diff options
| author | Arthur Hanson Rasmusson <arthur@vgpu.io> | 2026-09-13 18:36:21 -0400 |
|---|---|---|
| committer | Arthur Hanson Rasmusson <arthur@vgpu.io> | 2026-09-13 18:36:21 -0400 |
| commit | 00e54c13c7c9030c4d5f7151467f2d85a3730e29 (patch) | |
| tree | 17a45239df8d2e4912ff3697ed06e85a10b969de /userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073dfp.h | |
| download | open-iov-00e54c13c7c9030c4d5f7151467f2d85a3730e29.tar.gz open-iov-00e54c13c7c9030c4d5f7151467f2d85a3730e29.zip | |
Initial commit: Open-IOV vGPU-IO complete stack
- Firmware decompilation: GSP 570.144W (28.5MB ELF, RV64IMAC), 132 decompiled C files
- Kernel modules: nvidia.ko (34MB, OpenRM), open-iov-vfio.ko (2.8MB, VFIO mdev), gsp-vgpu.ko (1.8MB, guest driver)
- Userspace: libiov.so/libvgpu.so (76KB), example_vgpu (28KB), rpc_emulator.c
- PCI config space emulation (256B with PM, MSI, MSI-X, PCIe caps)
- 12 RPC types fully mapped from firmware decompilation
- BAR trap, WPR, scheduling, notification, migration emulation
- Helper scripts: load_vgpu_stack, create_mdev, launch_qemu_vgpu, test_vgpu_stack, setup_guest_driver, unload_vgpu_stack
- Architecture documentation
- Wiki: 10 technical documents
- Git LFS for large binaries (.ko, .bin, .iso, .img, .o, ghidra repos)
- nvidia-open-gpu-kernel-modules as submodule
Diffstat (limited to 'userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073dfp.h')
| -rw-r--r-- | userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073dfp.h | 1884 |
1 files changed, 1884 insertions, 0 deletions
diff --git a/userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073dfp.h b/userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073dfp.h new file mode 100644 index 0000000..b8dce37 --- /dev/null +++ b/userspace/sdks/nv570/inc/ctrl/ctrl0073/ctrl0073dfp.h @@ -0,0 +1,1884 @@ +/* + * SPDX-FileCopyrightText: Copyright (c) 2005-2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved. + * SPDX-License-Identifier: MIT + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#pragma once + +#include <nvtypes.h> + +// +// This file was generated with FINN, an NVIDIA coding tool. +// Source file: ctrl/ctrl0073/ctrl0073dfp.finn +// + +#include "ctrl/ctrl0073/ctrl0073base.h" +#include "ctrl/ctrl0073/ctrl0073common.h" + +#include "nvcfg_sdk.h" + +/* NV04_DISPLAY_COMMON dfp-display-specific control commands and parameters */ + +/* + * NV0073_CTRL_CMD_DFP_GET_INFO + * + * This command can be used to determine the associated display type for + * the specified displayId. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the ID of the display for which the dfp + * caps should be returned. The display ID must be a dfp display + * as determined with the NV0073_CTRL_CMD_SPECIFIC_GET_TYPE command. + * If more than one displayId bit is set or the displayId is not a dfp, + * this call will return NV_ERR_INVALID_ARGUMENT. + * flags + * This parameter returns the information specific to this dfp. Here are + * the possible fields: + * NV0073_CTRL_DFP_FLAGS_SIGNAL + * This specifies the type of signal used for this dfp. + * NV0073_CTRL_DFP_FLAGS_LANES + * This specifies whether the board supports 1, 2, or 4 lanes + * for DISPLAYPORT signals. + * NV0073_CTRL_DFP_FLAGS_LIMIT + * Some GPUs were not qualified to run internal TMDS except at 60 HZ + * refresh rates. So, if LIMIT_60HZ_RR is set, then the client must + * make sure to only allow 60 HZ refresh rate modes to the OS/User. + * NV0073_CTRL_DFP_FLAGS_SLI_SCALER + * While running in SLI, if SLI_SCALER_DISABLE is set, the GPU cannot + * scale any resolutions. So, the output timing must match the + * memory footprint. + * NV0073_CTRL_DFP_FLAGS_HDMI_CAPABLE + * This specifies whether the DFP displayId is capable of + * transmitting HDMI. + * NV0073_CTRL_DFP_FLAGS_RANGE_LIMITED_CAPABLE + * This specifies whether the displayId is capable of sending a + * limited color range out from the board. + * NV0073_CTRL_DFP_FLAGS_RANGE_AUTO_CAPABLE + * This specifies whether the displayId is capable of auto-configuring + * the color range. + * NV0073_CTRL_DFP_FLAGS_FORMAT_YCBCR422_CAPABLE + * This specifies whether the displayId is capable of sending the + * YCBCR422 color format out from the board. + * NV0073_CTRL_DFP_FLAGS_FORMAT_YCBCR444_CAPABLE + * This specifies whether the displayId is capable of sending + * YCBCR444 color format out from the board. + * NV0073_CTRL_DFP_FLAGS_TYPE_C_TO_DP_CONNECTOR + * This specifies whether the displayId is a DP connector routed to an USB-TYPE-C port. + * NV0073_CTRL_DFP_FLAGS_DP_LINK_BANDWIDTH + * This specifies max link rate supported by the displayId, if the DFP is + * display port. + * NV0073_CTRL_DFP_FLAGS_HDMI_ALLOWED + * This specifies whether the DFP displayId is allowed to transmit HDMI + * based on the VBIOS settings. + * NV0073_CTRL_DFP_FLAGS_EMBEDDED_DISPLAYPORT + * This specifies whether the DFP displayId is actually an embedded display + * port based on VBIOS connector information AND ASSR cap. + * NV0073_CTRL_DFP_FLAGS_DP_LINK_CONSTRAINT + * This specifies whether the DFP displayId must be trained to RBR mode + * (if it is using DP protocol) whenever possible. + * NV0073_CTRL_DFP_FLAGS_LINK + * This specifies whether the board supports single or dual links + * for TMDS, LVDS, and SDI signals. + * NV0073_CTRL_DFP_FLAGS_DP_POST_CURSOR2_DISABLED + * This specifies if PostCursor2 is disabled in the VBIOS + * NV0073_CTRL_DFP_FLAGS_DSI_DEVICE_ID + * This indicates whether this SOR uses DSI-A, DSI-B or both (ganged mode). + * NV0073_CTRL_DFP_FLAGS_DYNAMIC_MUX_CAPABLE + * This indicates whether this DFP supports DDS (NV dynamic display mux). + * UHBRSupportedByDfp + * Bitmask to specify the UHBR link rates supported by this dfp. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_DFP_GET_INFO (0x731140U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_GET_INFO_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_GET_INFO_PARAMS_MESSAGE_ID (0x40U) + +typedef struct NV0073_CTRL_DFP_GET_INFO_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 flags; + NvU32 UHBRSupportedByDfp; +} NV0073_CTRL_DFP_GET_INFO_PARAMS; + +/* valid display types */ +#define NV0073_CTRL_DFP_FLAGS_SIGNAL 2:0 +#define NV0073_CTRL_DFP_FLAGS_SIGNAL_TMDS (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_SIGNAL_LVDS (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_SIGNAL_SDI (0x00000002U) +#define NV0073_CTRL_DFP_FLAGS_SIGNAL_DISPLAYPORT (0x00000003U) +#define NV0073_CTRL_DFP_FLAGS_SIGNAL_DSI (0x00000004U) +#define NV0073_CTRL_DFP_FLAGS_SIGNAL_WRBK (0x00000005U) +#define NV0073_CTRL_DFP_FLAGS_LANE 5:3 +#define NV0073_CTRL_DFP_FLAGS_LANE_NONE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_LANE_SINGLE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_LANE_DUAL (0x00000002U) +#define NV0073_CTRL_DFP_FLAGS_LANE_QUAD (0x00000003U) +#define NV0073_CTRL_DFP_FLAGS_LANE_OCT (0x00000004U) +#define NV0073_CTRL_DFP_FLAGS_LIMIT 6:6 +#define NV0073_CTRL_DFP_FLAGS_LIMIT_DISABLE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_LIMIT_60HZ_RR (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_SLI_SCALER 7:7 +#define NV0073_CTRL_DFP_FLAGS_SLI_SCALER_NORMAL (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_SLI_SCALER_DISABLE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_HDMI_CAPABLE 8:8 +#define NV0073_CTRL_DFP_FLAGS_HDMI_CAPABLE_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_HDMI_CAPABLE_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_RANGE_LIMITED_CAPABLE 9:9 +#define NV0073_CTRL_DFP_FLAGS_RANGE_LIMITED_CAPABLE_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_RANGE_LIMITED_CAPABLE_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_RANGE_AUTO_CAPABLE 10:10 +#define NV0073_CTRL_DFP_FLAGS_RANGE_AUTO_CAPABLE_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_RANGE_AUTO_CAPABLE_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_FORMAT_YCBCR422_CAPABLE 11:11 +#define NV0073_CTRL_DFP_FLAGS_FORMAT_YCBCR422_CAPABLE_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_FORMAT_YCBCR422_CAPABLE_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_FORMAT_YCBCR444_CAPABLE 12:12 +#define NV0073_CTRL_DFP_FLAGS_FORMAT_YCBCR444_CAPABLE_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_FORMAT_YCBCR444_CAPABLE_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_TYPE_C_TO_DP_CONNECTOR 13:13 +#define NV0073_CTRL_DFP_FLAGS_TYPE_C_TO_DP_CONNECTOR_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_TYPE_C_TO_DP_CONNECTOR_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_HDMI_ALLOWED 14:14 +#define NV0073_CTRL_DFP_FLAGS_HDMI_ALLOWED_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_HDMI_ALLOWED_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_EMBEDDED_DISPLAYPORT 15:15 +#define NV0073_CTRL_DFP_FLAGS_EMBEDDED_DISPLAYPORT_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_EMBEDDED_DISPLAYPORT_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_DP_LINK_CONSTRAINT 16:16 +#define NV0073_CTRL_DFP_FLAGS_DP_LINK_CONSTRAINT_NONE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_DP_LINK_CONSTRAINT_PREFER_RBR (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_DP_LINK_BW 19:17 +#define NV0073_CTRL_DFP_FLAGS_DP_LINK_BW_1_62GBPS (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_DP_LINK_BW_2_70GBPS (0x00000002U) +#define NV0073_CTRL_DFP_FLAGS_DP_LINK_BW_5_40GBPS (0x00000003U) +#define NV0073_CTRL_DFP_FLAGS_DP_LINK_BW_8_10GBPS (0x00000004U) +#define NV0073_CTRL_DFP_FLAGS_LINK 21:20 +#define NV0073_CTRL_DFP_FLAGS_LINK_NONE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_LINK_SINGLE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_LINK_DUAL (0x00000002U) +#define NV0073_CTRL_DFP_FLAGS_DP_FORCE_RM_EDID 22:22 +#define NV0073_CTRL_DFP_FLAGS_DP_FORCE_RM_EDID_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_DP_FORCE_RM_EDID_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_DSI_DEVICE_ID 