3LANES_6G (0x00000002U) +#define NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_4LANES_6G (0x00000003U) +#define NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_4LANES_8G (0x00000004U) +#define NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_4LANES_10G (0x00000005U) +#define NV0073_CTRL_HDMI_FRL_DATA_SET_FRL_RATE_4LANES_12G (0x00000006U) + +/* +* NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_FRL_FLUSH_MODE +* +* This command is used to enable flush mode on given HDMI displayId in +* preparation for FRL link training. The flush mode can be enabled only if HDMI +* display is active and driven by FRL protocol. If display is not active then +* this control command does nothing. +* +* subDeviceInstance +* This parameter specifies the subdevice instance within the +* NV04_DISPLAY_COMMON parent device to which the operation should be +* directed. +* displayID +* This parameter specifies the displayID for the display output resource to +* configure. +* bEnable +* This parameter is an inputto this command. +* +* Possible status values returned include: +* NV_OK +* NV_ERR_INVALID_ARGUMENT +* If any argument is invalid for this control call, NV_ERR_INVALID_ARGUMENT +* status will be returned. +*/ +#define NV0073_CTRL_CMD_SPECIFIC_SET_HDMI_FRL_FLUSH_MODE (0x73029bU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_HDMI_FRL_FLUSH_MODE_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_HDMI_FRL_FLUSH_MODE_PARAMS_MESSAGE_ID (0x9BU) + +typedef struct NV0073_CTRL_SPECIFIC_SET_HDMI_FRL_FLUSH_MODE_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvBool bEnable; +} NV0073_CTRL_SPECIFIC_SET_HDMI_FRL_FLUSH_MODE_PARAMS; + + + +#define NV0073_CTRL_SPECIFIC_MAX_CRC_REGIONS 9U + +#define NV0073_CTRL_CMD_SPECIFIC_GET_REGIONAL_CRCS_PARAMS_MESSAGE_ID (0xA0U) + +typedef struct NV0073_CTRL_CMD_SPECIFIC_GET_REGIONAL_CRCS_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 regionCrcs[NV0073_CTRL_SPECIFIC_MAX_CRC_REGIONS]; + NvU16 reqRegionCrcMask; +} NV0073_CTRL_CMD_SPECIFIC_GET_REGIONAL_CRCS_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_REGIONAL_CRCS + * + * This command is used to capture the active viewport region CRCs + * + * [in]subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * + * [in]displayId + * This parameter specifies the displayId of panel, for which region CRC to be captured +.* + * [out]regionCrcs + * This field holds the region CRC values to be returned after successful completion of the control command. + * + * [in]reqRegionCrcMask + * This parameter specifies BIT mask value of requested CRC regions. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_GENERIC + * NV_ERR_INVALID_ARGUMENT + * + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_REGIONAL_CRCS (0x7302a0U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_CMD_SPECIFIC_GET_REGIONAL_CRCS_PARAMS_MESSAGE_ID" */ + +/* +* NV0073_CTRL_CMD_SPECIFIC_APPLY_EDID_OVERRIDE_V2 +* +* Apply EDID override on specific OD. +* +* subDeviceInstance +* This parameter specifies the subdevice instance within the +* NV04_DISPLAY_COMMON parent device to which the operation should be +* directed. +* displayId (in) +* ID of panel on which the operation is to be performed. +* bufferSize (in) +* Size of the EDID buffer. +* edidBuffer (in/out) +* The buffer which stores the EDID before and after override. +* +* Possible status values returned are: +* NV_OK +* NV_ERR_INVALID_PARAMETER +*/ +#define NV0073_CTRL_CMD_SPECIFIC_APPLY_EDID_OVERRIDE_V2 (0x7302a1U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_APPLY_EDID_OVERRIDE_V2_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_APPLY_EDID_OVERRIDE_V2_PARAMS_MESSAGE_ID (0xA1U) + +typedef struct NV0073_CTRL_SPECIFIC_APPLY_EDID_OVERRIDE_V2_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 bufferSize; + NvU8 edidBuffer[NV0073_CTRL_SPECIFIC_GET_EDID_MAX_EDID_BYTES]; +} NV0073_CTRL_SPECIFIC_APPLY_EDID_OVERRIDE_V2_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS + * + * This command is used to get the HDMI FRL caps of GPU side. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * caps + * This parameter specifies the GPU caps. + * MAX_FRL_RATE_SUPPORTED refers to the maximum HDMI 2.1 FRL link rate supported + * + * + * Possible status values returned include: + * NV_OK + * NV_ERR_NOT_SUPPORTED + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS (0x7302a2U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_HDMI_GPU_CAPS_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_HDMI_GPU_CAPS_PARAMS_MESSAGE_ID (0xA2U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_HDMI_GPU_CAPS_PARAMS { + NvU32 subDeviceInstance; + NvU32 caps; +} NV0073_CTRL_SPECIFIC_GET_HDMI_GPU_CAPS_PARAMS; + +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS_MAX_FRL_LINK_RATE_SUPPORTED 2:0 +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS_MAX_FRL_LINK_RATE_SUPPORTED_NONE (0x00000000U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS_MAX_FRL_LINK_RATE_SUPPORTED_3LANES_3G (0x00000001U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS_MAX_FRL_LINK_RATE_SUPPORTED_3LANES_6G (0x00000002U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS_MAX_FRL_LINK_RATE_SUPPORTED_4LANES_6G (0x00000003U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS_MAX_FRL_LINK_RATE_SUPPORTED_4LANES_8G (0x00000004U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS_MAX_FRL_LINK_RATE_SUPPORTED_4LANES_10G (0x00000005U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_GPU_CAPS_MAX_FRL_LINK_RATE_SUPPORTED_4LANES_12G (0x00000006U) + + + +/* + * NV0073_CTRL_CMD_SPECIFIC_DISPLAY_CHANGE + * + * Notifies the system that a display change is about to begin/end. + * Also performs the necessary synchronizations for the same. + * + * The command takes a NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_PARAMS structure as an + * argument with appropriate subDeviceInstance. + * + * [in]subDeviceInstance + * The sub-device instance + * [in]newDevices + * Bitmask of devices that are planned on being enabled with the + * pending device change. + * [in]properties + * Bitmask of display attributes for new configuration (none used at the moment). + * [in]enable + * Parameter to decide between display change start and end. Can take values + * NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_START or NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_END. + * Possible return values: + * NV_OK + * NV_ERR_INVALID_ARGUMENT + * + */ + +#define NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_PARAMS_MESSAGE_ID (0xA4U) + +typedef struct NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_PARAMS { + + NvU32 subDeviceInstance; + NvU32 newDevices; + NvU32 properties; + NvU32 enable; +} NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_PARAMS; + +#define NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_END (0x00000000U) +#define NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_START (0x00000001U) + +#define NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_PROPERTIES_SPANNING (0x00000001U) + +#define NV0073_CTRL_CMD_SPECIFIC_DISPLAY_CHANGE (0x7302a4U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_DISPLAY_CHANGE_PARAMS_MESSAGE_ID" */ + + + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA + * + * This command is used to get the HDMI sink status/caps via Status and Control + * Data Channel (SCDC). + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * displayId + * This parameter specifies the displayId of