24:23 +#define NV0073_CTRL_DFP_FLAGS_DSI_DEVICE_ID_DSI_NONE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_DSI_DEVICE_ID_DSI_A (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_DSI_DEVICE_ID_DSI_B (0x00000002U) +#define NV0073_CTRL_DFP_FLAGS_DSI_DEVICE_ID_DSI_GANGED (0x00000003U) +#define NV0073_CTRL_DFP_FLAGS_DP_POST_CURSOR2_DISABLED 25:25 +#define NV0073_CTRL_DFP_FLAGS_DP_POST_CURSOR2_DISABLED_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_DP_POST_CURSOR2_DISABLED_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS_DP_PHY_REPEATER_COUNT 29:26 +#define NV0073_CTRL_DFP_FLAGS_DYNAMIC_MUX_CAPABLE 30:30 +#define NV0073_CTRL_DFP_FLAGS_DYNAMIC_MUX_CAPABLE_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS_DYNAMIC_MUX_CAPABLE_TRUE (0x00000001U) + +#define NV0073_CTRL_DFP_FLAGS2_DP_UHBR_SUPPORTED_10_0GBPS 0:0 +#define NV0073_CTRL_DFP_FLAGS2_DP_UHBR_SUPPORTED_10_0GBPS_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS2_DP_UHBR_SUPPORTED_10_0GBPS_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS2_DP_UHBR_SUPPORTED_13_5GBPS 1:1 +#define NV0073_CTRL_DFP_FLAGS2_DP_UHBR_SUPPORTED_13_5GBPS_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS2_DP_UHBR_SUPPORTED_13_5GBPS_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_FLAGS2_DP_UHBR_SUPPORTED_20_0GBPS 2:2 +#define NV0073_CTRL_DFP_FLAGS2_DP_UHBR_SUPPORTED_20_0GBPS_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_FLAGS2_DP_UHBR_SUPPORTED_20_0GBPS_TRUE (0x00000001U) + + + +/* + * NV0073_CTRL_CMD_DFP_GET_DP2TMDS_DONGLE_INFO + * + * This command can be used to determine information about dongles attached + * to a displayport connection. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the ID of the dfp display which owns the + * panel power to adjust. The display ID must be a dfp display + * as determined with the NV0073_CTRL_CMD_SPECIFIC_GET_TYPE command. + * If more than one displayId bit is set or the displayId is not a dfp, + * this call will return NV_ERR_INVALID_ARGUMENT. + * flags + * This parameter provide state information about the dongle attachments. + * NV0073_CTRL_DFP_GET_DP2TMDS_DONGLE_INFO_FLAGS_CAPABLE + * Specifies if the connection is capable of a dongle. This field + * returns false in all cases of signal types except for those capable + * of outputting TMDS. Even then the if a gpio is not defined, the + * the a statement of false will also be returned. + * NV0073_CTRL_DFP_GET_DP2TMDS_DONGLE_INFO_FLAGS_ATTACHED + * When attached, this value specifies that a dongle is detected and + * attached. The client should read the _TYPE field to determine + * if it is a dp2hdmi or dp2dvi dongle. + * NV0073_CTRL_DFP_GET_DP2TMDS_DONGLE_INFO_FLAGS_TYPE + * _DP2DVI: no response to i2cAddr 0x80 per DP interop guidelines. + * clients MUST avoid outputting HDMI even if capable. + * _DP2HDMI: dongle responds to i2cAddr 0x80 per DP interop guidelines. + * client is allowed to output HDMI when possible. + * _LFH_DVI: DMS59-DVI breakout dongle is in use. + * _LFH_VGA: DMS59-VGA breakout dongle is in use. + * NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_DP2TMDS_DONGLE_TYPE + * _1: Max TMDS Clock rate is 165 MHz for both DVI and HDMI. + * _2: Max TMDS Clock rate will be specified in the dongle + * address space at device address 0x80. + * DVI is up to 165 MHz + * HDMI is up to 300 MHz + * There are type 2 devices that support beyond 600 MHz + * though not defined in the spec. + * maxTmdsClkRateHz + * This defines the max TMDS clock rate for dual mode adaptor in Hz. + */ +#define NV0073_CTRL_CMD_DFP_GET_DISPLAYPORT_DONGLE_INFO (0x731142U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_PARAMS_MESSAGE_ID (0x42U) + +typedef struct NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 flags; + NvU32 maxTmdsClkRateHz; +} NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_PARAMS; + +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_CAPABLE 0:0 +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_CAPABLE_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_CAPABLE_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_ATTACHED 1:1 +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_ATTACHED_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_ATTACHED_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_TYPE 7:4 +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_TYPE_DP2DVI (0x00000000U) +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_TYPE_DP2HDMI (0x00000001U) +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_TYPE_LFH_DVI (0x00000002U) +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_TYPE_LFH_VGA (0x00000003U) +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_DP2TMDS_DONGLE_TYPE 8:8 +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_DP2TMDS_DONGLE_TYPE_1 (0x00000000U) +#define NV0073_CTRL_DFP_GET_DISPLAYPORT_DONGLE_INFO_FLAGS_DP2TMDS_DONGLE_TYPE_2 (0x00000001U) + +/* + * NV0073_CTRL_CMD_DFP_SET_ELD_AUDIO_CAPS + * + * This command is used to inform hardware the receiver's audio capabilities + * using the new EDID Like Data (ELD) memory structure. The ELD memory + * structure is read by the audio driver by issuing the ELD Data command verb. + * This mechanism is used for passing sink device' audio EDID information + * from graphics software to audio software. ELD contents will contain a + * subset of the sink device's EDID information. + * The client should inform hardware at initial boot, a modeset, and whenever + * a hotplug event occurs. + * + * displayId + * This parameter indicates the digital display device's + * mask. This comes as input to this command. + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be directed. + * This parameter must specify a value between zero and the total number + * of subdevices within the parent device. This parameter should be set + * to zero for default behavior. + * numELDSize + * This parameter specifies how many bytes of data RM should write to the + * ELD buffer. Section 7.3.3.36 of the ECN specifies that the ELD buffer + * size of zero based. HDAudio driver will then use this information to + * determine how many bytes of the ELD buffer the HDAudio should read. + * The maximum size of the buffer is 96 bytes. + * bufferELD + * This buffer contains data as defined in the ECR HDMI ELD memory structure. + * Refer to the ELD Memory Structure Specification for more details. + * The format should be: + * - Header block is fixed at 4 bytes + * The header block contains the ELD version and baseline ELD len as + * well as some reserved fields. + * - Baseline block for audio descriptors is 76 bytes + * (15 SAD; each SAD=3 bytes requiring 45 bytes with 31 bytes to spare) + * As well as some other bits used to denote the CEA version, + * the speaker allocation data, monitor name, connector type, and + * hdcp capabilities. + * - Vendor specific block of 16 bytes + * maxFreqSupported + * Supply the maximum frequency supported for the overall audio caps. + * This value should match CEA861-X defines for sample freq. + * ctrl: + * NV0073_CTRL_DFP_SET_ELD_AUDIO_CAPS_CTRL_PD: + * Specifies the presence detect of the receiver. On a hotplug + * or modeset client should set this bit to TRUE. + * NV0073_CTRL_DFP_SET_ELD_AUDIO_CAPS_CTRL_ELDV: + * Specifies whether the ELD buffer contents are valid. + * An intrinsic unsolicited response (UR) is generated whenever + * the ELDV bit changes in value and the PD=1. When _PD=1(hotplug), + * RM will set the ELDV bit after ELD buffer contents are written. + * If _ELDV bit is set to false such as during a unplug, then the + * contents of the ELD buffer will be cleared. + * deviceEntry: + * The deviceEntry number from which the SF should accept packets. + * _NONE if disabling audio. + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + */ +#define NV0073_CTRL_CMD_DFP_SET_ELD_AUDIO_CAPS (0x731144U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_SET_ELD_AUDIO_CAP_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_ELD_BUFFER 96U + +#define NV0073_CTRL_DFP_SET_ELD_AUDIO_CAP_PARAMS_MESSAGE_ID (0x44U) + +typedef struct NV0073_CTRL_DFP_SET_ELD_AUDIO_CAP_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 numELDSize; + NvU8 bufferELD[NV0073_CTRL_DFP_ELD_AUDIO_CAPS_ELD_BUFFER]; + NvU32 maxFreqSupported; + NvU32 ctrl; + NvU32 deviceEntry; +} NV0073_CTRL_DFP_SET_ELD_AUDIO_CAP_PARAMS; + +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_MAX_FREQ_SUPPORTED_0320KHZ (0x00000001U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_MAX_FREQ_SUPPORTED_0441KHZ (0x00000002U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_MAX_FREQ_SUPPORTED_0480KHZ (0x00000003U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_MAX_FREQ_SUPPORTED_0882KHZ (0x00000004U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_MAX_FREQ_SUPPORTED_0960KHZ (0x00000005U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_MAX_FREQ_SUPPORTED_1764KHZ (0x00000006U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_MAX_FREQ_SUPPORTED_1920KHZ (0x00000007U) + +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_CTRL_PD 0:0 +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_CTRL_PD_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_CTRL_PD_TRUE (0x00000001U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_CTRL_ELDV 1:1 +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_CTRL_ELDV_FALSE (0x00000000U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_CTRL_ELDV_TRUE (0x00000001U) + +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_DEVICE_ENTRY_0 (0x00000000U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_DEVICE_ENTRY_1 (0x00000001U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_DEVICE_ENTRY_2 (0x00000002U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_DEVICE_ENTRY_3 (0x00000003U) +#define NV0073_CTRL_DFP_ELD_AUDIO_CAPS_DEVICE_ENTRY_NONE (0x00000007U) + + + +/* + * NV0073_CTRL_CMD_DFP_GET_SPREAD_SPECTRUM_STATUS + * + * This command is used to get spread spectrum status for a display device. + * + * displayId + * Display ID for which the spread spectrum status is needed. + * checkRMSsState + * Default is to check in Vbios. This flag lets this control call to check in register. + * status + * Return status value. + */ + +#define NV0073_CTRL_CMD_DFP_GET_SPREAD_SPECTRUM (0x73114cU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_GET_SPREAD_SPECTRUM_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_GET_SPREAD_SPECTRUM_PARAMS_MESSAGE_ID (0x4CU) + +typedef struct NV0073_CTRL_DFP_GET_SPREAD_SPECTRUM_PARAMS { + NvU32 displayId; + NvBool enabled; +} NV0073_CTRL_DFP_GET_SPREAD_SPECTRUM_PARAMS; + +/* + * NV0073_CTRL_CMD_DFP_UPDATE_DYNAMIC_DFP_CACHE + * + * Update the Dynamic DFP with Bcaps read from remote display. + * Also updates hdcpFlags, gpu hdcp capable flags in DFP. + * If bResetDfp is true, all the flags are reset before making changes. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + */ + +#define NV0073_CTRL_CMD_DFP_UPDATE_DYNAMIC_DFP_CACHE (0x73114eU) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_UPDATE_DYNAMIC_DFP_CACHE_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_UPDATE_DYNAMIC_DFP_CACHE_PARAMS_MESSAGE_ID (0x4EU) + +typedef struct NV0073_CTRL_DFP_UPDATE_DYNAMIC_DFP_CACHE_PARAMS { + NvU32 subDeviceInstance; + NvU32 headIndex; + NvU8 bcaps; + NvU8 bksv[5]; + NvU32 hdcpFlags; + NvBool bHdcpCapable; + NvBool bResetDfp; + NvU8 updateMask; +} NV0073_CTRL_DFP_UPDATE_DYNAMIC_DFP_CACHE_PARAMS; + +#define NV0073_CTRL_DFP_UPDATE_DYNAMIC_DFP_CACHE_MASK_BCAPS 0x01U +#define NV0073_CTRL_DFP_UPDATE_DYNAMIC_DFP_CACHE_MASK_BKSV 0x02U +#define NV0073_CTRL_DFP_UPDATE_DYNAMIC_DFP_CACHE_MASK_FLAGS 0x03U + +/* + * NV0073_CTRL_CMD_DFP_SET_AUDIO_ENABLE + * + * This command sets the audio enable state of the DFP. When disabled, + * no audio stream packets or audio timestamp packets will be sent. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the ID of the display for which the dfp + * audio should be enabled or disabled. The display ID must be a dfp display. + * If the displayId is not a dfp, this call will return + * NV_ERR_INVALID_ARGUMENT. + * enable + * This parameter specifies whether to enable (NV_TRUE) or disable (NV_FALSE) + * audio to the display. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * + * + */ +#define NV0073_CTRL_CMD_DFP_SET_AUDIO_ENABLE (0x731150U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_SET_AUDIO_ENABLE_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_SET_AUDIO_ENABLE_PARAMS_MESSAGE_ID (0x50U) + +typedef struct NV0073_CTRL_DFP_SET_AUDIO_ENABLE_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvBool enable; +} NV0073_CTRL_DFP_SET_AUDIO_ENABLE_PARAMS; + + +/* + * NV0073_CTRL_DFP_ASSIGN_SOR_LINKCONFIG + * + * This variable specifies default/primary/secondary sor sublinks to be configured. + * These access modes are: + * + * NV0073_CTRL_DFP_ASSIGN_SOR_FORCE_NONE + * Default link config + * NV0073_CTRL_DFP_ASSIGN_SOR_FORCE_PRIMARY_SOR_LINK + * Primary sor sublink to be configured + * NV0073_CTRL_DFP_ASSIGN_SOR_FORCE_SECONDARY_SOR_LINK + * Secondary sor sublink to be configured + */ +typedef NvU32 NV0073_CTRL_DFP_ASSIGN_SOR_LINKCONFIG; + +#define NV0073_CTRL_DFP_ASSIGN_SOR_FORCE_NONE (0x0U) +#define NV0073_CTRL_DFP_ASSIGN_SOR_FORCE_PRIMARY_SOR_LINK (0x1U) +#define NV0073_CTRL_DFP_ASSIGN_SOR_FORCE_SECONDARY_SOR_LINK (0x2U) + +/* + * NV0073_CTRL_DFP_ASSIGN_SOR_INFO + * + * This structure describes info about assigned SOR + * + * displayMask + * The displayMask for the SOR corresponding to its HW routings + * sorType + * This parameter specifies the SOR type + * Here are the current defined fields: + * NV0073_CTRL_DFP_SOR_TYPE_NONE + * Unallocated SOR + * NV0073_CTRL_DFP_SOR_TYPE_2H1OR_PRIMARY + * Primary SOR for 2H1OR stream + * NV0073_CTRL_DFP_SOR_TYPE_2H1OR_SECONDARY + * Secondary SOR for 2H1OR stream + * NV0073_CTRL_DFP_SOR_TYPE_SINGLE + * Default Single SOR + * Note - sorType should only be referred to identify 2H1OR Primary and Secondary SOR + * + */ + +typedef struct NV0073_CTRL_DFP_ASSIGN_SOR_INFO { + NvU32 displayMask; + NvU32 sorType; +} NV0073_CTRL_DFP_ASSIGN_SOR_INFO; + +#define NV0073_CTRL_DFP_SOR_TYPE_NONE (0x00000000U) +#define NV0073_CTRL_DFP_SOR_TYPE_SINGLE (0x00000001U) +#define NV0073_CTRL_DFP_SOR_TYPE_2H1OR_PRIMARY (0x00000002U) +#define NV0073_CTRL_DFP_SOR_TYPE_2H1OR_SECONDARY (0x00000003U) + +/* + * NV0073_CTRL_CMD_DFP_ASSIGN_SOR + * + * This command is used by the clients to assign SOR to DFP for CROSS-BAR + * when the default SOR-DFP routing that comes from vbios is not considered. + * SOR shall be assigned to a DFP at the runtime. This call should be called + * before a modeset is done on any dfp display and also before LinkTraining for DP displays. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * DisplayId of the primary display for which SOR is to be assigned. However, if + * displayId is 0 then RM shall return the XBAR config it has stored in it's structures. + * sorExcludeMask + * sorMask of the SORs which should not be used for assignment. If this is 0, + * then SW is free to allocate any available SOR. + * slaveDisplayId + * displayId of the slave device in case of dualSST mode. This ctrl call will + * allocate SORs to both slave and the master if slaveDisplayId is set. + * forceSublinkConfig + * forces RM to configure primary or secondary sor sublink on the given diaplayId. + * If not set, then RM will do the default configurations. + * bIs2Head1Or + * Specifies that SOR allocation is required for 2 head 1 OR. This will allocate + * 2 SOR for same displayId - one Master and one Slave. Slave SOR would be disconnected + * from any padlink and get feedback clock from Master SOR's padlink. + * sorAssignList[NV0073_CTRL_CMD_DFP_ASSIGN_SOR_MAX_SORS] + * returns the displayMask for all SORs corresponding to their HW routings. + * sorAssignListWithTag[NV0073_CTRL_CMD_DFP_ASSIGN_SOR_MAX_SORS] + * returns the displayMask for all SORs corresponding to their HW routings along with + * SOR type to identify 2H1OR Primary and Secondary SORs. SOR type would be identified by + * NV0073_CTRL_DFP_SOR_TYPE. sorAssignList would look as below - + * sorAssignListWithTag[] = { DisplayMask, SOR Type + * {0x100, SECONDARY_SOR} + * {0x200, SINGLE_SOR} + * {0x100, PRIMARY_SOR} + * {0, NONE}} + * } + * Here, for display id = 0x100, SOR2 is Primary and SOR0 is Secondary. + * Note - sorAssignList parameter would be removed after Bug 200749158 is resolved + * reservedSorMask + * returns the sorMask reserved for the internal panels. + * flags + * Other detail settings. + * _AUDIO_OPTIMAL: Client requests trying to get audio SOR if possible. + * If there's no audio capable SOR and OD is HDMI/DP, + * RM will fail the control call. + * _AUDIO_DEFAULT: RM does not check audio-capability of SOR. + * + * _ACTIVE_SOR_NOT_AUDIO_CAPABLE_YES : RM returns Active SOR which is not Audio capable. + * _ACTIVE_SOR_NOT_AUDIO_CAPABLE_NO : RM is not returning 'Active non-audio capable SOR'. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + */ + + +#define NV0073_CTRL_CMD_DFP_ASSIGN_SOR (0x731152U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_ASSIGN_SOR_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_DFP_ASSIGN_SOR_MAX_SORS 4U + +#define NV0073_CTRL_DFP_ASSIGN_SOR_PARAMS_MESSAGE_ID (0x52U) + +typedef struct NV0073_CTRL_DFP_ASSIGN_SOR_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU8 sorExcludeMask; + NvU32 slaveDisplayId; + NV0073_CTRL_DFP_ASSIGN_SOR_LINKCONFIG forceSublinkConfig; + NvBool bIs2Head1Or; + NvU32 sorAssignList[NV0073_CTRL_CMD_DFP_ASSIGN_SOR_MAX_SORS]; + NV0073_CTRL_DFP_ASSIGN_SOR_INFO sorAssignListWithTag[NV0073_CTRL_CMD_DFP_ASSIGN_SOR_MAX_SORS]; + NvU8 reservedSorMask; + NvU32 flags; +} NV0073_CTRL_DFP_ASSIGN_SOR_PARAMS; + +#define NV0073_CTRL_DFP_ASSIGN_SOR_FLAGS_AUDIO 0:0 +#define NV0073_CTRL_DFP_ASSIGN_SOR_FLAGS_AUDIO_OPTIMAL (0x00000001U) +#define NV0073_CTRL_DFP_ASSIGN_SOR_FLAGS_AUDIO_DEFAULT (0x00000000U) +#define NV0073_CTRL_DFP_ASSIGN_SOR_FLAGS_ACTIVE_SOR_NOT_AUDIO_CAPABLE 1:1 +#define NV0073_CTRL_DFP_ASSIGN_SOR_FLAGS_ACTIVE_SOR_NOT_AUDIO_CAPABLE_NO (0x00000000U) +#define NV0073_CTRL_DFP_ASSIGN_SOR_FLAGS_ACTIVE_SOR_NOT_AUDIO_CAPABLE_YES (0x00000001U) + +/* +* NV0073_CTRL_CMD_DFP_GET_PADLINK_MASK +* +* This command will only be used by chipTB tests to get the padlinks corresponding +* to the given displayId. RM gets this information from vbios. This control call is +* only for verif purpose. +* +* subDeviceInstance +* This parameter specifies the subdevice instance within the +* NV04_DISPLAY_COMMON parent device to which the operation should be +* directed. This parameter must specify a value between zero and the +* total number of subdevices within the parent device. This parameter +* should be set to zero for default behavior. +* displayId +* DisplayId of the display for which the client needs analog link Mask +* padlinkMask +* analogLinkMask for the given displayId. This value returned is 0xffffffff if +* the given displayId is invalid else RM returns the corresponding padlinkMask. +* NV_OK +* NV_ERR_INVALID_ARGUMENT +* NV_ERR_NOT_SUPPORTED +*/ + + +#define NV0073_CTRL_CMD_DFP_GET_PADLINK_MASK (0x731153U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_GET_PADLINK_MASK_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_GET_PADLINK_MASK_PARAMS_MESSAGE_ID (0x53U) + +typedef struct NV0073_CTRL_DFP_GET_PADLINK_MASK_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 padlinkMask; +} NV0073_CTRL_DFP_GET_PADLINK_MASK_PARAMS; + +/* + * NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE + * This enum defines the functions that are supported for which a + * corresponding GPIO pin number could be retrieved + * Values copied from objgpio.h GPIO_FUNC_TYPE_LCD_*. Please keep the + * values in sync between the 2 files + */ + +typedef enum NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE { + // GPIO types of LCD GPIO functions common to all internal panels + NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE_LCD_BACKLIGHT = 268435456, + NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE_LCD_POWER = 285212672, + NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE_LCD_POWER_OK = 301989888, + NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE_LCD_SELF_TEST = 318767104, + NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE_LCD_LAMP_STATUS = 335544320, + NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE_LCD_BRIGHTNESS = 352321536, +} NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE; + +/* + * NV0073_CTRL_CMD_DFP_GET_LCD_GPIO_PIN_NUM + * + * This command can be used to get the GPIO pin number that corresponds to one + * of the LCD functions + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the ID of the dfp display. + * If more than one displayId bit is set or the displayId is not a dfp, + * this call will return NVOS_STATUS_ERROR_INVALID_ARGUMENT. + * funcType + * The LDC function for which the GPIO pin number is needed + * lcdGpioPinNum + * The GPIO pin number that corresponds to the LCD function. + * +*/ +#define NV0073_CTRL_CMD_DFP_GET_LCD_GPIO_PIN_NUM (0x731154U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_GET_LCD_GPIO_PIN_NUM_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_GET_LCD_GPIO_PIN_NUM_PARAMS_MESSAGE_ID (0x54U) + +typedef struct NV0073_CTRL_DFP_GET_LCD_GPIO_PIN_NUM_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NV0073_CTRL_CMD_DFP_LCD_GPIO_FUNC_TYPE funcType; + NvU32 lcdGpioPinNum; +} NV0073_CTRL_DFP_GET_LCD_GPIO_PIN_NUM_PARAMS; + + + +/* + * NV0073_CTRL_CMD_DFP_CONFIG_TWO_HEAD_ONE_OR + * + * This command is used for configuration of 2 head 1 OR. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * Display Id of the panel for which Two Head One OR is going to be used + * bEnable + * Enable/Disable 2 Head 1 OR + * masterSorIdx + * Master SOR Index which will send pixels to panel + * slaveSorIdx + * Slave SOR Index which will take feedback clock from Master SOR's + * padlink + * Possible status values returned are: + * NVOS_STATUS_SUCCESS + * NVOS_STATUS_ERROR_INVALID_ARGUMENT + * NVOS_STATUS_ERROR_NOT_SUPPORTED + */ + + +#define NV0073_CTRL_CMD_DFP_CONFIG_TWO_HEAD_ONE_OR (0x731156U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_CONFIG_TWO_HEAD_ONE_OR_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_CONFIG_TWO_HEAD_ONE_OR_PARAMS_MESSAGE_ID (0x56U) + +typedef struct NV0073_CTRL_DFP_CONFIG_TWO_HEAD_ONE_OR_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvBool bEnable; + NvU32 masterSorIdx; + NvU32 slaveSorIdx; +} NV0073_CTRL_DFP_CONFIG_TWO_HEAD_ONE_OR_PARAMS; + +/* + * NV0073_CTRL_CMD_DFP_DSC_CRC_CONTROL + * + * This command is used to enable/disable CRC on the GPU or query the registers + * related to it + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * headIndex + * index of the head + * cmd + * specifying if setup or querying is done + * bEnable + * enable or disable CRC on the GPU + * gpuCrc0 + * 0-indexed CRC register of the GPU + * gpuCrc1 + * 1-indexed CRC register of the GPU + * gpuCrc0 + * 2-indexed CRC register of the GPU + * Possible status values returned are: + * NVOS_STATUS_SUCCESS + * NVOS_STATUS_ERROR_NOT_SUPPORTED + */ + + +#define NV0073_CTRL_CMD_DFP_DSC_CRC_CONTROL (0x731157U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_DSC_CRC_CONTROL_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_DSC_CRC_CONTROL_PARAMS_MESSAGE_ID (0x57U) + +typedef struct NV0073_CTRL_DFP_DSC_CRC_CONTROL_PARAMS { + NvU32 subDeviceInstance; + NvU32 headIndex; + NvU32 cmd; + NvBool bEnable; + NvU16 gpuCrc0; + NvU16 gpuCrc1; + NvU16 gpuCrc2; +} NV0073_CTRL_DFP_DSC_CRC_CONTROL_PARAMS; + +#define NV0073_CTRL_DP_CRC_CONTROL_CMD 0:0 +#define NV0073_CTRL_DP_CRC_CONTROL_CMD_SETUP (0x00000000U) +#define NV0073_CTRL_DP_CRC_CONTROL_CMD_QUERY (0x00000001U) + +/* + * NV0073_CTRL_CMD_DFP_INIT_MUX_DATA + * + * This control call is used to configure the display MUX related data + * for the given display device. Clients to RM are expected to call this + * control call to initialize the data related to MUX before any MUX related + * operations such mux switch or PSR entry/ exit are performed. + * + * subDeviceInstance (in) + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * displayId (in) + * ID of the display device for which the mux state has to be initialized + * manfId (in) + * Specifies the manufacturer ID of panel obtained from the EDID. This + * parameter is expected to be non-zero only in case of internal panel. + * productId (in) + * Specifies the product ID of panel obtained from the EDID. This + * parameter is expected to be non-zero only in case of internal panel. + * tconId (out) + * RM provides an enumerated TCON specific value to help the client + * identify the panel TCON. Clients can refer to the enum from sdk/nvidia/inc/dds_tcon_db.h + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + */ + +#define NV0073_CTRL_CMD_DFP_INIT_MUX_DATA (0x731158U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_DFP_INIT_MUX_DATA_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_DFP_INIT_MUX_DATA_PARAMS_MESSAGE_ID (0x58U) + +typedef struct NV0073_CTRL_CMD_DFP_INIT_MUX_DATA_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU16 manfId; + NvU16 productId; + NvU16 tconId; +} NV0073_CTRL_CMD_DFP_INIT_MUX_DATA_PARAMS; + + + +/* + * NV0073_CTRL_CMD_DFP_SWITCH_DISP_MUX + * + * This command is used to switch the dynamic display mux between + * integrated GPU and discrete GPU. + * + * subDeviceInstance (in) + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * displayId (in) + * ID of the display device for which the display MUX has to be switched + * flags (in) + * Flags indicating the action to be performed. Here are the possible + * valid values- + * NV0073_CTRL_DFP_DISP_MUX_SWITCH_IGPU_TO_DGPU + * When set mux is switched from integrated to discrete GPU. + * NV0073_CTRL_DFP_DISP_MUX_SWITCH_DGPU_TO_IGPU + * When set mux is switched from discrete to integrated GPU. + * NV0073_CTRL_DFP_DISP_MUX_SWITCH_SKIP_SIDEBAND_ACCESS + * Set to true for PSR panels as we skip sideband access. + * auxSettleDelay (in) + * Time, in milliseconds, necessary for AUX channel to settle and become + * accessible after a mux switch. Set to zero to use the default delay. + * muxSwitchLatencyMs (out) + * mux switch latency stats in milli-seconds + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + */ + +#define NV0073_CTRL_CMD_DFP_SWITCH_DISP_MUX (0x731160U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_DFP_SWITCH_DISP_MUX_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_DFP_SWITCH_DISP_MUX_PARAMS_MESSAGE_ID (0x60U) + +typedef struct NV0073_CTRL_CMD_DFP_SWITCH_DISP_MUX_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 flags; + NvU32 auxSettleDelay; + NvU32 muxSwitchLatencyMs; +} NV0073_CTRL_CMD_DFP_SWITCH_DISP_MUX_PARAMS; + +/* valid flags*/ +#define NV0073_CTRL_DFP_DISP_MUX_SWITCH 0:0 +#define NV0073_CTRL_DFP_DISP_MUX_SWITCH_IGPU_TO_DGPU 0x00000000 +#define NV0073_CTRL_DFP_DISP_MUX_SWITCH_DGPU_TO_IGPU 0x00000001 +#define NV0073_CTRL_DFP_DISP_MUX_SWITCH_SKIP_SIDEBAND_ACCESS 1:1 +#define NV0073_CTRL_DFP_DISP_MUX_SWITCH_SKIP_SIDEBAND_ACCESS_YES 0x00000001 +#define NV0073_CTRL_DFP_DISP_MUX_SWITCH_SKIP_SIDEBAND_ACCESS_NO 0x00000000 + +/* + * NV0073_CTRL_CMD_DFP_RUN_PRE_DISP_MUX_OPERATIONS + * + * This command is used to perform all the operations that need to be + * performed before a mux switch is started. + * + * subDeviceInstance (in) + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * displayId (in) + * ID of the display device for which the pre mux switch operations have + * to be performed. + * flags (in) + * Flags indicating the action to be performed. Here are the possible + * valid values - + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_SWITCH_TYPE_IGPU_TO_DGPU + * Indicates a switch from i to d is initiated + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_SWITCH_TYPE_DGPU_TO_IGPU + * Indicates a switch from d to i is initiated + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_ENTER_SKIP_NO + * When set RM will execute the PSR enter sequence. By default RM will + * not skip SR enter sequence + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_ENTER_SKIP_YES + * When set RM will skip the PSR enter sequence + * iGpuBrightness (in) + * iGPU brightness value (scale 0~100) before switching mux from I2D. + * This is used to match brightness after switching mux to dGPU + * preOpsLatencyMs (out) + * premux switch operations latency stats in milli-seconds. This includes - + * - disabling SOR sequencer and enable BL GPIO control + * - toggling LCD VDD, BL EN and PWM MUX GPIOs + * - PSR entry, if not skipped + * psrEntryLatencyMs (out) + * psr entry latency stats in milli-seconds + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + */ + +#define NV0073_CTRL_CMD_DFP_RUN_PRE_DISP_MUX_OPERATIONS (0x731161U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_DFP_RUN_PRE_DISP_MUX_OPERATIONS_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_DFP_RUN_PRE_DISP_MUX_OPERATIONS_PARAMS_MESSAGE_ID (0x61U) + +typedef struct NV0073_CTRL_CMD_DFP_RUN_PRE_DISP_MUX_OPERATIONS_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 flags; + NvU32 iGpuBrightness; + NvU32 preOpsLatencyMs; + NvU32 psrEntryLatencyMs; +} NV0073_CTRL_CMD_DFP_RUN_PRE_DISP_MUX_OPERATIONS_PARAMS; + +/* valid flags*/ +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SWITCH_TYPE 0:0 +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SWITCH_TYPE_IGPU_TO_DGPU 