HDMI sink. + * offset + * This parameter specifies the SCDC offset which the read operation + * should be used. + * data + * This field specifies the return data from sink for reading the specified + * SCDC offset. + * + * + * Possible status values returned include: + * NV_OK + * NV_ERR_NOT_SUPPORTED + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA (0x7302a6U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_HDMI_SCDC_DATA_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_GET_HDMI_SCDC_DATA_PARAMS_MESSAGE_ID (0xA6U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_HDMI_SCDC_DATA_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU8 offset; + NvU8 data; +} NV0073_CTRL_SPECIFIC_GET_HDMI_SCDC_DATA_PARAMS; + +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET 7:0 +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_NONE (0x00000000U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_SINK_VERSION (0x00000001U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_SOURCE_VERSION (0x00000002U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_UPDATE_FLAGS_0 (0x00000010U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_TMDS_CONFIGURATION (0x00000020U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_SCRAMBLER_STATUS (0x00000021U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CONFIGURATION_0 (0x00000030U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CONFIGURATION_1 (0x00000031U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_SOURCE_TEST_CONFIGURATION (0x00000035U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_STATUS_FLAGS_0 (0x00000040U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_STATUS_FLAGS_1 (0x00000041U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_STATUS_FLAGS_2 (0x00000042U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CED_0 (0x00000050U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CED_1 (0x00000051U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CED_2 (0x00000052U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CED_3 (0x00000053U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CED_4 (0x00000054U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CED_5 (0x00000055U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CED_6 (0x00000056U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CED_7 (0x00000057U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_CED_8 (0x00000058U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_RSED_0 (0x00000059U) +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_SCDC_DATA_OFFSET_RSED_1 (0x0000005AU) + +/* + * NV0073_CTRL_CMD_SPECIFIC_IS_DIRECTMODE_DISPLAY + * + * This command is used to query whether the specified monitor should be used + * with directmode. + * + * [in]manufacturerID + * This parameter specifies the 16-bit EDID Manufacturer ID. + * [in]productID + * This parameter specifies the 16-bit EDID Product ID. + * [out]bIsDirectmode; + * This indicates whether the monitor should be used with directmode. + * Possible return values: + * NV_OK + */ + +#define NV0073_CTRL_CMD_SPECIFIC_IS_DIRECTMODE_DISPLAY (0x7302a7U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_IS_DIRECTMODE_DISPLAY_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_IS_DIRECTMODE_DISPLAY_PARAMS_MESSAGE_ID (0xA7U) + +typedef struct NV0073_CTRL_SPECIFIC_IS_DIRECTMODE_DISPLAY_PARAMS { + NvU16 manufacturerID; + NvU16 productID; + NvBool bIsDirectmode; +} NV0073_CTRL_SPECIFIC_IS_DIRECTMODE_DISPLAY_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION + * + * This command is used to get the HDMI FRL capacity computation result. + * + * [in] cmd + * This parameter specifies the command for the HDMI FRL capacity computation. + * [in] input + * This parameter