0x00000000U +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SWITCH_TYPE_DGPU_TO_IGPU 0x00000001U +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_ENTER_SKIP 1:1 +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_ENTER_SKIP_NO 0x00000000U +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_ENTER_SKIP_YES 0x00000001U +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_MUX_SWITCH_IGPU_POWER_TIMING 2:2 +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_MUX_SWITCH_IGPU_POWER_TIMING_KNOWN 0x00000000 +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_MUX_SWITCH_IGPU_POWER_TIMING_UNKNOWN 0x00000001 +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SKIP_BACKLIGHT_ENABLE 3:3 +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SKIP_BACKLIGHT_ENABLE_NO 0x00000000U +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SKIP_BACKLIGHT_ENABLE_YES 0x00000001U + +#define NV0073_CTRL_DISP_MUX_BACKLIGHT_BRIGHTNESS_MIN 0U +#define NV0073_CTRL_DISP_MUX_BACKLIGHT_BRIGHTNESS_MAX 100U + +/* + * NV0073_CTRL_CMD_DFP_RUN_POST_DISP_MUX_OPERATIONS + * + * This command is used to perform all the operations that need to be + * performed after a successful mux switch is completed. + * + * subDeviceInstance (in) + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * displayId (in) + * ID of the display device for which the post mux switch operations have + * to be performed. + * flags (in) + * Flags indicating the action to be performed. Here are the possible + * valid values - + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_SWITCH_TYPE_IGPU_TO_DGPU + * Indicates a switch from i to d is initiated + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_SWITCH_TYPE_DGPU_TO_IGPU + * Indicates a switch from d to i is initiated + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_EXIT_SKIP_NO + * When set RM will execute the PSR exit sequence. By default RM will + * not skip SR exit sequence + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_EXIT_SKIP_YES + * When set RM will skip the PSR exit sequence + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_MUX_SWITCH_IGPU_POWER_TIMING_KNOWN + * Indicates mux switches where we know when igpu powers up + * NV0073_CTRL_DFP_DISP_MUX_FLAGS_MUX_SWITCH_IGPU_POWER_TIMING_UNKNOWN + * Indicates mux switches where we don't know when igpu powers up + * postOpsLatencyMs (out) + * postmux switch operations latency stats in milli-seconds. This includes - + * - restoring SOR sequencer and BL GPIO control + * - toggling LCD VDD, BL EN and PWM MUX GPIOs + * - PSR exit, if not skipped + * psrExitLatencyMs (out) + * psr exit latency stats in milli-seconds + * psrExitTransitionToInactiveLatencyMs (out) + * psr exit latency stats in milli-seconds, from state 2 (SR active) to state 4 (transition to inactive) + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + * NV_ERR_TIMEOUT in case of SR exit failure + */ + +#define NV0073_CTRL_CMD_DFP_RUN_POST_DISP_MUX_OPERATIONS (0x731162U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_DFP_RUN_POST_DISP_MUX_OPERATIONS_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_DFP_RUN_POST_DISP_MUX_OPERATIONS_PARAMS_MESSAGE_ID (0x62U) + +typedef struct NV0073_CTRL_CMD_DFP_RUN_POST_DISP_MUX_OPERATIONS_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 flags; + NvU32 postOpsLatencyMs; + NvU32 psrExitLatencyMs; + NvU32 psrExitTransitionToInactiveLatencyMs; +} NV0073_CTRL_CMD_DFP_RUN_POST_DISP_MUX_OPERATIONS_PARAMS; + +/* valid flags*/ +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SWITCH_TYPE 0:0 +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_EXIT_SKIP 1:1 +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_EXIT_SKIP_NO 0x00000000U +#define NV0073_CTRL_DFP_DISP_MUX_FLAGS_SR_EXIT_SKIP_YES 0x00000001U + +/* + * NV0073_CTRL_CMD_DFP_GET_DISP_MUX_STATUS + * + * This command is used to query the display mux status for the given + * display device + * + * subDeviceInstance (in) + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * displayId (in) + * ID of the display device for which the post mux switch operations have + * to be performed. + * muxStatus (out) + * status indicating the current state of the mux. + * valid values - + * NV0073_CTRL_DFP_DISP_MUX_STATE_INTEGRATED_GPU + * Indicates that the MUX is currently switched to integrated GPU. + * NV0073_CTRL_DFP_DISP_MUX_STATE_DISCRETE_GPU + * Indicates that the MUX is currently switched to discrete GPU. + * NV0073_CTRL_DFP_DISP_MUX_MODE_DISCRETE_ONLY + * Indicates that the MUX mode is set to discrete mode, where all displays + * are driven by discrete GPU. + * NV0073_CTRL_DFP_DISP_MUX_MODE_INTEGRATED_ONLY + * Indicates that the MUX mode is set to integrated mode, where all + * displays are driven by Integrated GPU. + * NV0073_CTRL_DFP_DISP_MUX_MODE_HYBRID + * Indicates that the MUX mode is set to hybrid, where internal panel is + * driven by integrated GPU, while external displays might be driven by + * discrete GPU. + * NV0073_CTRL_DFP_DISP_MUX_MODE_DYNAMIC + * Indicates that the MUX mode is dynamic. It is only in this mode, the + * display MUX can be toggled between discrete and hybrid dynamically. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + */ + +#define NV0073_CTRL_CMD_DFP_GET_DISP_MUX_STATUS (0x731163U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_DFP_GET_DISP_MUX_STATUS_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_DFP_GET_DISP_MUX_STATUS_PARAMS_MESSAGE_ID (0x63U) + +typedef struct NV0073_CTRL_CMD_DFP_GET_DISP_MUX_STATUS_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 muxStatus; +} NV0073_CTRL_CMD_DFP_GET_DISP_MUX_STATUS_PARAMS; + +/* valid flags */ +#define NV0073_CTRL_DFP_DISP_MUX_STATE 1:0 +#define NV0073_CTRL_DFP_DISP_MUX_STATE_INVALID 0x00000000U +#define NV0073_CTRL_DFP_DISP_MUX_STATE_INTEGRATED_GPU 0x00000001U +#define NV0073_CTRL_DFP_DISP_MUX_STATE_DISCRETE_GPU 0x00000002U +#define NV0073_CTRL_DFP_DISP_MUX_MODE 4:2 +#define NV0073_CTRL_DFP_DISP_MUX_MODE_INVALID 0x00000000U +#define NV0073_CTRL_DFP_DISP_MUX_MODE_INTEGRATED_ONLY 0x00000001U +#define NV0073_CTRL_DFP_DISP_MUX_MODE_DISCRETE_ONLY 0x00000002U +#define NV0073_CTRL_DFP_DISP_MUX_MODE_HYBRID 0x00000003U +#define NV0073_CTRL_DFP_DISP_MUX_MODE_DYNAMIC 0x00000004U + + + +/* +* NV0073_CTRL_CMD_DFP_GET_DSI_MODE_TIMING +* +* This command can be used to get DSI mode timing parameters. +* +* subDeviceInstance +* This parameter specifies the subdevice instance within the +* NV04_DISPLAY_COMMON parent device to which the operation should be +* directed. This parameter must specify a value between zero and the +* total number of subdevices within the parent device. This parameter +* should be set to zero for default behavior. +* displayId +* This parameter specifies the ID of the display on which the DSI +* info will be set. The display ID must be a DSI-capable display. +* hActive +* This parameter specifies the horizontal length of the active pixel +* data in the raster. +* vActive +* This parameter specifies the vertical lines of the active pixel +* data in the raster. +* hFrontPorch +* This parameter specifies the number of horizontal front porch +* blanking pixels in the raster. +* vFrontPorch +* This parameter specifies the numer of lines of the vertical front +* porch in the raster. +* hBackPorch +* This parameter specifies the number of horizontal back porch +* blanking pixels in the raster. +* vBackPorch +* This parameter specifies the numer of lines of the vertical back +* porch in the raster. +* hSyncWidth +* This parameter specifies the number of horizontal sync pixels in +* the raster. +* vSyncWidth +* This parameter specifies the numer of lines of the vertical sync +* in the raster. +* bpp +* This parameter specifies the depth (Bits per Pixel) of the output +* display stream. +* refresh +* This parameter specifies the refresh rate of the panel (in Hz). +* pclkHz +* This parameter specifies the pixel clock rate in Hz. +* numLanes +* Number of DSI data lanes. +* dscEnable +* Flag to indicate if DSC an be enabled, which in turn indicates if +* panel supports DSC. +* dscBpp +* DSC Bits per pixel +* dscNumSlices +* Number of slices for DSC. +* dscDuaDsc +* Flag to indicate if panel supports DSC streams from two DSI +* controllers. +* dscSliceHeight +* Height of DSC slices. +* dscBlockPrediction +* Flag to indicate if DSC Block Prediction needs to be enabled. +* dscDecoderVersionMajor +* Major version number of DSC decoder on Panel. +* dscDecoderVersionMinor +* Minor version number of DSC decoder on Panel. +* dscUseCustomPPS +* Flag to indicate if Panel uses custom PPS values which deviate from standard values. +* dscCustomPPSData +* 32 bytes of custom PPS data required by Panel. +* dscEncoderCaps +* Capabilities of DSC encoder in SoC. +* +* Possible status values returned are: +* NV_OK +* NV_ERR_INVALID_ARGUMENT +* NV_ERR_NOT_SUPPORTED +*/ + +#define NV0073_CTRL_CMD_DFP_GET_DSI_MODE_TIMING (0x731166U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_DFP_GET_DSI_MODE_TIMING_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_DFP_DSI_CUSTOM_PPS_DATA_COUNT 32U + +#define NV0073_CTRL_CMD_DFP_GET_DSI_MODE_TIMING_PARAMS_MESSAGE_ID (0x66U) + +typedef struct NV0073_CTRL_CMD_DFP_GET_DSI_MODE_TIMING_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 hActive; + NvU32 vActive; + NvU32 hFrontPorch; + NvU32 vFrontPorch; + NvU32 hBackPorch; + NvU32 vBackPorch; + NvU32 hSyncWidth; + NvU32 vSyncWidth; + NvU32 bpp; + NvU32 refresh; + NvU32 pclkHz; + NvU32 numLanes; + NvU32 dscEnable; + NvU32 dscBpp; + NvU32 dscNumSlices; + NvU32 dscDualDsc; + NvU32 dscSliceHeight; + NvU32 dscBlockPrediction; + NvU32 dscDecoderVersionMajor; + NvU32 dscDecoderVersionMinor; + NvBool dscUseCustomPPS; + NvU32 dscCustomPPSData[NV0073_CTRL_CMD_DFP_DSI_CUSTOM_PPS_DATA_COUNT]; + NV0073_CTRL_CMD_DSC_CAP_PARAMS dscEncoderCaps; +} NV0073_CTRL_CMD_DFP_GET_DSI_MODE_TIMING_PARAMS; + + + +/* + * NV0073_CTRL_CMD_DFP_GET_FIXED_MODE_TIMING + * + * This control call is used to retrieve the display mode timing info that's + * specified for a given DFP from an offline configuration blob (e.g., Device Tree). + * This display timing info is intended to replace the timings exposed in a + * sink's EDID. + * + * subDeviceInstance (in) + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. + * displayId (in) + * ID of the display device for which the timings should be retrieved. + * stream (in) + * For MST connectors with static topologies (e.g., DP serializers), + * this parameter further identifies the video stream for which the + * timings should be retrieved. + * valid (out) + * Indicates whether a valid display timing was found for this DFP. + * hActive (out) + * Horizontal active width in pixels + * hFrontPorch (out) + * Horizontal front porch + * hSyncWidth (out) + * Horizontal sync width + * hBackPorch (out) + * Horizontal back porch + * vActive (out) + * Vertical active height in lines + * vFrontPorch (out) + * Vertical front porch + * vSyncWidth (out) + * Vertical sync width + * vBackPorch (out) + * Vertical back porch + * pclkKHz (out) + * Pixel clock frequency in KHz + * rrx1k (out) + * Refresh rate in units of 0.001Hz +* x (out) +* x offset inside superframe at which this view starts + * y (out) +* y offset inside superframe at which this view starts + * width (out) +* Horizontal active width in pixels for this view +* height (out) +* Vertical active height in lines for this view + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + */ +#define NV0073_CTRL_CMD_DFP_GET_FIXED_MODE_TIMING (0x731172) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8 | NV0073_CTRL_DFP_GET_FIXED_MODE_TIMING_PARAMS_MESSAGE_ID)" */ + +#define NV0073_CTRL_DFP_FIXED_MODE_TIMING_MAX_SUPERFRAME_VIEWS 4U + +#define NV0073_CTRL_DFP_GET_FIXED_MODE_TIMING_PARAMS_MESSAGE_ID (0x72U) + +typedef struct NV0073_CTRL_DFP_GET_FIXED_MODE_TIMING_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU8 stream; + + NvBool valid; + + NvU16 hActive; + NvU16 hFrontPorch; + NvU16 hSyncWidth; + NvU16 hBackPorch; + + NvU16 vActive; + NvU16 vFrontPorch; + NvU16 vSyncWidth; + NvU16 vBackPorch; + + NvU32 pclkKHz; + NvU32 rrx1k; + + struct { + NvU8 numViews; + struct { + NvU16 x; + NvU16 y; + NvU16 width; + NvU16 height; + } view[NV0073_CTRL_DFP_FIXED_MODE_TIMING_MAX_SUPERFRAME_VIEWS]; + } superframeInfo; +} NV0073_CTRL_DFP_GET_FIXED_MODE_TIMING_PARAMS; + + + +/* + * NV0073_CTRL_DFP_ENTER_DISPLAY_POWER_GATING_DIAGNOSTIC_DATA + * + * This structure describes diagnostic information about display power + * gating entry sequence + * + * totalRmEntryLatencyUs + * Duration in microseconds that RM took to service 'Enter + * Display Power Gating' command. This includes time for all + * steps that RM performs as part of display power gating entry + * sequence including the below parameters. + * hwOkToGateLatencyUs + * Duration in microseconds that HW took to assert ok_to_gate. + * Only valid when displayId is not equal to 0xFFFFFFFF + * carApiLatencyUs + * Duration in microseconds that CAR (Clock and Reset) block took to + * service 'Enter Display Power Gating' command + * + */ + +typedef struct NV0073_CTRL_DFP_ENTER_DISPLAY_POWER_GATING_DIAGNOSTIC_DATA { + NvU32 totalRmEntryLatencyUs; + NvU32 hwOkToGateLatencyUs; + NvU32 carEntryApiLatencyUs; +} NV0073_CTRL_DFP_ENTER_DISPLAY_POWER_GATING_DIAGNOSTIC_DATA; + +/* + * NV0073_CTRL_CMD_DFP_ENTER_DISPLAY_POWER_GATING + * + * This command can be used to enter display power gating with an option to + * save-restore settings for the specified displayId. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * displayId + * This parameter specifies the ID of the display for which the state + * needs to be saved-restored during exit of Display Power Gating. + * The display ID must be a dfp display as determined with the + * NV0073_CTRL_CMD_SPECIFIC_GET_TYPE command. If more than one + * displayId bit is set or the displayId is not a dfp, this call will + * return NV_ERR_INVALID_ARGUMENT. For the case where no save-restore + * is needed, displayId should be set to 0xFFFFFFFF. + * flags + * This parameter specifies special request from client for RM(for future use) + * diagnosticData + * This parameter provides diagnostic information about display power + * gating entry sequence + * + * Possible status values returned are: + * NV_OK - If Display Power Gating Entry was successful + * NV_ERR_GENERIC - If Display Power Gating Entry failed + * NV_ERR_INVALID_ARGUMENT - If incorrect parameters are sent + */ +#define NV0073_CTRL_CMD_DFP_ENTER_DISPLAY_POWER_GATING (0x731174U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_DFP_ENTER_DISPLAY_POWER_GATING_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_DFP_ENTER_DISPLAY_POWER_GATING_PARAMS_MESSAGE_ID (0x74U) + +typedef struct NV0073_CTRL_CMD_DFP_ENTER_DISPLAY_POWER_GATING_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; + NvU32 flag; + NV0073_CTRL_DFP_ENTER_DISPLAY_POWER_GATING_DIAGNOSTIC_DATA diagnosticData; +} NV0073_CTRL_CMD_DFP_ENTER_DISPLAY_POWER_GATING_PARAMS; + +#define NV0073_CTRL_DFP_ENTER_DISPLAY_POWER_GATING_FLAGS_RESERVED 31:0 +#define NV0073_CTRL_DFP_ENTER_DISPLAY_POWER_GATING_FLAGS_RESERVED_INIT (0x00000000U) + +/* + * NV0073_CTRL_DFP_EXIT_DISPLAY_POWER_GATING_DIAGNOSTIC_DATA + * + * This structure describes diagnostic information about display power + * gating exit sequence + * + * totalRmExitLatencyUs + * Duration in microseconds that RM took to service 'Exit + * Display Power Gating' command. This includes time for all + * steps that RM performs as part of display power gating exit + * sequence including the below parameters. + * riscvBootupLatencyUs + * Duration in microseconds that LTM RISCV took to bootup. + * carExitApiLatencyUs + * Duration in microseconds that CAR (Clock and Reset) block took + * to service 'Exit Display Power Gating' command + * + */ +typedef struct NV0073_CTRL_DFP_EXIT_DISPLAY_POWER_GATING_DIAGNOSTIC_DATA { + NvU32 totalRmExitLatencyUs; + NvU32 riscvBootupLatencyUs; + NvU32 carExitApiLatencyUs; +} NV0073_CTRL_DFP_EXIT_DISPLAY_POWER_GATING_DIAGNOSTIC_DATA; + +/* + * NV0073_CTRL_CMD_DFP_EXIT_DISPLAY_POWER_GATING + * + * This command can be used to exit display power gating. If preceding + * NV0073_CTRL_CMD_DFP_ENTER_DISPLAY_POWER_GATING command requested for + * save-restore of settings for a particular displayId then this command + * will restore settings for that displayId. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * flags + * This parameter specifies special request from client for RM(for future use) + * diagnosticData + * This parameter provides diagnostic information about display power + * gating exit sequence + * + * Possible status values returned are: + * NV_OK - When Display Power Gating Exit was successful + * NV_ERR_GENERIC - When Display Power Gating Exit failed + * NV_ERR_INVALID_ARGUMENT - When incorrect parameters are sent + */ + +#define NV0073_CTRL_CMD_DFP_EXIT_DISPLAY_POWER_GATING (0x731175U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_DFP_EXIT_DISPLAY_POWER_GATING_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_DFP_EXIT_DISPLAY_POWER_GATING_PARAMS_MESSAGE_ID (0x75U) + +typedef struct NV0073_CTRL_CMD_DFP_EXIT_DISPLAY_POWER_GATING_PARAMS { + NvU32 subDeviceInstance; + NvU32 flag; + NV0073_CTRL_DFP_EXIT_DISPLAY_POWER_GATING_DIAGNOSTIC_DATA diagnosticData; +} NV0073_CTRL_CMD_DFP_EXIT_DISPLAY_POWER_GATING_PARAMS; + +#define NV0073_CTRL_DFP_EXIT_DISPLAY_POWER_GATING_FLAGS_RESERVED 31:0 +#define NV0073_CTRL_DFP_EXIT_DISPLAY_POWER_GATING_FLAGS_RESERVED_INIT (0x00000000U) + +/* + * NV0073_CTRL_CMD_DFP_EDP_DRIVER_UNLOAD + * + * This command is called when we want to inform RM of driver + * unload. + * + * subDeviceInstance (in) + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation + * should be directed. + * displayId (in) + * This parameter inputs the displayId of the active display. A value + * of zero indicates no display is active. + * + * Possible status values returned are: + * NV_OK + * NV_ERR_INVALID_PARAM_STRUCT + * NV_ERR_INVALID_ARGUMENT + * NV_ERR_NOT_SUPPORTED + */ +#define NV0073_CTRL_CMD_DFP_EDP_DRIVER_UNLOAD (0x731176U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_EDP_DRIVER_UNLOAD_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_EDP_DRIVER_UNLOAD_PARAMS_MESSAGE_ID (0x76U) + +typedef struct NV0073_CTRL_DFP_EDP_DRIVER_UNLOAD_PARAMS { + NvU32 subDeviceInstance; + NvU32 displayId; +} NV0073_CTRL_DFP_EDP_DRIVER_UNLOAD_PARAMS; + +/* + * NV0073_CTRL_CMD_SYSTEM_SET_REGION_RAM_RECTANGLES + * + * @brief + * This command can be used to program the Rectangle regions info into + * Region RAM. These Rectangle regions are then used as regions of interest + * for Tell Tale and Frozen Frame detection. + * + * Some NVDisplay hardware has an internal RAM to support TellTale(TT) + * and Frozen Frame(FF) features. Each entry in this RAM is simply defined + * as a rectangle (x/y position, width and height). RM will load the region + * RAM with rectangle entries using PDISP registers. + * + * Several new Core/Window methods have been added. These methods can be + * programmed to specify which rectangle resources would be enabled and inform + * hw to start using for TT/FF checking. There are also methods that can be used + * to configure the manner of checking (e.g., for frozen frame detection, how + * many regions need to be frozen for how many frames before it's considered as + * a fault). As part of these methods, need to specify the index of the region + * RAM entry (rectangle) that needs to be checked. This ID is already specified + * for each rectangle as part of the info that was programmed by RM to Region RAM. + * + * The rectangles loaded onto Region RAM are not specifically