specifies the input data for the HDMI FRL capacity + * computation. + * [out] result + * This indicates the computation result of HDMI FRL capacity computation. + * [in/out] preCalc + * This indicates the pre-caculation result of HDMI FRL capacity computation. + * [in/out] dsc + * This indicates the DSC parameters of HDMI FRL capacity computation. + * Possible return values: + * NV_OK + */ + +#define NV0073_CTRL_CMD_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION (0x7302a8U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_PARAMS_MESSAGE_ID" */ + +typedef struct NV0073_CTRL_FRL_CAPACITY_COMPUTATION_PARAMS { + NvU32 numLanes; + NvU32 frlBitRateGbps; + NvU32 pclk10KHz; + NvU32 hTotal; + NvU32 hActive; + NvU32 bpc; + NvU32 pixelPacking; + NvU32 audioType; + NvU32 numAudioChannels; + NvU32 audioFreqKHz; + + struct { + NvU32 bppTargetx16; + NvU32 hSlices; + NvU32 sliceWidth; + NvU32 dscTotalChunkKBytes; + } compressionInfo; +} NV0073_CTRL_FRL_CAPACITY_COMPUTATION_PARAMS; + +typedef struct NV0073_CTRL_FRL_CAPACITY_COMPUTATION_RESULT { + NvU32 frlRate; + NvU32 bppTargetx16; + NvBool engageCompression; + NvBool isAudioSupported; + NvBool dataFlowDisparityReqMet; + NvBool dataFlowMeteringReqMet; + NvBool isVideoTransportSupported; + NvU32 triBytesBorrowed; + NvU32 hcActiveBytes; + NvU32 hcActiveTriBytes; + NvU32 hcBlankTriBytes; + NvU32 tBlankToTTotalX1k; +} NV0073_CTRL_FRL_CAPACITY_COMPUTATION_RESULT; + +typedef struct NV0073_CTRL_FRL_PRE_CALC_CONFIG { + NvU32 vic; + NvU32 packing; + NvU32 bpc; + NvU32 frlRate; + NvU32 bppX16; + NvBool bHasPreCalcFRLData; +} NV0073_CTRL_FRL_PRE_CALC_CONFIG; + +typedef struct NV0073_CTRL_IS_FRL_DSC_POSSIBLE_PARAMS { + NvU32 maxSliceCount; + NvU32 maxSliceWidth; + NvBool bIsDSCPossible; +} NV0073_CTRL_IS_FRL_DSC_POSSIBLE_PARAMS; + +#define NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_PARAMS_MESSAGE_ID (0xA8U) + +typedef struct NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_PARAMS { + NvU8 cmd; + NV0073_CTRL_FRL_CAPACITY_COMPUTATION_PARAMS input; + NV0073_CTRL_FRL_CAPACITY_COMPUTATION_RESULT result; + NV0073_CTRL_FRL_PRE_CALC_CONFIG preCalc; + NV0073_CTRL_IS_FRL_DSC_POSSIBLE_PARAMS dsc; +} NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_PARAMS; + +#define NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_CMD_NULL (0x00000000U) +#define NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_CMD_UNCOMPRESSED_VIDEO (0x00000001U) +#define NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_CMD_COMPRESSED_VIDEO (0x00000002U) +#define NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_CMD_HAS_PRECAL_FRL_DATA (0x00000003U) +#define NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_CMD_GET_PRECAL_UNCOMPRESSED_FRL_CONFIG (0x00000004U) +#define NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_CMD_GET_PRECAL_COMPRESSED_FRL_CONFIG (0x00000005U) +#define NV0073_CTRL_SPECIFIC_GET_HDMI_FRL_CAPACITY_COMPUTATION_CMD_IS_FRL_DSC_POSSIBLE (0x00000006U) + +/* + * NV0073_CTRL_CMD_SPECIFIC_SET_SHARED_GENERIC_PACKET + * + * This command is used to program the display output packets. + * This generic packets can be used for both HDMI and DP. + * HW has added 6 new generic packets for each head because some usecases have + * requirement to send infoframe in particular location (vsync, vblank, loadV). + * + * Note: 1. Client first needs to reserve or acquire a free infoframe index + * using NV0073_CTRL_CMD_SPECIFIC_ACQUIRE_SHARED_GENERIC_PACKET. + * 2. Client needs to update the SDP index for head through control call + * NV0073_CTRL_CMD_SPECIFIC_SET_SHARED_GENERIC_PACKET + * 3. Client needs to Release the infoframe index using control call + * NV0073_CTRL_CMD_SPECIFIC_RELEASE_SHARED_GENERIC_PACKET + * + * [in]subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * [in]transmitControl + * This parameter controls how the packet is to be sent by setting the + * control bits. + * Possible flags are as follows: + * NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_ENABLE + * Setting this field to _YES will enable this generic infoframe, + * Setting this field to _NO will disable this generic infoframe. + * NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_SINGLE + * Set to _YES will cause new infoframe to be transmitted exactly once. + * Set to _NO will cause new infoframe to be transmitted every frame. + * NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_LOC + * SDP can be sent in 3 different locations: + * VBLANK - new infoframe will be sent at Vblank. + * VSYNC - new infoframe will be sent at Vsync. + * LOADV - new infoframe will be triggered by LOADV, and sent at Vsync + * NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_UPDATE_RFB_OVERRIDE + * _ENABLE: override DB1 bit1 with existence of loadv (for Panel Self Refresh) + * _DISABLE: do not override shared generic infoframe subpacker DB1 bit1. + * NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_SU_COORDINATES_VALID_OVERRIDE + * _ENABLE: override DB1 bit3 with existence of loadv (for Panel Replay) + * _DISABLE: do not override shared generic infoframe subpacker DB1 bit3. + * [in]packetSize + * size of packets in Packet array to send, including header and payload. + * [in]infoframeIndex + * Specifies the target head number for which SDP needs to be updated. + * [in]infoframeIndex + * Specifies the index of infoframe. + * [in]packet + * pPacket points to the packets to send. + * For HDMI 1.1, the maximum allowed bytes is 31. + * The packet array includes the 3 bytes of header + data depending on + * the type of packet. For an infoframe, the header bytes refer to type, + * version and length respectively. This comes as input to this command. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ + +#define NV0073_CTRL_CMD_SPECIFIC_SET_SHARED_GENERIC_PACKET (0x7302a9) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_SHARED_GENERIC_PACKET_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_SHARED_GENERIC_PACKET_PARAMS_MESSAGE_ID (0xA9U) + +typedef struct NV0073_CTRL_SPECIFIC_SET_SHARED_GENERIC_PACKET_PARAMS { + NvU32 subDeviceInstance; + NvU32 transmitControl; + NvU32 packetSize; + NvU32 targetHeadIndex; + NvU32 infoframeIndex; + NvU8 packet[NV0073_CTRL_SET_OD_MAX_PACKET_SIZE]; +} NV0073_CTRL_SPECIFIC_SET_SHARED_GENERIC_PACKET_PARAMS; + +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_ENABLE 0:0 +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_ENABLE_NO (0x0000000) +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_ENABLE_YES (0x0000001) + +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_SINGLE 1:1 +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_SINGLE_NO (0x0000000) +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_SINGLE_YES (0x0000001) + +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_LOC 5:2 +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_LOC_VBLANK (0x0000000) +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_LOC_VSYNC (0x0000001) +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_LOC_LOADV (0x0000002) + +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_STATE_OVERRIDE 6:6 +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_STATE_OVERRIDE_DISABLE (0x0000000) +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_STATE_OVERRIDE_ENABLE (0x0000001) + +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_UPDATE_RFB_OVERRIDE 7:7 +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_UPDATE_RFB_OVERRIDE_DISABLE (0x0000000) +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_UPDATE_RFB_OVERRIDE_ENABLE (0x0000001) + +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_SU_COORDINATES_VALID_OVERRIDE 8:8 +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_SU_COORDINATES_VALID_OVERRIDE_DISABLE (0x0000000) +#define NV0073_CTRL_SPECIFIC_SHARED_GENERIC_CTRL_VSC_SDP_SU_COORDINATES_VALID_OVERRIDE_ENABLE (0x0000001) + +/* + * NV0073_CTRL_CMD_SPECIFIC_ACQUIRE_SHARED_GENERIC_PACKET + * + * This command is used to reserve the infoframe for head and RM would assign + * free infoframe index and return the index of infoframe. Later client needs + * to call control call NV0073_CTRL_CMD_SPECIFIC_RELEASE_SHARED_GENERIC_PACKET + * to release the index. + * + * [in]subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * [in]targetHeadIndex + * target Head for which SDP needs to be sent + * [out]infoframeIndex + * return Infoframe Index for head. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_INSUFFIENT_RESOURCES + */ + +#define NV0073_CTRL_CMD_SPECIFIC_ACQUIRE_SHARED_GENERIC_PACKET (0x7302aa) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_ACQUIRE_SHARED_GENERIC_PACKET_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_ACQUIRE_SHARED_GENERIC_PACKET_PARAMS_MESSAGE_ID (0xAAU) + +typedef struct NV0073_CTRL_SPECIFIC_ACQUIRE_SHARED_GENERIC_PACKET_PARAMS { + NvU32 subDeviceInstance; + NvU32 targetHeadIndex; + NvU32 infoframeIndex; +} NV0073_CTRL_SPECIFIC_ACQUIRE_SHARED_GENERIC_PACKET_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_RELEASE_SHARED_GENERIC_PACKET + * + * This command is used to release the infoframe index which was acquired by + * client. + * + * [in]subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * [in]targetHeadIndex + * Specifies the target head number for which SDP needs to be updated. + * [in]infoframeIndex + * Infoframe index for the target head + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ + +#define NV0073_CTRL_CMD_SPECIFIC_RELEASE_SHARED_GENERIC_PACKET (0x7302ab) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_RELEASE_SHARED_GENERIC_PACKET_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_RELEASE_SHARED_GENERIC_PACKET_PARAMS_MESSAGE_ID (0xABU) + +typedef struct NV0073_CTRL_SPECIFIC_RELEASE_SHARED_GENERIC_PACKET_PARAMS { + NvU32 subDeviceInstance; + NvU32 targetHeadIndex; + NvU32 infoframeIndex; +} NV0073_CTRL_SPECIFIC_RELEASE_SHARED_GENERIC_PACKET_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_DISP_I2C_READ_WRITE + * + * This command is used to do I2C R/W to slave on display i2c instance. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * i2cPort + * This parameter specifies the I2C CCB port ID. + * i2cSlaveAddress + * This parameter specifies the I2C slave address. + * readWriteFlag + * This parameter specifies whether its read/write operation. + * readWriteLen + * This parameter specifies the length of the read/write buffer + * readBuffer + * This parameter reads the data from slave address and copies to this + * buffer + * writeBuffer + * This parameter specifies this buffer data that would be written to + * slave address + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ + +#define NV0073_CTRL_CMD_SPECIFIC_DISP_I2C_READ_WRITE (0x7302acU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_DISP_I2C_READ_WRITE_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_DISP_I2C_READ_WRITE_BUF_LEN 128U + +#define NV0073_CTRL_SPECIFIC_DISP_I2C_READ_WRITE_PARAMS_MESSAGE_ID (0xACU) + +typedef struct NV0073_CTRL_SPECIFIC_DISP_I2C_READ_WRITE_PARAMS { + NvU32 subDeviceInstance; + NvU32 i2cPort; + NvU32 i2cSlaveAddress; + NvU32 readWriteFlag; + NvU32 readWriteLen; + NvU8 readBuffer[NV0073_CTRL_SPECIFIC_DISP_I2C_READ_WRITE_BUF_LEN]; + NvU8 writeBuffer[NV0073_CTRL_SPECIFIC_DISP_I2C_READ_WRITE_BUF_LEN]; +} NV0073_CTRL_SPECIFIC_DISP_I2C_READ_WRITE_PARAMS; + +#define NV0073_CTRL_SPECIFIC_DISP_I2C_READ_MODE (0x00000001) +#define NV0073_CTRL_SPECIFIC_DISP_I2C_WRITE_MODE (0x00000000) + +/* + * NV0073_CTRL_CMD_GET_VALID_HEAD_WINDOW_ASSIGNMENT + * + * This command returns the valid window head assignment mask + * + * windowHeadMask [out] + * This out parameter is an array which holds the head mask for + * each window. The Nth element in the array would be a bitmask + * of which heads can possibly drive window N. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_GENERIC + */ +#define NV0073_CTRL_CMD_SPECIFIC_GET_VALID_HEAD_WINDOW_ASSIGNMENT (0x7302ad) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_VALID_HEAD_WINDOW_ASSIGNMENT_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_MAX_WINDOWS 32U +#define NV0073_CTRL_SPECIFIC_FLEXIBLE_HEAD_WINDOW_ASSIGNMENT (0xFFU) + +#define NV0073_CTRL_SPECIFIC_GET_VALID_HEAD_WINDOW_ASSIGNMENT_PARAMS_MESSAGE_ID (0xADU) + +typedef struct NV0073_CTRL_SPECIFIC_GET_VALID_HEAD_WINDOW_ASSIGNMENT_PARAMS { + NvU32 subDeviceInstance; + NvU8 windowHeadMask[NV0073_CTRL_SPECIFIC_MAX_WINDOWS]; +} NV0073_CTRL_SPECIFIC_GET_VALID_HEAD_WINDOW_ASSIGNMENT_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_DEFAULT_ADAPTIVESYNC_DISPLAY + * + * This command is used to query whether the specified monitor should default + * to adaptive sync. + * + * [in]manufacturerID + * This parameter specifies the 16-bit EDID Manufacturer ID. + * [in]productID + * This parameter specifies the 16-bit EDID Product ID. + * [out]bDefaultAdaptivesync; + * This indicates whether the monitor should default to adaptive sync. + * Possible return values: + * NV_OK + */ + +#define NV0073_CTRL_CMD_SPECIFIC_DEFAULT_ADAPTIVESYNC_DISPLAY (0x7302aeU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_DEFAULT_ADAPTIVESYNC_DISPLAY_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_DEFAULT_ADAPTIVESYNC_DISPLAY_PARAMS_MESSAGE_ID (0xAEU) + +typedef struct NV0073_CTRL_SPECIFIC_DEFAULT_ADAPTIVESYNC_DISPLAY_PARAMS { + NvU16 manufacturerID; + NvU16 productID; + NvBool bDefaultAdaptivesync; +} NV0073_CTRL_SPECIFIC_DEFAULT_ADAPTIVESYNC_DISPLAY_PARAMS; + +/* + * NV0073_CTRL_CMD_SPECIFIC_GET_DISPLAY_BRIGHTNESS_LTM + * NV0073_CTRL_CMD_SPECIFIC_SET_DISPLAY_BRIGHTNESS_LTM + * These commands retrieve and set the brightness level and Local Tone Mapping (LTM) settings for + * the specified display. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * + * displayId + * Display for which brightness/LTM settings is to be retrieved or set. + * + * brightnessMilliNits + * the display brightness in the millinits units in the [0,10000000] range, inclusive. + * + * transitionTimeMs + * the transition time for display brightness to transition from current brightness level to the brightnessMilliNits + * + * bUncalibrated + * if true the parameter indicates brightnessMilliNits has to be interpreted as brightness % value, in 0.001% units + * + * bAdaptiveBrightness + * if true the brightnessMilliNits is set by the OS in the response to the ambient light sensor (ALS) input (if present on the system) + * + * bBoostRange + * if true the brightnessMilliNits value is set by the OS in the response to the ambient light sensor (ALS) input (if present on the system) + * Indicating very bright ambient light environment + * + * ambientIlluminance + * if bAdaptiveBrightness = true, ambientIlluminance represents an ambient illuminance value reported by the ALS sensor, in 0.001 Lux units + * + * ambientChromaticityX + * if bAdaptiveBrightness = true, ambientChromaticityX represents X chromaticity value reported by ALS sensor, in 0.001 units of [0,1] range + * + * ambientChromaticityY + * if bAdaptiveBrightness = true, ambientChromaticityY represents Y chromaticity value reported by ALS sensor, in 0.001 units of [0,1] range + * + * bLtmEnable + * if set to true, enable LTM functionality in GPU display HW. Set to true by default. + * + * bEnhanceContrast + * if bLtmEnable = true, and if set to true, enhance local contrast via LTM regardless of any other contrast enhancement driver policies. Set to false by default. + * + * contrastGain + * if bLtmEnable = true, this is used to how gain we need to apply on the contrast. + * + * detailGain + * if bLtmEnable = true, how much details needs to be boosted is indicated by this parameter. + * + * bContentAdaptiveBrightness + * if bLtmEnable = true, and if set to true, modify display backlight level and adjust pixel values dynamically on per-frame basis to perform content adaptive brightness control to reduce display power. Set to false by default. + * + * bDynamicHdrTonemapping + * if bLtmEnable = true, and if set to true, and output is HDR, enable dynamic per frame HDR tonemapping. Set to false by default. + * + * maxDisplayLuminance + * maximum display luminance + * + * maxOutputLuminance + * maximum output luminance considering the protocol limit (SDR/HDR) and maximum display luminance. + * + * luminanceSscalingFactor + * HDR tone mapping luminance scaling factor + * + * Possible status values returned include: + * NV_OK + * NV_ERR_NOT_SUPPORTED + */ + +typedef struct NV0073_CTRL_SPECIFIC_DISPLAY_BRIGHTNESS_LTM_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 brightnessMilliNits; + NvU32 transitionTimeMs; + NvBool bUncalibrated; + NvBool bAdaptiveBrightness; + NvBool bBoostRange; + NvU32 ambientIlluminance; + NvU32 ambientChromaticityX; + NvU32 ambientChromaticityY; + NvBool bEnhanceContrast; + NvU16 contrastGain; + NvU16 detailGain; + NvBool bContentAdaptiveBrightness; + NvBool bDynamicHdrTonemapping; + NvU32 maxDisplayLuminance; + NvU32 maxOutputLuminance; + NvU32 luminanceScalingFactor; +} NV0073_CTRL_SPECIFIC_DISPLAY_BRIGHTNESS_LTM_PARAMS; + +#define NV0073_CTRL_SPECIFIC_GET_DISPLAY_BRIGHTNESS_LTM_PARAMS_MESSAGE_ID (0xAFU) + +typedef NV0073_CTRL_SPECIFIC_DISPLAY_BRIGHTNESS_LTM_PARAMS NV0073_CTRL_SPECIFIC_GET_DISPLAY_BRIGHTNESS_LTM_PARAMS; + +#define NV0073_CTRL_CMD_SPECIFIC_GET_DISPLAY_BRIGHTNESS_LTM (0x7302afU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_GET_DISPLAY_BRIGHTNESS_LTM_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_SPECIFIC_SET_DISPLAY_BRIGHTNESS_LTM_PARAMS_MESSAGE_ID (0xB0U) + +typedef NV0073_CTRL_SPECIFIC_DISPLAY_BRIGHTNESS_LTM_PARAMS NV0073_CTRL_SPECIFIC_SET_DISPLAY_BRIGHTNESS_LTM_PARAMS; + +#define NV0073_CTRL_CMD_SPECIFIC_SET_DISPLAY_BRIGHTNESS_LTM (0x7302b0U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_SPECIFIC_SET_DISPLAY_BRIGHTNESS_LTM_PARAMS_MESSAGE_ID" */ + +/* +* NV0073_CTRL_CMD_GET_REGISTER_OFFSET_FOR_ULMB_TIMESTAMP +* +* The command returns the offset of the disp registers for sending timestamp +* directly to RISCV, so that clients may map them directly and write to this +* register which will trigger interrupt in RISCV. +* +* Possible status values returned are: +* NV_OK +* NV_ERR_NOT_SUPPORTED +*/ + +#define NV0073_CTRL_CMD_GET_REGISTER_OFFSET_FOR_ULMB_TIMESTAMP (0x7302b1U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_SPECIFIC_INTERFACE_ID << 8) | NV0073_CTRL_GET_REGISTER_OFFSET_FOR_ULMB_TIMESTAMP_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_GET_REGISTER_OFFSET_FOR_ULMB_TIMESTAMP_PARAMS_MESSAGE_ID (0xB1U) + +typedef struct NV0073_CTRL_GET_REGISTER_OFFSET_FOR_ULMB_TIMESTAMP_PARAMS { + NvU32 subDeviceInstance; + NvU32 dispRegisterBase; +} NV0073_CTRL_GET_REGISTER_OFFSET_FOR_ULMB_TIMESTAMP_PARAMS; +/* _ctrl0073specific_h_ */ |