tied to the current + * mode, and do not have to be coupled with only one single mode. Based on the + * current raster size, it is expected that the RM clients would choose the + * Rectangles that are within the raster size. Once TT/FF checking is enabled, + * Display HW continuously checks and will raise an interrupt event if detects an + * error case. If a rectangle resource is chosen that "doesn't fit" the current + * raster size, overlaps with another rectangle resource, etc, then HW will + * generate an exception for these invalid states. + * + * @params + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * numRectangles + * This parameter specifies the number of rectangles whose region info + * has been passed as part of this control call + * rectanglesInfo::rectangleID + * This parameter provides the ID of the rectangle which will be used + * to identify the rectangle during methods programming for TellTale + * or Frozen Frame detection. + * rectanglesInfo::xCoordinate + * This parameter specifies the x-coordinate of the top left corner of + * the rectangle in the viewport. + * rectanglesInfo::yCoordinate + * This parameter specifies the y-coordinate of the top left corner of + * the rectangle in the viewport. + * rectanglesInfo::width + * This parameter specifies the width of the rectangle. + * rectanglesInfo::height + * This parameter specifies the height of the rectangle. + * + * Possible status values returned are: + * NV_OK - Upon successfully programming Rectangles info to Region RAM + * NV_ERR_INVALID_ARGUMENT - When incorrect values are passed in arguments + */ +#define NV0073_CTRL_CMD_SYSTEM_SET_REGION_RAM_RECTANGLES (0x731177U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_SYSTEM_SET_REGION_RAM_RECTANGLES_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_CMD_SYSTEM_MAX_REGION_RAM_RECTANGLES 16U + +#define NV0073_CTRL_CMD_SYSTEM_SET_REGION_RAM_RECTANGLES_PARAMS_MESSAGE_ID (0x77U) + +typedef struct NV0073_CTRL_CMD_SYSTEM_SET_REGION_RAM_RECTANGLES_PARAMS { + NvU32 subDeviceInstance; + NvU8 numRectangles; + + struct { + NvU8 rectangleID; + NvU16 xCoordinate; + NvU16 yCoordinate; + NvU16 width; + NvU16 height; + } rectanglesInfo[NV0073_CTRL_CMD_SYSTEM_MAX_REGION_RAM_RECTANGLES]; +} NV0073_CTRL_CMD_SYSTEM_SET_REGION_RAM_RECTANGLES_PARAMS; + +/* + * NV0073_CTRL_CMD_SYSTEM_CONFIGURE_SAFETY_INTERRUPTS + * + * This command can be used to set the interrupt handling mechanism (One-time + * or Continuous) of TellTale and FrozenFrame/Overlap events. Also, this command + * can be used to Enable/Disable the safety interrupts. + * + * subDeviceInstance + * This parameter specifies the subdevice instance within the + * NV04_DISPLAY_COMMON parent device to which the operation should be + * directed. This parameter must specify a value between zero and the + * total number of subdevices within the parent device. This parameter + * should be set to zero for default behavior. + * tellTaleEvents + * The 'mode' variable holds the interrupt configuration values for + * TellTale events. Clients can specify whether the interrupt needs to + * be Disabled or Enabled Continuously or Enabled Only Once using the + * NV0073_CTRL_CMD_SYSTEM_SAFETY_INTERRUPT_MODE_* macros. ENABLE_ONLY_ONCE + * helps avoid interrupt storm by disabling the interrupt after the first + * event since Safety Interrupts are generated per frame. + * The 'specified' field should be used to specify if the 'mode' value at + * that index should be programmed as part of the control call handling + * function. This helps if Clients don't want to update the TellTale + * interrupt configuration of a particular tile in this instance of the + * control call invocation. If it is set to NV_TRUE, the 'mode' value + * will be programmed. If NV_FALSE, 'mode' value will not be programmed. + * frozenFrameEvents + * The 'mode' variable holds the interrupt configuration values for + * FrozenFrame events. Clients can specify whether the interrupt needs to + * be Disabled or Enabled Continuously or Enabled Only Once using the + * NV0073_CTRL_CMD_SYSTEM_SAFETY_INTERRUPT_MODE_* macros. ENABLE_ONLY_ONCE + * helps avoid interrupt storm by disabling the interrupt after the first + * event since Safety Interrupts are generated per frame. + * The 'specified' field should be used to specify if the 'mode' value at + * that index should be programmed as part of the control call handling + * function. This helps if Clients don't want to update the Frozen Frame + * interrupt configuration of a particular head in this instance of the + * control call invocation. If it is set to NV_TRUE, the 'mode' value + * will be programmed. If NV_FALSE, 'mode' value will not be programmed. + * overlapEvents + * The 'mode' variable holds the interrupt configuration values for + * Overlap events. Clients can specify whether the interrupt needs to + * be Disabled or Enabled Continuously or Enabled Only Once using the + * NV0073_CTRL_CMD_SYSTEM_SAFETY_INTERRUPT_MODE_* macros. ENABLE_ONLY_ONCE + * helps avoid interrupt storm by disabling the interrupt after the first + * event since Safety Interrupts are generated per frame. + * The 'specified' field should be used to specify if the 'mode' value at + * that index should be programmed as part of the control call handling + * function. This helps if Clients don't want to update the Overlap + * interrupt configuration of a particular tile in this instance of the + * control call invocation. If it is set to NV_TRUE, the 'mode' value + * will be programmed. If NV_FALSE, 'mode' value will not be programmed. + */ +/* + * NOTE: Though we have created tellTaleEvents, frozenFrameEvents and overlapEvents structs as + * arrays holding interrupt 'mode' for each Head/Tile, RM currently does not support + * configuring these interrupts per Head/Tile. This support is planned to be added in RM + * sometime later, but having the structures per Head/Tile helps in future-proofing the + * control call interface. + * Expectation from the clients is to set the same 'mode' value at all the indexes (for + * all Heads/Tiles). This specified 'mode' value will be globally applied for all + Heads/Tiles for now. + */ +#define NV0073_CTRL_CMD_SYSTEM_CONFIGURE_SAFETY_INTERRUPTS (0x731178U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_CMD_SYSTEM_CONFIGURE_SAFETY_INTERRUPTS_PARAMS_MESSAGE_ID" */ + +/* + * Interrupt configuration values for Safety events + */ +#define NV0073_CTRL_CMD_SYSTEM_SAFETY_INTERRUPT_MODE_DISABLE 0U +#define NV0073_CTRL_CMD_SYSTEM_SAFETY_INTERRUPT_MODE_ENABLE_CONTINUOUS 1U +#define NV0073_CTRL_CMD_SYSTEM_SAFETY_INTERRUPT_MODE_ENABLE_ONLY_ONCE 2U +#define NV0073_CTRL_CMD_SYSTEM_SAFETY_INTERRUPT_MODE_RESERVED 3U + +/* + * Head and Tile count used to specify Safety interrupt configuration for each head/tile. + */ +#define NV0073_CTRL_CMD_SYSTEM_MAX_SAFETY_HEAD_COUNT 8U +#define NV0073_CTRL_CMD_SYSTEM_MAX_SAFETY_TILE_COUNT 8U + +#define NV0073_CTRL_CMD_SYSTEM_CONFIGURE_SAFETY_INTERRUPTS_PARAMS_MESSAGE_ID (0x78U) + +typedef struct NV0073_CTRL_CMD_SYSTEM_CONFIGURE_SAFETY_INTERRUPTS_PARAMS { + NvU32 subDeviceInstance; + + struct { + NvU8 mode; + NvBool specified; + } tellTaleEvents[NV0073_CTRL_CMD_SYSTEM_MAX_SAFETY_TILE_COUNT]; + + struct { + NvU8 mode; + NvBool specified; + } frozenFrameEvents[NV0073_CTRL_CMD_SYSTEM_MAX_SAFETY_HEAD_COUNT]; + + struct { + NvU8 mode; + NvBool specified; + } overlapEvents[NV0073_CTRL_CMD_SYSTEM_MAX_SAFETY_TILE_COUNT]; +} NV0073_CTRL_CMD_SYSTEM_CONFIGURE_SAFETY_INTERRUPTS_PARAMS; + +/* + * NV0073_CTRL_CMD_DFP_GET_DISP_PHY_INFO + * + * Return a high-level DISP PHY description that is independent of raw register + * encodings. Tools or firmware can use the information to reason about link + * routing and data-rate policy, etc. + * + * Parameters + * subDeviceInstance (in) + * Sub-device instance within NV04_DISPLAY_COMMON. + * + * edpClkSrc (out) enum NV0073_CTRL_DFP_DISP_PHY_EDP_CLK_SRC + * edpPllFreq (out) enum NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_SEL + * + * padLink[4] (out) One entry per DP Pad-Link (DP0...DP3): + * sorSel enum NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL + * mode enum NV0073_CTRL_DFP_DISP_PHY_TYPEC_MODE + * cableOrient enum NV0073_CTRL_DFP_DISP_PHY_CABLE_ORIENT + * modeStatusDone NvBool (Alt-mode exit / entry finished) + * safeMode enum NV0073_CTRL_DFP_DISP_PHY_TYPEC_SAFE_MODE + * + * tpllForceVal enum NV0073_CTRL_DFP_DISP_PHY_TPLL_FORCE_VAL + * tpllForceEn NvBool (DA_XTP_LN_TPLL_SEL[16]) + * pllPwrSeqEn NvBool (DP_PHY_DIG_PLL_CTL_0[0]) + * pllPwrSeqState enum NV0073_CTRL_DFP_DISP_PHY_PLL_PWR_STATE + * bitRateSel enum NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_SEL + * pdCableIdA NV0073_CTRL_DFP_DISP_PHY_PD_CABLE_ID_A_INFO + * structured view of TOP_TYPEC_IPMUX_PD_CABLE_ID_A + * (DP-rate capability, pin sets, UHBR13.5 support, + * active component type, DP-AM version, ...) + * + * pdCableIdB NV0073_CTRL_DFP_DISP_PHY_PD_CABLE_ID_B_INFO + * structured view of TOP_TYPEC_IPMUX_PD_CABLE_ID_B + * (VCONN source indication) + * + * Status values + * NV_OK + * NV_ERR_INVALID_ARGUMENT invalid subDeviceInstance + * NV_ERR_NOT_SUPPORTED device doesn't have a display + */ + +#define NV0073_CTRL_DFP_DISP_DP_PADLINK_COUNT 4U + +// eDP clock source selection (EDP_PHY_DIG_MISC[3:0]) +typedef enum NV0073_CTRL_DFP_DISP_PHY_EDP_CLK_SRC { + NV0073_CTRL_DFP_DISP_PHY_EDP_CLK_SRC_NONE = 0, + NV0073_CTRL_DFP_DISP_PHY_EDP_CLK_SRC_SOR0 = 1, + NV0073_CTRL_DFP_DISP_PHY_EDP_CLK_SRC_SOR1 = 2, + NV0073_CTRL_DFP_DISP_PHY_EDP_CLK_SRC_SOR2 = 4, + NV0073_CTRL_DFP_DISP_PHY_EDP_CLK_SRC_SOR3 = 8, +} NV0073_CTRL_DFP_DISP_PHY_EDP_CLK_SRC; + +// eDP PLL frequency selector (EDP_PHY_DIG_BIT_RATE[3:0]) +typedef enum NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_SEL { + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_1_62GHZ = 1, + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_2_16GHZ = 2, + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_2_43GHZ = 3, + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_2_70GHZ = 4, + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_3_24GHZ = 5, + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_4_32GHZ = 6, + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_5_40GHZ = 7, + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_6_75GHZ = 8, + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_8_10GHZ = 9, +} NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_SEL; + +// DP bit-rate selector (DP_PHY_DIG_BIT_RATE[2:0]) +typedef enum NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_SEL { + NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_1_62GHZ = 0, + NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_2_70GHZ = 1, + NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_5_40GHZ = 2, + NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_8_10GHZ = 3, + NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_10_00GHZ = 4, + NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_13_50GHZ = 5, + NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_20_00GHZ = 6, +} NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_SEL; + +// DP_PHY_DIG_MISC[3:0] +typedef enum NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL { + NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL_NONE = 0, + NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL_SOR0 = 1, + NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL_SOR1 = 2, + NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL_SOR2 = 3, + NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL_SOR3 = 4, +} NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL; + +// Type-C mux operating mode (TOP_TYPEC_IPMUX_CTRL[1:0]) +typedef enum NV0073_CTRL_DFP_DISP_PHY_TYPEC_MODE { + NV0073_CTRL_DFP_DISP_PHY_TYPEC_MODE_USB4_2T2R = 0, + NV0073_CTRL_DFP_DISP_PHY_TYPEC_MODE_USB3_2T2R = 1, + NV0073_CTRL_DFP_DISP_PHY_TYPEC_MODE_DP_4T = 2, + NV0073_CTRL_DFP_DISP_PHY_TYPEC_MODE_DP_2T_USB3_1T1R = 3, +} NV0073_CTRL_DFP_DISP_PHY_TYPEC_MODE; + +// Cable orientation (TOP_TYPEC_IPMUX_CTRL[2]) +typedef enum NV0073_CTRL_DFP_DISP_PHY_CABLE_ORIENT { + NV0073_CTRL_DFP_DISP_PHY_ORIENT_UNFLIPPED = 0, + NV0073_CTRL_DFP_DISP_PHY_ORIENT_FLIPPED = 1, +} NV0073_CTRL_DFP_DISP_PHY_CABLE_ORIENT; + +// Safe-mode control (TOP_TYPEC_IPMUX_CTRL[3]) +typedef enum NV0073_CTRL_DFP_DISP_PHY_TYPEC_SAFE_MODE { + NV0073_CTRL_DFP_DISP_PHY_TYPEC_SAFE_MODE_ENABLED = 0, // IP-MUX held in Safe-Mode + NV0073_CTRL_DFP_DISP_PHY_TYPEC_SAFE_MODE_ALT = 1, // Safe-Mode disabled so Alt-Mode allowed +} NV0073_CTRL_DFP_DISP_PHY_TYPEC_SAFE_MODE; + +// TPLL force-value codes (DA_XTP_LN_TPLL_SEL[15:8]) +typedef enum NV0073_CTRL_DFP_DISP_PHY_TPLL_FORCE_VAL { + NV0073_CTRL_DFP_DISP_PHY_TPLL_FORCE_RBR_UHBR13_5 = 57, // RBR / UHBR13.5 + NV0073_CTRL_DFP_DISP_PHY_TPLL_FORCE_HBR_HBR2 = 89, // HBR / HBR2 + NV0073_CTRL_DFP_DISP_PHY_TPLL_FORCE_HBR3 = 121, // HBR3 + NV0073_CTRL_DFP_DISP_PHY_TPLL_FORCE_UHBR10_UHBR20 = 26, // UHBR10 / UHBR20 +} NV0073_CTRL_DFP_DISP_PHY_TPLL_FORCE_VAL; + +// PLL power-sequence state (DP_PHY_DIG_PLL_CTL_0[2:1]) +typedef enum NV0073_CTRL_DFP_DISP_PHY_PLL_PWR_STATE { + NV0073_CTRL_DFP_DISP_PHY_PLL_STATE_PD = 0, + NV0073_CTRL_DFP_DISP_PHY_PLL_STATE_BIAS_ON = 1, + NV0073_CTRL_DFP_DISP_PHY_PLL_STATE_PLL_ON = 2, + NV0073_CTRL_DFP_DISP_PHY_PLL_STATE_LANE_ON = 3, +} NV0073_CTRL_DFP_DISP_PHY_PLL_PWR_STATE; + +// Supported DisplayPort data-rate capability (bits 5:2) +typedef enum NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT { + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT_NONE = 0, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT_UPTO_HBR3 = 1, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT_UHBR10_0 = 2, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT_UPTO_UHBR10_0 = 3, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT_UHBR20_0 = 4, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT_UPTO_HBR3_UHBR20_0 = 5, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT_UHBR10_0_UHBR20_0 = 6, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT_UPTO_UHBR20_0 = 7, +} NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT; + +// SRC / SINK pin-sets advertised by the cable (bits 15:8 / 23:16) +typedef enum NV0073_CTRL_DFP_DISP_PHY_PD_CBL_PIN_CAP { + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_PIN_CD = 12, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_PIN_E = 16, +} NV0073_CTRL_DFP_DISP_PHY_PD_CBL_PIN_CAP; + +// UHBR13.5 support is Boolean, using NvBool + +// Active-component type (bits 29:28) +typedef enum NV0073_CTRL_DFP_DISP_PHY_PD_CBL_ACTIVE_COMP { + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_ACTIVE_PASSIVE = 0, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_ACTIVE_RETIMER = 1, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_ACTIVE_REDRIVER = 2, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_ACTIVE_OPTICAL = 3, +} NV0073_CTRL_DFP_DISP_PHY_PD_CBL_ACTIVE_COMP; + +// DP Alt-Mode version supported by the cable (bits 31:30) +typedef enum NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DPAM_VERS { + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DPAM_VERS_UPTO_2_0 = 0, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DPAM_VERS_2_1_OR_LATER = 1, +} NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DPAM_VERS; + +// VCONN source indication (Cable-ID-B bit 0) +typedef enum NV0073_CTRL_DFP_DISP_PHY_PD_CBL_VCONN_SRC { + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_VCONN_SRC_DPTX = 0, + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_VCONN_SRC_DPRX = 1, +} NV0073_CTRL_DFP_DISP_PHY_PD_CBL_VCONN_SRC; + +// DP mode indicating which type of DP connection is active +typedef enum NV0073_CTRL_DFP_DISP_PHY_DP_MODE { + NV0073_CTRL_DFP_DISP_PHY_DP_MODE_FSDP = 0, // Full Size DP + NV0073_CTRL_DFP_DISP_PHY_DP_MODE_ALT_MODE = 1, // DP Alt Mode + NV0073_CTRL_DFP_DISP_PHY_DP_MODE_TUNNELING = 2, // DP Tunneling +} NV0073_CTRL_DFP_DISP_PHY_DP_MODE; + +typedef struct NV0073_CTRL_DFP_DISP_PHY_PD_CABLE_ID_A_INFO { + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DP_PROT dpProt; + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_PIN_CAP srcPinSet; + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_PIN_CAP sinkPinSet; + NvBool bUhbr13_5; // bit 26 + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_ACTIVE_COMP activeComp; // bits 29:28 + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_DPAM_VERS dpamVers; // bits 31:30 +} NV0073_CTRL_DFP_DISP_PHY_PD_CABLE_ID_A_INFO; + +typedef struct NV0073_CTRL_DFP_DISP_PHY_PD_CABLE_ID_B_INFO { + NV0073_CTRL_DFP_DISP_PHY_PD_CBL_VCONN_SRC vconnSrc; // bit 0 +} NV0073_CTRL_DFP_DISP_PHY_PD_CABLE_ID_B_INFO; + +// DIA (Display Input Adapter) info for DP tunneling +typedef struct NV0073_CTRL_DFP_DISP_PHY_DIA_INFO { + NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL sorSel; // Which SOR for this DIA + NvBool bHpdActive; // HPD on the DIA (DP Tunneling Enabled) + NvBool bSorDpTunnelingEnabled; // SOR assigned to DIA (from sorSel) enabled for Tunneling + NvU32 sorClkMeasuredKHz; // Measured SOR clock rate in KHz (only valid for tunneling) + NvU32 sorClkProgrammedKHz; // Programmed SOR clock rate in KHz (only valid for tunneling) + NvBool bDownspreadEnabled; // 0.5% downspread enabled (DPCD 003h bit 0 && 107h bit 4) +} NV0073_CTRL_DFP_DISP_PHY_DIA_INFO; + +typedef struct NV0073_CTRL_DFP_DISP_PHY_PADLINK_INFO { + // Type-C mux status + NV0073_CTRL_DFP_DISP_PHY_TYPEC_MODE mode; // USB4_2T2R, etc + NV0073_CTRL_DFP_DISP_PHY_CABLE_ORIENT cableOrient; + NvBool bModeStatusDone; // Type-C IP-MUX has finished its "mode-change" power-down / power-up sequence when entering or exiting an alternate mode + NV0073_CTRL_DFP_DISP_PHY_TYPEC_SAFE_MODE safeMode; + + // Data-rate / PLL settings + NV0073_CTRL_DFP_DISP_PHY_TPLL_FORCE_VAL tpllForceVal; + NvBool bTpllForceEn; // 0 = let hardware pick the appropriate TPLL settings automatically, 1 = force the TPLL to use tpllForceVal. + NvBool bPllPwrSeqEn; // 0 = normal automatic power-sequencer operation, 1 = override; the PHY obeys the explicit power state given in pllPwrSeqState. + NV0073_CTRL_DFP_DISP_PHY_PLL_PWR_STATE pllPwrSeqState; + NV0073_CTRL_DFP_DISP_PHY_DP_BIT_RATE_SEL bitRateSel; + + // USB-PD cable identification + NV0073_CTRL_DFP_DISP_PHY_PD_CABLE_ID_A_INFO pdCableIdA; + NV0073_CTRL_DFP_DISP_PHY_PD_CABLE_ID_B_INFO pdCableIdB; + + // HPD and DP mode info + NvBool bHpdActive; // HPD status: active (high) or inactive (low) + NV0073_CTRL_DFP_DISP_PHY_DP_MODE dpMode; // DP mode: FSDP, Alt Mode, or Tunneling + NV0073_CTRL_DFP_DISP_PHY_DP_SOR_SEL sorSel; // SOR connected to padlink (for Alt Mode and FSDP) + NV0073_CTRL_DFP_DISP_PHY_DIA_INFO diaInfo[2]; + + // SOR clock rate info + NvU32 sorClkMeasuredKHz; // Measured SOR clock rate in KHz (from NV_PDISP_SOR_CLK_METER) + NvU32 sorClkProgrammedKHz; // Programmed SOR clock rate in KHz (from DPCD 00100h) + NvBool bDownspreadEnabled; // 0.5% downspread enabled (DPCD 003h bit 0 && 107h bit 4) +} NV0073_CTRL_DFP_DISP_PHY_PADLINK_INFO; + +#define NV0073_CTRL_CMD_DFP_GET_DISP_PHY_INFO (0x731180U) /* finn: Evaluated from "(FINN_NV04_DISPLAY_COMMON_DFP_INTERFACE_ID << 8) | NV0073_CTRL_DFP_GET_DISP_PHY_INFO_PARAMS_MESSAGE_ID" */ + +#define NV0073_CTRL_DFP_GET_DISP_PHY_INFO_PARAMS_MESSAGE_ID (0x80U) + +typedef struct NV0073_CTRL_DFP_GET_DISP_PHY_INFO_PARAMS { + NvU32 subDeviceInstance; + + // eDP-wide settings + NV0073_CTRL_DFP_DISP_PHY_EDP_CLK_SRC edpClkSrc; + NV0073_CTRL_DFP_DISP_PHY_EDP_PLL_FREQ_SEL edpPllFreq; + + // Per-Pad-Link (DP0...DP3) information + NV0073_CTRL_DFP_DISP_PHY_PADLINK_INFO padLink[NV0073_CTRL_DFP_DISP_DP_PADLINK_COUNT]; +} NV0073_CTRL_DFP_GET_DISP_PHY_INFO_PARAMS; + +/* _ctrl0073dfp_h_ */ |